Question 1.
An FCIP between two sites with MDS directors was successfully implemented. Dual FCIP links were connected between the two geographically separate sites. ITCertKeys.com was running a highly available IP network utilizing the HSRP protocol between their ingress/egress routers. Recently a network event caused ITCertKeys.com IT Networking team to change the IP load balancing/HA configuration from HSRP to VRRP. Since making the change the FCIP links have either been down, or worked only intermittently. 

Why would the change to the IP load balancing/HA configuration cause this behavior?

A. The VRRP needs to be implemented on the MDS switches
B. The VRRP protocol will represent the inbound link as a VIP
C. The HSRP and VRRP protocols make no difference with the MDS FCIP link
D. The VRRP protocol is encrypting all of the FCIP traffic and striping the FCIP headers as part of the encryption process

Answer: B

Question 2.
ITCertKeys.com uses ControlCenter SAN Manager to manage their fabric. Some of the SAN administrators prefer to use switch native tools such as command line to do zoning. You have been asked to make zoning changes to the SAN. 

What will you do?

A. Activate zoneset using SAN Manager before any zoning
B. Re-discover the switches in SAN Manager before zoning
C. Use command line to export zones to SAN Manager
D. Zone using command line and export zones to SAN Manager

Answer: B

Question 3.
ITCertKeys.com has a performance issue on their IP network. You find that write I/O's are making multiple round trips between the host initiator and target array. 

What do you do to fix the problem?

A. Write exchange
B. Reduce number of hops
C. Increase the host cache
D. Write acceleration

Answer: D

Question 4.
There are 12 Solaris hosts connected to two fabrics and a DMX2000. All the hosts are dual-pathed using Emulex HBAs. All 12 HBAs in each fabric are connected and zoned to one FA port. Each host is doing 2000 IOPS. Each I/O size is 64KB. Two of the hosts are receiving the following error in their /var/adm/messages file: SCSI transport failed: 
reason 'timeout': retrying command 

What do you advise ITCertKeys.com to do?

A. Use Unix command sysdef queue_depth command to increase the queue_depth
B. Reduce the queue depth of the HBAs reporting the SCSI retry messages in 
    /kernel/drv/lpfc.conf file
C. Reduce the queue depth of the HBA reporting the SCSI retry messages in 
    /kernel/drv/sd.conf file
D. Increase the queue depth of the HBAs reporting the SCSI retry messages in
    /kernel/drv/lpfc.conf file

Answer: B

Question 5.
Which iSCSI discovery method requires the target's IP address, TCP port, and iSCSI target name?

A. Discovery
B. BootP
C. Zero-configuration
D. Static

Answer: D

Question 6.
ITCertKeys.com wants to consolidate their current SAN consisting of four fully populated ED-64M2s, two DS-32M2 switches and two DS-32B2 switches. Current total throughput is 80% of their aggregate bandwidth. Customer anticipates 70% increase in throughput over the next two years. ITCertKeys.com wants ED-64M2. 

How many ED-64M2's are required considering the future growth?

A. 12
B. 8
C. 10
D. 14

Answer: B

Question 7.
Customer has implemented HP-UX Campus Cluster using dual-lock disks. They have experienced "split brain" syndrome in the past. 

What is a permanent fix for this problem?

A. Unlock cluster lock disks
B. Implement a single lock disk
C. Add one more node to both sides of the cluster
D. Implement multiple network and heartbeat configurations for each node in the cluster

Answer: D

Question 8.
Click the Exhibit button. Six I/Os arrive at disk director together. The inter-arrival time is 0. The disk controller is servicing one I/O at a time. The exhibit displays information relevant to average response time. 

What is the average response time?
 
A. 33
B. 5.5
C. 16.83
D. 22.33

Answer: D

Question 9.
Click the Exhibit button. 

What would the fabric display in the diagram look like using Connectrix Manager?
 

A. You would see a single fabric containing all local and remote switches
B. You would only see the local fabric
C. You would not see anything in the display
D. You would see two fabrics displayed independent of each other

Answer: A

Question 10.
Click the Exhibit button. ITCertKeys.com is monitoring their IBM AIX server connected to a DMX using the vmstat command. They are concerned that the host has a disk I/O bottleneck and give you the printout in the exhibit. 

What is the problem?
 

A. HBA bottleneck
B. CPU bottleneck
C. Memory shortage
D. Disk I/O bottleneck

Answer: C

	Web www.certsbraindumps.com