|
Question 1.
Within Cisco's Application and Content Networking Software Version 5 and above, Simplified Hybrid Routing utilizes 2 standard protocols to direct a client to a local CE. What are they?
A. WCCP and proxy
B. Layer 2 redirects and HTTP
C. DNS and WCCP
D. HTTP and HTTPS
E. DNS and HTTP
Answer: E
Question 2.
set response "This line contain the number 200 OK" set code "100" if { ![ regexp "(\[0-9\]+)" $response match code ] }{ puts "error" exit 5001 } puts "Response matches $code" The CSM platform uses TCL script. Looking at the TCL script above, what should be the result of running this script?
A. error
B. Response matches 200 OK
C. Response matches 200
D. Response matches This line contain the number 200 OK
E. Response matches 100
Answer: C
Question 3.
OSPF is defined on a Frame Relay interface providing point-to-multipoint connections. The remote neighbors can reach this central site, but are complaining of routing failures between each of the remote sites. The central router has all the routes for each remote site. Based on this information, what can be diagnosed as the biggest potential problem?
A. An over-subscribed Frame Relay switch will cause some packet loss.
B. There are problems in the use of OSPF Authentication.
C. There is an incorrect selection of the Designated Router.
D. There is an incorrect DLCI assigned on a point-to-point sub-interface.
Answer: C
Question 4.
A router is set up to redistribute routing updates from OSPF to RIP. What answer best describes issues the network administrator needs to be aware of?
A. Split Horizon, Poison Reverse, Hold down
B. Slow convergence, limited hop-count metric, lack of network mask information, periodic
broadcasts
C. None, OSPF is a link-state routing protocol which overcomes issues found in RIP.
D. Difference in metrics (e.g. hops vs. cost), subnet mask allocation/addressing (e.g. VLSM vs.
Fixed subnet mask length), routing protocol summarization (e.g. network boundaries)
Answer: D
Question 5.
What establishes routing table precedence in a routing table?
A. Default metrics
B. Routing priority
C. Type of service
D. Iambic pentameter
E. Administrative distance
Answer: E
Question 6.
Which protocols are used to authenticate users?
A. HMAC-MD5
B. NTLM
C. LDAP
D. S/MIME
E. Diffie-Hellman
Answer: B, C
|
Question 1. Your customer has experienced network problems on his remote IP replication using Celerra Replicator on NAS code 5.4. The customer changes the interface of the replication session and uses a dedicated network. Which steps are needed? A. Use Celerra Manager and change the interface using the properties tab of the replication session B. Use fs_replicate -refresh-o if=interface to start the creation of a new delta set and update the interface C. Abort replication and setup replication using the new interface D. Suspend replication and restart replication using the interface option Answer: D Question 2. What is the minimum number of file systems required to support the VTLU in the diagram? Exhibit: A. 1 B. 32 C. 2 D. 4 Answer: A Question 3. Which two [2] network protocols does the Celerra support? A. ARP and RIP B. RIP and OSPF C. PAgP and ARP D. ARP and OSPF Answer: A Question 4. You are planning to create a remote Replication on the upcoming weekend and you want to estimate the amount of time the initial fs_copy takes. Select the right formula to calculate the time (0.8 = Network overhead. The assumption is the PFS is full.) A. Full fs_copy time (h) = PFS size (GB) / Network bandwidth (MB/sec) * 1024 / (3600 * 0.8) B. Full fs_copy time (h) = PFS size (GB) * Update ratio (%) / 1024 / 100 /24 / (3600 * 0.8) C. Full fs_copy time (h) = PFS size (MB) / Network bandwidth (MB/sec) * 1024 / (3600 * 0.8) D. Full fs_copy time (h) = PFS size (GB) * Update ratio (%) / 1024 / 100 /24 / 3600 / 0.8 Answer: A Question 5. Your customer uses quotas on existing Windows server and wants to implement tree quotas on their new Celerra. The data is strictly home directories with no .pst files. Which tool would you use to migrate this filesystem from the Windows server to the Celerra? A. After creating tree quotas use fscopy B. CDMS assigning tree quotas once data is migrated C. After creating tree quotas use emcopy to migrate data D. Celerra Replicator assigning tree quotas once data is replicated Answer: C Question 6. Your NS704G customer is using the default CLARiiON "prefetch multiplier" and "segment multiplier" settings. In most all cases, what will be the size of the prefetched data for the Celerra? A. 32KB B. 64KB C. 128KB D. 16KB Answer: A Question 7. The customer states that their windows clients are experiencing poor performance when viewing properties of a Celerra network drive. Which stats would you look for in the server_cifsstat command? A. TreeDisco B. CloseTreeDisco C. QFsInfo D. QFileInfo Answer: C Question 8. The GGG Corporation is using SRDF/A and had to failover to the second site. There are NS700G's installed on both sites. Your colleagues issued the command to perform a restore. What should be done next? Exhibit: A. Enter the command nasmcd/sbin/nas_rdf -restore B. Enter the command nasmcd/sbin/nas_rdf -init C. Stop the NAS service as root; enter the command nasmcd/sbin/nas_rdf -restore D. Stop the NAS service; enter the command nasmcd/sbin/nas_rdf -restore Answer: C Question 9. Which statement is true? A. Near/FarCopy cannot be used in NSX00 environments but in all NSX00G environments B. FarCopy cannot use remote Timefinder/FS with a Symmetrix/DMX SRDF campus solution C. NearCopy uses Timefinder/FS in a SRDF campus solution and operates in synchronous mode D. Timefinder/FS is a volume oriented point in time copy using a Symmetrix/DMX Backend Answer: C Question 10. DRAG DROP Click the Task button. In a Kerberos Ticket Exchange, three exchanges are involved when the client initially accesses a server resource. As shown in the diagram, label each of the three exchanges. Exhibit: Answer:
Copyright © 2004 CertsBraindumps.com Inc. All rights reserved.