|
Question 1.
Which step is necessary to enable administrators to use the web interface to make configuration changes on a ProCurve Routing Switch 9300m?
A. Configure local user accounts.
B. Assign a password to the system-defined super user.
C. Configure SNMP management workstations at the CLI.
D. Define a read/write SNMP community.
Answer: D
Question 2.
What is a difference between the configuration of IP addresses on the ProCurve Routing Switch 9300m and the Switch 5300xl?
A. On the 9300m, IP addresses are assigned to port interfaces associated with VLANs.
On the 5300xl, IP addresses are assigned directly to VLANs.
B. On the 9300m, IP addresses are assigned to virtual interfaces associated with VLANs.
On the 5300xl, IP addresses are assigned directly to VLANs.
C. On the 9300m, IP addresses are always assigned directly to ports, with ports in a VLAN
sharing the same address. On the 5300xl, the IP addresses can be configured only for VLANs
and not for individual ports.
D. On the 9300m, a VLAN must have an IP address in order to be active. On the 5300xl, VLANs
do not require IP addresses.
Answer: B
Question 3.
The global context in the running configuration of a ProCurve Routing Switch 9300m includes the spanning-tree single 802-1w command. However, each of the VLAN contexts includes the spanning-tree command.
How will the switch implement Spanning Tree?
A. The switch will implement the Spanning Tree version included in BPDUs it receives from
neighbors.
B. The switch will implement a single instance of IEEE 802.1w.
C. The switch will not join a Spanning Tree because of the mismatch between configured
versions.
D. The switch will implement per-VLAN IEEE 802.1D and ignore the global configuration
command.
Answer: B
Question 4.
Clients in two separate subnets are associated with VLAN 40 on a ProCurve Routing Switch 9300m.
Which technology must be implemented in order for the 9300m to provide default gateway service to all clients?
A. Policy Based Routing
B. variable subnet masks
C. Network Address Translation
D. multi netting
Answer: D
Question 5.
On a ProCurve Routing Switch 9300m, the output of the show ip ospf int command shows that the BDR Router ID for interface ve 79 is 0.0.0.0.
What does this indicate?
A. Routes through ve 79 are summarized.
B. The 9300m is the BDR for interface ve 79.
C. The 9300m has no neighbors on interface ve 79.
D. No OSPF area has been configured for interface ve 79.
Answer: C
Question 6.
What is a difference between the three models in the ProCurve Routing Switch 9300m series?
A. the number of available module slots
B. the size of the frame buffer
C. the number of supported routing protocols
D. the number of supported Layer 3 protocols
Answer: A
Question 7.
ITCertKeys.com network includes Novell NetWare legacy IPX clients.
Which ProCurve switch can route packets on behalf of these clients?
A. 3400cl
B. 4100gl
C. 5300xl
D. 9300m
Answer: D
Question 8.
Which routing protocols are supported by the ProCurve 9300m Routing Switch series?
A. MPLS, OSPF, RIP
B. BGP, OSPF, RIP
C. BGP, IS/IS, OSPF
D. IGRP/EIGRP, OSPF, RIP
Answer: B
Question 9.
Which statement is true regarding the management module of the ProCurve Routing Switch 9300m?
A. All transiting traffic is forwarded to the CPU on the management module for lookup using its
routing table.
B. The management module contains the master forwarding engine that handles all transiting
traffic.
C. The console port on the management module provides an out-of-band serial connection.
D. The management module can assume forwarding responsibilities on behalf of any failed port
module in the switch.
Answer: C
Question 10.
How many ports are available on a 10GbE port module for the ProCurve Routing Switch 9300m?
A. 2
B. 4
C. 8
D. 16
|
Question 1.
Which two characteristics of optical networks data to be transmitted over extremely long distances? (Choose two.)
A. No electromagnetic interference (EMI)
B. Minimal signal loss
C. No bandwidth limits
D. No encryption
Answer: A, B
Question 2.
What is a wide-area network (WAN)?
A. A network that is restricted to a single building, a group of buildings, or even a single room
B. A network that connects client devices wirelessly using radio waves
C. A network that crosses metropolitan, regional or national boundaries
D. A network that encompasses an entire city or metropolitan area and connects multiple local-
area networks (LANs)
Answer: C
Question 3.
Which IP telephony component provides call processing, such as signaling that in a traditional voice network is provided by switching equipment, such as a PBX?
A. Voice gateways, such as the Cisco VG248 analog phone gateway
B. Call-management hardware and software, such as Cisco Call Manager
C. Client-based software, such as Cisco SoftPhone
D. Advanced call-handling software, such as Cisco Unity
Answer: B
Question 4.
A software engineering firm wants to streamline call center operations to reduce customer wait times and improve employee productivity.
Which Cisco solution best matches this business need?
A. IP Telephony
B. DSL
C. WLAN
D. Optical Network
Answer: A
Question 5.
A growing publishing firm needs a secure way for remote content editors to connect through the Internet to the company extranet.
Which Cisco solution best matches this business need?
A. IP telephony
B. Virtual Private Network (VPN)
C. Content Networking
D. Wireless network
Answer: B
Question 6.
What creates an encrypted tunnel through a shared public network infrastructure, such as the Internet to provide a secure connection between remote users and a private network?
A. VPN
B. HTTP
C. DSL
D. Optical Networking
Answer: A
Question 7.
What does a router do?
A. Reads Media Access Control (MAC) addresses to forward messages to the correct location
and connects the local-area network (LAN) to the wide-area network (WAN)
B. Stores data on network and connects the local-area network (LAN) to the wide-area network
(WAN)
C. Routes traffic down alternative paths and connects the local-area network (LAN) to the wide-
area network (WAN)
D. Broadcasts data to all devices that are connected to it across the local-area network (LAN) and
wide-area network (WAN)
Answer: C
Question 8.
Which device is used in wireless networks to send transmission to a target area?
A. Directional Antenna
B. Optical fiber
C. Omni-directional antenna
D. Access point
Answer: A
Question 9.
Which wireless local-area network (WLAN) device is often used to make wireless connections between buildings or campuses?
A. Access Point
B. Bridge
C. Router
D. Client Adapter
Answer: B
Question 10.
On what type of network does the Cisco Unified Communications system reside?
A. A single, joined voice, video and data network
B. Voice networks only
C. Wireless networks only
D. Data networks only
E. Independent voice, video and data networks
Answer: A
Copyright © 2004 CertsBraindumps.com Inc. All rights reserved.