Question 1.
The following is cphaprob state command output from a ClusterXL New mode High Availability member 

When member 192.168.1.2 fails over and restarts, which member will become active?
 

A. 192.168.1.2
B. 192.168.1 1
C. Both members' state will be standby
D. Both members' state will be active

Answer: B

Question 2.
What is the command to upgrade a SecurePlatform NG with Application Intelligence (Al) R55 SmartCenter Server to VPN-1 NGX using a CD?

A. cd patch add
B. fwm upgrade_tool
C. cppkg add
D. patchadd
E. patch addcd

Answer: E

Question 3.
You have a production implementation of Management High Availability, at version VPN-1 NG with Application Intelligence R55. You must upgrade your two SmartCenter Servers to VPN-1 NGX.

What is the correct procedure?

A. 1. Synchronize the twoSmartCenter Servers.
2. Upgrade the secondary SmartCenter Server.
3. Upgrade the primary SmartCenter Server.
4. Configure both SmartCenter Server host objects version to VPN-1 NGX.
5. Synchronize the Servers again.
B. 1. Synchronize the two SmartCenter Servers.
    2. Perform an advanced upgrade on the primary SmartCenter Server.
3. Upgrade the secondary SmartCenter Server.
4. Configure both SmartCenter Server host objects to version VPN-1 NGX.
5. Synchronize the Servers again.
C. 1. Perform an advanced upgrade on the primary SmartCenter Server.
   2. Configure the primary SmartCenter Server host object to version VPN-1 NGX.
3. Synchronize the primary with the secondary SmartCenter Server.
4. Upgrade the secondary SmartCenter Server.
5. Configure the secondary SmartCenter Server host object to version VPN-1 NGX.
6. Synchronize the Servers again.
D. 1. Synchronize the two SmartCenter Servers.
   2. Perform an advanced upgrade on the primary SmartCenter Server.
3. Configure the primary SmartCenter Server host object to version VPN-1 NGX.
4. Synchronize the two Servers again.
5. Upgrade the secondary SmartCenter Server.
6. Configure the secondary SmartCenter Server host object to version VPN-1 NGX.
7. Synchronize the Servers again.

Answer: B

Question 4.
Your primary SmartCenter Server is installed on a SecurePlatform Pro machine, which is also a VPN-1 Pro Gateway. You want to implement Management High Availability (HA). You have a spare machine to configure as the secondary SmartCenter Server. How do you configure the new machine to be the standby SmartCenter Server, without making any changes to the existing primary SmartCenter Server? (Changes can include uninstalling and reinstalling.)

A. You cannot configure Management HA, when either the primary or secondary SmartCenter 
    Server is running on a VPN-1 Pro Gateway.
B. The new machine cannot be installed as the Internal Certificate Authority on its own.
C. The secondary Server cannot be installed on a SecurePlatform Pro machine alone.
D. Install the secondary Server on the spare machine. Add the new machine to the same network 
    as the primary Server.

Answer: A

Question 5.
You are preparing computers for a new ClusterXL deployment. For your cluster, you plan to use four machines with the following configurations: 
Cluster Member 1: OS: SecurePlatform, NICs: QuadCard, memory: 256 MB, Security Gateway
version: VPN-1 NGX
Cluster Member 2: OS: SecurePlatform, NICs: four Intel 3Com, memory: 512 MB, Security
Gateway version: VPN-1 NGX
Cluster Member 3: OS: SecurePlatform, NICs: four other manufacturers, memory: 128 MB,
Security Gateway version: VPN-1 NGX
SmartCenter Pro Server: MS Windows Server 2003, NIC: Intel NIC (one), Security Gateway and primary SmartCenter Server installed version: VPN-1 NGX

Are these machines correctly configured for a ClusterXL deployment?

A. No, theSmartCenter Pro Server is not using the same operating system as the cluster 
    members.
B. Yes, these machines are configured correctly for aClusterXL deployment.
C. No, Cluster Member 3 does not have the required memory.
D. No, the SmartCenter Pro Server has only one NIC.

Answer: B

Question 6.
You set up a mesh VPN Community, so your internal networks can access your partner's network, and vice versa. Your Security Policy encrypts only FTP and HTTP traffic through a VPN tunnel. All other traffic among your internal and partner networks is sent in clear text. 

How do you configure the VPN Community?

A. Disable "accept all encrypted traffic", and put FTP and HTTP in the Excluded services in the 
    Community object. Add a rule in the Security Policy for services FTP and http, with the  
    Community object in the VPN field.
B. Disable "accept all encrypted traffic" in the Community, and add FTP and HTTP services to the 
     Security Policy, with that Community object in the VPN field.
C. Enable "accept all encrypted traffic", but put FTP and HTTP in the Excluded services in the 
    Community. Add a rule in the Security Policy, with services FTP and http, and the Community  
    object in the VPN field.
D. Put FTP and HTTP in the Excluded services in the Community object. Then add a rule in the 
    Security Policy to allow Any as the service, with the Community object in the VPN field.

Answer: B

Question 7.
How does a standby SmartCenter Server receive logs from all Security Gateways, when an active SmartCenter Server fails over?

A. The remote Gateways must set up SIC with the secondarySmartCenter Server, for logging.
B. Establish Secure Internal Communications (SIC) between the primary and secondary Servers. 
    The secondary Server can then receive logs from the Gateways, when the active Server fails  
    over.
C. On the Log Servers screen (from the Logs and Masters tree on the gateway object's General  
    Properties screen), add the secondary SmartCenter Server object as the additional log server.  
    Reinstall the Security Policy.
D. Create a Check Point host object to represent the standby SmartCenter Server. Then select  
    "Secondary SmartCenter Server" and Log Server", from the list of Check Point Products on the  
    General properties screen.
E. The secondary Server's host name and IP address must be added to the Masters file, on the 
    remote Gateways.

Answer: C

Question 8.
You want only RAS signals to pass through H.323 Gatekeeper and other H.323 protocols, passing directly between end points. 

Which routing mode in the VoIP Domain Gatekeeper do you select?

A. Direct
B. Direct and Call Setup
C. Call Setup
D. Call Setup and Call Control

Answer: A

Question 9.
Which component functions as the Internal Certificate Authority for VPN-1 NGX?

A. VPN-1 Certificate Manager
B. SmartCenterServer
C. SmartLSM
D. Policy Server
E. Security Gateway

Answer: B

Question 10.
You are configuring the VoIP Domain object for a Skinny Client Control Protocol (SCCP) environment protected by VPN-1 NGX. 

Which VoIP Domain object type can you use?

A. CallManager
B. Gatekeeper
C. Gateway
D. Proxy
E. Transmission Router

Answer: A

	Web www.certsbraindumps.com