|
Question 1.
When Jerald's company developed a new application for Workplace Services Express, it did not fit into any of the categories of previous applications, such as Team Spaces or Document Libraries.
In addition to creating a new category, what else must he do to make the application available for users?
A. Nothing, the application will show up with others
B. Create a new application catalog list
C. Create an application catalog portlet to list all applications belonging to the new category and a
page to contain the new application catalog portlet
D. Create a new page with a link to the new application
Answer: C
Question 2.
Where would Julie navigate to specify the e-mail address for policy notifications to the administrator?
A. The Manage Workplace Applications Policies panel in the WebSphere Administrative Console,
in the Administrator e-mail address field
B. Using Navigate Properties.config, the wmc.mail.replyto configuration variable
C. The Application Library
D. Administration->Portal Settings->Application Messaging
Answer: A
Question 3.
What limitations are there for users who are in Melissa's organization and who have roles on resources that are toward the bottom of the resource hierarchy?
A. They must know the resource URL for their resources.
B. If they do not have roles on parent resources, the users may become confused because they
can still see the navigation entities on these parent resources.
C. They cannot see their resources if they do not have roles on parent resources.
D. They must have at least Editor role on lower-level resources.
Answer: B
Question 4.
After installation, Dan decides to integrate with an existing external LDAP server.
What is the first step he takes in this integration?
A. Copies configuration files to the LDAP server
B. Installs the LDAP server on the Workplace Services Express server
C. Starts Workplace Services Express and log in
D. Disables global security
Answer: D
Question 5.
How does ITCertKeys get to the User and Group Permissions portlet?
A. She navigates to User and Group Permissions in the WebSphere Administrative Console
B. She navigates to Administration > Access > User and Group Permissions
C. She navigates to Administration > Security > User and Group Permissions
D. She navigates to Administration > Portal Settings > User and Group Permissions
Answer: B
Question 6.
How does resource ownership happen?
A. Users must be assigned ownership of a resource by an Administrator or another resource
owner in the same application.
B. Resource ownership is delegated by users with Delegator roles, or by Privileged Users.
C. When a user creates a new resource, such as a page, that user automatically becomes the
owner of that resource.
D. Administrators set resource ownership in the Advanced LDAP section of the WebSphere
Administrative Console.
Answer: C
Question 7.
Rocky has installed Workplace Services Express for a client, whose native language is different from his own.
How can he change the default language after installation and configuration?
A. He cannot, this is chosen on installation.
B. It is located in the Administrative Console.
C. He uses in Administration->Portal settings->Global settings in WSE to make the change.
D. He must run wpsconfig language-enable <language choice> from the command line.
Answer: C
Question 8.
When Jerald's company developed a new application for Workplace Services Express, it did not fit into any of the categories of previous applications, such as Team Spaces or Document Libraries.
In addition to creating a new category, what else must he do to make the application available for users?
A. Create a new application catalog list
B. Nothing, the application will show up with others
C. Create an application catalog portlet to list all applications belonging to the new category and a
page to contain the new application catalog portlet
D. Create a new page with a link to the new application
Answer: C
Question 9.
An executive has asked Bob to give his Team Space a URL that she can remember.
How can he do this?
A. Set up redirects on the LDAP server with the user's landing page
B. Store friendly names in httpd.conf on the file system
C. Go to the executive's browser and create a shortcut for her
D. Use URL Mapping in Portal Settings to assign a friendly name
Answer: D
Question 10.
What provides the common schema that contains a set of attributes for people, groups, organizations and organizational units to support People Finder?
A. WPS directory.properties file
B. Directory Search
C. People Finder portlet configuration parameters
D. WebSphere Member Manager
Answer: D
|
Question 1.
LSC validation is failing on a new SCCP IP phone that you have just added to the Cisco Unified CallManager 5.0 cluster. No other IP phones are experiencing any problems with LSC validation.
What can you do to help pinpoint the problem?
A. Check for security alarms
B. Verify that the authentication string is correct in the Cisco Unified CallManager device
configuration screen
C. View the SDI trace output
D. Use the Security configuration menu on the IP phone to verify that an LSC has been
downloaded to the IP phone
Answer: D
Question 2.
Which three capabilities can't be configured if the default dial peer is matched? (Choose three.)
A. Set preference to 1
B. Invoke a Tcl application
C. Enable dtmf-relay
D. Set codec to G.711
E. Disable DID
F. Disable VAD
Answer: B, C, F
Question 3.
When using trace output to troubleshooting a Cisco Unified CallManager 5.0 problem, how can you collect and view the trace files?
A. Configure the proper trace settings on the Cisco Unified CallManager Serviceability page and
then use the embedded RTMT tool to view the trace files
B. Configure the proper trace settings on the Cisco Unified CallManager Serviceability page and
download the RTMT plug-in from the CallManager Administration page to view the trace output
C. Download the RTMT plug-in from the Cisco Unified CallManager Serviceability page to view
the preconfigured trace files
D. Configure the proper alarms and traces on the Cisco Unified CallManager Administration page
and view the output with the RTMT plug-in
Answer: B
Question 4.
You are troubleshooting why a user can't make calls to the PSTN. You are reviewing trace files and you found where the user's IP phone initiates the call but you never see the call go out the gateway.
What is the next step in troubleshooting this issue?
A. Look in the SDL trace file to see if there is a signal to another Cisco Unified CallManager node
with the same time-stamp
B. Look in the MGCP trace file to determine which MGCP gateway the call was sent to
C. Look in the IP Voice Media Streaming APP trace file to see if an MTP was invoked
D. Look in the SDL trace file to see if there is a signal to anther Cisco Unified CallManager node
with the same TCP handle
Answer: A
Question 5.
Exhibit:
Your work as a network engineer at ITCertKeys.com. Please study the exhibit carefully.
Voice bearer traffic is mapped to which queue in FastEthernet0/2?
A. Queue 2
B. Queue 3
C. Queue 1
D. Queue 4
Answer: A
Question 6.
Exhibit:
Your work as a network engineer at ITCertKeys.com. Please study the exhibit carefully. You have received a trouble ticket stating that calls to international numbers are failing. To place an international call, users dial the access code, "9," followed by "011", the country code and the destination number. After entering the debug isdn 1931 command on the MGCP gateway, you have the user attempt the call again.
Base on the debug output, what is the most likely cause of this problem?
A. The TON in incorrect
B. The circuit is not configured correctly or has a physical layer issue
C. Cisco Unified CallManaager is not stripping the access code before sending the call to the
gateway
D. The gateway dial peer needs to prefix "011" to the called number so the PSTN knows this is
an internation call
E. The user's CSS does not permit international calls
Answer: A
Question 7.
You have developed a dial plan for Cisco Unified CallManager 5.0 solution. All the route patterns, partitions, calling search spaces and translation rules have been configured. Before starting up the system you wish to test the dial plan for errors.
Which Cisco Unified CallManager tool will simplify this testing?
A. Route Plan Report
B. Dial Plan Installer
C. Dialed Number Analyzer
D. RTMT Traces and Alarms
Answer: C
Question 8.
You have just obtained a list of the following options:
all patterns
unassigned DN
Call Park
Conference
Directory Number
Translation Pattern
Call pickup group
Route pattern
Message waiting
Voice mail
Attendant console
What have you selected in order to produce this list?
A. Route Plan > External Route Plan Wizard
B. Control Center > Feature Services
C. Route Plan > Route Plan Report
D. Dialed Number Analyzer
Answer: C
Question 9.
You have configured the Enable Keep Alive check under Trace Filter settings.
How does this change the trace output?
A. It adds the IP address of the endpoint in hex
B. It maps the unique TCP handle for the endpoint to the MAC address of the endpoint in the
trace output
C. It adds the SCCP messages and all fields sent as part of that message
D. It adds TCP socket numbers between the endpoint and Cisco Unified CallManager for the
session
Answer: B
Question 10.
When using trace output to troubleshooting a Cisco Unified CallManager 5.0 problem, how can you collect and view the trace files?
A. Configure the proper trace settings on the Cisco Unified CallManager Serviceability page and
download the RTMT plug-in from the CallManager Administration page to view the trace output
B. Configure the proper alarms and traces on the Cisco Unified CallManager Administration page
and view the output with the RTMT plug-in
C. Download the RTMT plug-in from the Cisco Unified CallManager Serviceability page to view
the preconfigured trace files
D. Configure the proper trace settings on the Cisco Unified CallManager Serviceability page and
then use the embedded RTMT tool to view the trace files
Answer: A
Copyright © 2004 CertsBraindumps.com Inc. All rights reserved.