|
Question 1.
A customer wishes to port an application from OpenVMS/VAX to OpenVMS/Alpha.
The primary data file contains records with the format:
LONG, F_FLOAT, 256 element G_FLOAT array, WORD, 64 element LONG array In application memory the entire record is quad word aligned. Both the LONG and G_FLOAT arrays are involved in intensive computation.
What conversion, if any, should be recommended to maximize performance on the Alpha platform?
A. Nothing, there will be no significant performance impact.
B. Convert the G_FLOAT array to D_FLOAT.
C. Convert the LONG array to QUADWORDs.
D. Expand the WORD field to QUADWORD.
Answer: D
Question 2.
A process is not responding. When troubleshooting, what state is the process in when it is capable of being scheduled?
A. RWAST
B. LEF
C. HIB
D. COM
Answer: D
Question 3.
What needs to be specified to create two hard partitions on an Alpha Server on a GS80 system with 8 CPU's?
A. 1 master PCI shelf and 1 expansion PCI shelf
B. 2 master PCI shelves on one QBB
C. 1 master PCI shelf
D. 2 master PCI shelves, one on each QBB
Answer: D
Question 4.
Which category from the MONITOR PAGE display indicates a hard page fault?
A. Page Read I/O Rate
B. Demand Zero Fault Rate
C. Free List Fault Rate
D. Modified List Fault Rate
Answer: A
Question 5.
Which pair of interconnects support a multi-site cluster separated by more than 50km?
A. CI and Memory Channel
B. CI and FDDI
C. Memory Channel and Fibre Channel
D. Fibre Channel and Ethernet
Answer: D
Question 6.
Which license is required to use an instance in an Adaptive Partition Multi Processing environment?
A. VMSCLUSTER
B. VMSCLUSTER-GALAXY
C. OPENVMS-GALAXY
D. OPENVMS-CLUSTER
Answer: C
Question 7.
Which wwidmgr command is used to set up a device for booting or dumping?
A. The wwidmgr command is not used for this set up.
B. wwidmgr -quickset -udid 10
C. wwidmgr - quickset -udid dga10.1001.0.2.1
D. wwidmgr -quickset -device dga10.1001.0.2.1 -udid 10
Answer: B
Question 8.
Which command displays current products installed and registered?
A. TYPE SYS$UPDATE: VMSINSTAL.HISTORY
B. PRODUCT SHOW HISTORY
C. PRODUCT SHOW PRODUCT
D. SHOW SYSTEM
Answer: C
Question 9.
What are advantages of Fibre Channel multi bus failover compared to transparent failover?
Select TWO.
A. lower disk latencies
B. higher availability
C. lower CPU overhead
D. lower cost
E. higher aggregate performance
Answer: B, E
Question 10.
Which action may help isolate the cause of a reproducible executive mode exception?
A. Create a process dump using the SET PROCESS/BUGCHECK_DUMP command.
B. Analyze the bug check error message from the operator log file.
C. Create a system dump file by setting the parameter BUGCHECKFATAL to 1.
D. Analyze the program bug check registers from the system error log entry.
Answer: C
Question 11.
Which tasks are performed by the SECURITY_SERVER Process? Select TWO.
A. Performs network connection authentication
B. Manages the system's intrusion database
C. Manages intra-cluster Single Sign-on
D. Performs interactive logon authentication
E. Manages the system's network proxy database
Answer: B, E
Question 12.
The current value of NPAGEDYN is 24,000,000. Installation of a layered product requires non paged dynamic memory to be increased by 60,000 bytes.
Which command sequence is correct?
A. $ MCR SYSMAN
SYSMAN> SET ENVIRONMENT/CLUSTER
SYSMAN> PARAMETER SET NPAGEDYN 24060000
SYSMAN> PARAMETER WRITE ACTIVE
SYSMAN> EXIT
B. $ MCR SYSGEN
SYSGEN> SET NPAGEDYN 60000
SYSGEN> EXIT
Reboot the system
C. $ SET MEMORY/NPAGEDYN=24060000
$ @SYS$UPDATE:AUTOGEN SAVPARAMS SETPARAMS
Reboot the system
D. $ APPEND SYS$SYSTEM: MODPARAMS.DAT SYS$INPUT:
ADD_NPAGEDYN=60000
$ @SYS$UPDATE:AUTOGEN SAVPARAMS SETPARAMS
Reboot the system
Answer: D
Question 13.
Which utility manages and monitors cluster communications over LAN adapters?
A. LANCP
B. SYSGEN
C. MONITOR
D. SCACP
Answer: D
Question 14.
Which OpenVMS software allows OpenVMS client access to files on UNIX servers?
A. Compaq Secure Web Server
B. The NFS component of TCPIP Services
C. Compaq Advanced Server for OpenVMS
D. Open VMS Galaxy Software
Answer: B
Question 15.
SYSMAN commands are not executing as expected in the cluster.
When troubleshooting, it is helpful to know that the SMISERVER process is normally in which state?
A. HIB
B. CUR
C. CEF
D. COM
Answer: A
Question 16.
The users are reporting that the system appears to be running slower than normal. The information displayed by a $MONITOR MODES command indicates that the INTERRUPT mode usage is much higher than normal.
What needs to be investigated as a possible cause?
A. Excessive use of RMS is occurring.
B. DCL programs are being run on the system.
C. There has been an increase in distributed lock processing.
D. The base priority of users has been increased.
Answer: C
Question 17.
Which statement is TRUE about planning a common system management environment for a cluster?
A. Alpha Server and VAX systems can share a common system disk.
B. Alpha Server and VAX systems can share a common queue file.
C. Open VMS nodes that share a common system disk must also share a single user
authorization file.
D. Open VMS nodes that do not share a common system disk may not share a single user
authorization file.
Answer: B
Question 18.
Which command displays the SRM firmware version?
A. $ SHOW CONSOLE/VERSION
B. SDA> CLUE CONFIG
C. SDA> SHOW SRM
D. $ SHOW SRM/VERSION
Answer: B
Question 19.
The Queue Manager will not start on a system.
Which system process may not be running?
A. IPCACP
B. LANACP
C. REMACP
D. LATACP
Answer: A
Question 20.
The system is performing slower than expected. Which mode would show increased activity if the problem was Spinlock Contention?
A. MP Synchronization
B. Interrupt Mode
C. Kernel Mode
D. Exec Mode
Answer: A
Question 21.
In the MONITOR MODES display, a high value in which mode indicates spin lock contention?
A. Kernel Mode
B. MP Synchronization
C. Interrupt Stack
D. Supervisor Mode
Answer: B
Question 22.
Which system process must be running to automatically find new MSCP served storage devices?
A. SHADOW_SERVER
B. IPCACP
C. JOB_CONTROLLER
D. CONFIGURE
Answer: D
Question 23.
Which post-upgrade task can improve performance on an OpenVMS Alpha Server system?
A. $ @SYS$UPDATE:LIBDECOMP.COM
B. $ @SYS$UPDATE:CONSCOPY.COM
C. $ @SYS$UPDATE:VMSINSTAL.COM
D. $ @SYS$UPDATE:DECOMPLIB.COM
Answer: A
Question 24.
A standalone Alpha Server system appears to hang while loading a system file during its boot sequence.
Which command can be used to reboot the system and track files as they are loaded?
A. boot -console 20000,0 <device>
B. boot -console 0,20000 <device>
C. boot -flag 20000,0 <device>
D. boot -flag 0,20000 <device>
Answer: D
Question 25.
Upon completion of an I/O request, which mechanism is used to get from system context into process context?
A. Lock Manager Interrupt
B. Page Fault
C. Timer Queue Entry
D. Asynchronous System Trap
Answer: D
Question 26.
What is the supported value of the SHADOWING system parameter to enable Volume Shadowing?
A. 0
B. 1
C. 3
D. 2
Answer: D
Question 27.
After installing an FDDI adapter, the system manager activates TCPIP on the interface with the command:
TCPIP> SET INTERFACE FF0 /HOST=KESTREL /NETWORK_MASK=255.255.0.0
/BROADCASTMASK=128.30.0.0 /ARP
After the next reboot, TCPIP is not running on the interface.
What should have been done to ensure the interface was started automatically when the system rebooted?
A. Modify VMS$DEVICE_STARTUP.COM to configure the interface.
B. Issue a TCPIP DEFINE INTERFACE command.
C. Modify TCPIP$SYSTARTUP.COM to configure the interface.
D. Issue a TCPIP SET CONFIGURATION INTERFACE command.
Answer: D
Question 28.
Which command associates a process or initial thread with a specific processor in an SMP system?
A. SET PROCESS / PERMANENT / SET=1
B. SET PROCESS / CAPABILITY / SET=1
C. SET PROCESS / ASSOCIATION / SET=1
D. SET PROCESS / AFFINITY / SET=1
Answer: D
Question 29.
Which locking mechanism can be used to make applications aware of locking contention?
A. Multiple Lock Resources
B. Completion AST's
C. Multiple Lock Blocks
D. Blocking AST's
Answer: D
Question 30.
When performing a conversational reboot of an Alpha Server the system manager issues the following commands:
SYSBOOT> SET/START OPA0
SYSBOOT> CONTINUE
What is the result of this action?
A. System completes MINIMUM boot.
B. File not found message is displayed.
C. System boots normally.
D. System crashes.
Answer: B
Question 31.
Where is pooled quota information found?
A. The process's JIB information under SDA
B. The process's PHD information under SDA
C. The SHOW PROCESS/CONTINUOUS display
D. The SYSUAF quota information for the process
Answer: A
Question 32.
A customer is building a low cost multi-site cluster. ITCertKeys.com plans to have two nodes separated by 25km, each with a single HSG controller. The sites are connected with a single Fibre Channel interconnect.
What else is required to make a viable Open VMS cluster configuration?
A. DRM between the controllers for data protection
B. A second Fibre Channel interconnect for redundancy
C. Local SCSI or CI storage for the system disks
D. A LAN interconnect on which to run SCS traffic
Answer: D
Question 33.
Which system process is unique to Open VMS Cluster nodes?
A. SECURITY_SERVER
B. AUDIT_SERVER
C. CACHE_SERVER
D. QUEUE_MANAGER
Answer: C
Question 34.
Fast Path is enabled on an SMP system, but all I/O operations appear to be using the primary CPU.
Which parameter should be checked?
A. PREFERRED_PATH
B. IOPREFER_CPUS
C. PREFERRED_CPU
D. CPU_AFFINITY
Answer: B
Question 35.
ITCertKeys.com is using an OpenVMS cluster as shown in this exhibit. The user application is running on ALPHA1 and ALPHA2. Node ALPHA3 exists only as a quorum node.
How do you set up the configuration to place all the Cluster Environmental Files so that a user can login, if either ALPHA1 or ALPHA2 fails?
A. Build a shadow set of $1$DKA0 and $2$DKA0 and use it as a common system disk
B. Copy Cluster Environmental Files to both system disks $1$DKA0 and $2$DKA0
C. Build a new shadow set of $1$DKB0 and $2$DKB0 for the Cluster Environmental Files
D. Place Cluster Environmental Files on a new shadow set $1$DKA0 and $2$DKC0
Answer: C
Question 36.
Which command procedure adds a satellite node to an OpenVMS cluster that uses TCP/IP as the networking transport?
A. CLUSTER_CONFIG.COM
B. CLUSTER_CONFIG_LAN.COM
C. SYSTARTUP_VMS.COM
D. TCPIP$CONFIG.COM
Answer: B
Question 37.
User LUCRE reported a problem using a tape drive MKA500. He attempted to use ^Y to abort the task, but his process remained unresponsive and the tape drive remains inaccessible to other users.
Which action will most likely restore access to the tape?
A. $ STOP/ID=20200145
B. $ DEALLOCATE MKA500
C. Use AMDS to increase ASTLM
D. Reboot the system
Answer: D
Question 38.
Which interconnect can support both node-to-node and shared storage communications?
A. SCSI
B. CI
C. Ethernet
D. Memory Channel
Answer: B
Question 39.
Which statement is TRUE?
A. Look aside space is too small for optimal performance.
B. Paged Dynamic Memory is badly fragmented.
C. Non paged Dynamic Memory should be increased.
D. Lock Manager Dynamic Memory should be increased.
Answer: C
Question 40.
An application reads large amounts of random data and writes numerous log files.
Which configuration makes the data and log files highly available and optimizes performance?
A. data and log files on RAID 5 array
B. data on a RAID 5 array and the log files on RAID 0+1 array
C. data on a RAID 5 array and the log files on RAID 0 array
D. data and log files on separate RAID 5 arrays
Answer: B
Question 41.
One process on a system runs a compute intensive program, while other processes run interactive programs. The interactive processes are more time critical than the compute intensive program.
Which action maximizes the scheduling of the interactive processes?
A. Lower the priority of the compute intensive process below default.
B. Increase the value of the system parameter QUANTUM.
C. Increase the working set size of the interactive processes.
D. Lower the page file quota for the interactive processes.
Answer: A
Question 42.
The system manager issues the command: $ SET AUDIT/AUDIT/ENABLE=FILE=FAIL=ALL
Where will file access failure audit messages be sent?
A. the audit journal file
B. the operator console
C. the audit journal file and the operator console
D. nowhere, the command syntax is invalid
Answer: A
Question 43.
To satisfy changing business requirements a customer decides to modify his existing AlphaServer GS160 Galaxy system.
As a first step, which masks need to be changed on the GS160 to create two new hard partitions, one with QBB 0 and QBB 2, and the other with QBB 1 and QBB 3?
A. HP_QBBMASK0 = 3 and HP_QBBMASK1 = C
B. HP_QBBMASK0 = 6 and HP_QBBMASK1 = 9
C. HP_QBBMASK0 = 5 and HP_QBBMASK1 = A
D. HP_QBBMASK0 = 7 and HP_QBBMASK1 = 8
Answer: C
Question 44.
A system administrator finds that after a power failure on a cluster node, the time for the cluster state transition is excessive.
What are likely causes? Select TWO.
A. RECNXINTERVAL too high
B. SHADOW_MAX_COPY too high
C. LOCKDIRWT too high
D. SCS routing delays
E. TIMVCFAIL too high
Answer: A, E
Question 45.
Customer Services installed and set up a new disk D123 on an HSJ80.
Which action is necessary to configure this disk?
A. Reboot your system.
B. $ @SYS$SYSTEM: STARTUP CONFIGURE DUA123
C. $ MCR SYSGEN CONFIGURE DUA123
D. Wait some minutes.
Answer: D
|
Question 1.
You work as an administrator at ABC.com. The ABC.com network consists of a single Active Directory domain named ABC.com. ABC.com makes use of System Center Configuration Manager 2007 on their network. ABC.com has recently opened a new satellite office in Miami. You have been tasked with making sure that users in the Miami office are able to install operating systems on their workstations using boot images. You decide to modify the settings of the site system in the Configuration Manager to answer requests for boot images from workstations in the Miami office.
Which of the following actions should you take?
A. You should consider creating a new site system, and installing the PXE Boot Service on a
DHCP server in ABC.com’s environment.
B. You should consider creating a new site system, and granting it the Fallback status point role.
C. You should consider creating a new site system, and installing the State Migration Service on
a DHCP server in ABC.com’s environment.
D. You should consider creating a new site system, and granting it the PXE Service Point role.
Answer: D
Explanation:
Question 2.
You work as a Configuration Manager 2007 administrator at ABC.com. The ABC.com network consists of a single Active Directory domain named ABC.com. You have received instruction from the CIO to prepare for the deployment of new OS to all workstations on the ABC.com network office. You are then informed that for the boot images to perform adequately, it needs added network drivers. You navigate to the properties of the boot image, and choose the Select a Driver option. When you try to add the required drivers, you notice that there aren’t any drivers available.
Which two of the following actions should you take?
A. You should consider importing the relevant drivers into the Drivers node of the Configuration
Manager console.
B. You should consider importing the relevant drivers into the Driver Packages node of the
Configuration Manager console.
C. You should also consider choosing the relevant drivers and adding it in the boot image
properties.
D. You should also consider choosing the relevant package and adding it in the boot image
properties.
Answer: A, C
Explanation:
Question 3.
You work as a Configuration Manager 2007 administrator at ABC.com. The ABC.com network consists of a single Active Directory domain named ABC.com. After configuring Network Access Protection (NAP) on ABC.com’s network, you are instructed to make sure that users on ABC.com’ network are able to access options for remediation in the event of remediation failing. You create a Web site in the restricted network
Which of the following actions should you take?
A. You should consider having a Web site created in the restricted network.
B. You should consider having a Web site created in the public network.
C. You should consider having the Troubleshooting URL setting configured on the network policy
for computers that are not compliant.
D. You should consider having the Troubleshooting URL setting configured on the network policy
for computers that are unidentified.
Answer: A, C
Explanation:
Question 4.
You work as a Configuration Manager 2007 administrator at ABC.com. The ABC.com network consists of a single Active Directory domain named ABC.com. You have been tasked with making sure that all workstations on the ABC.com network can be located by which office they reside in. To achieve this, you plan to insert a custom element in the hardware inventory data.
Which of the following actions should you take?
A. You should insert a NOIDMIF file, which hosts the office location data, on each workstation.
You should then set up the Configuration Manager 2007 to gather NOIDMIF files from
workstations.
B. You should modify the Configuration.mof file. You should then insert a NOIDMIF file, which
hosts the office location data, on each workstation.
C. You should modify the Configuration.mof file. You should then set up the sms_def.mof file.
D. You should set up the sms_def.mof file. You should then set up the Configuration Manager
2007 to gather NOIDMIF files from workstations.
Answer: A
Explanation:
Question 5.
You work as an administrator at ABC.com. The ABC.com network consists of a single Active Directory domain named ABC.com. ABC.com makes use of System Center Configuration Manager 2007 on their network. You have recently deployed a custom application to all workstations on the ABC.com network. You are instructed to view the registry values for the new application for all ABC.com workstations. To achieve this, you have to send a query to Configuration Manager 2007 for the relevant information.
Which of the following actions should you take?
A. You should consider configuring hardware inventory, and setting the SMS_Def.MOF file on
every site to query for the registry values.
B. You should insert a NOIDMIF file on each workstation, and set up the Configuration Manager
2007 to gather NOIDMIF files from workstations.
C. You should consider amending the sitectrl.cto file at the primary site.
D. You should consider amending the sitectrl.cto file at the secondary site.
Answer: A
Explanation:
Question 6.
You work as an administrator at ABC.com. The ABC.com network consists of a single Active Directory domain named ABC.com. ABC.com makes use of System Center Configuration Manager 2007 on their network. All workstations on the ABC.com network have a custom application, named ABCApp, installed. You have been instructed to monitor the amount of software used by ABCApp. Furthermore, you have to make sure that you are able to achieve this even if the name of the ABCApp executable is changed. You need to achieve this with as little administrative effort as possible.
Which of the following actions should you take?
A. You should consider configuring a software metering rule, and specify the new file name every
time that it is changed.
B. You should consider configuring a software metering rule, and specifying the Original file name
for ABCApp.
C. You should consider having a customized report configured on the Reports node.
D. You should add all workstations that run ABCApp to a collection, and then configure a
configuration baseline that is applied to the collection.
Answer: B
Explanation:
Question 7.
You work as an administrator at ABC.com. The ABC.com network consists of a single Active Directory domain named ABC.com. ABC.com makes use of System Center Configuration Manager 2007 on their network. You have been instructed to make sure that a range of inventoried names for an application named TestApp can be viewed as a single display name in a Resource Explorer. To do this, you have to consolidate the different inventoried names for TestApp. You have verified that the Software Inventory client agent has been enabled.
Which of the following actions should you take?
A. You should consider having the SMSCIient.mof file modified.
B. You should consider configuring the properties of the Software Inventory client agent to
assemble several products into one product name.
C. You should consider having the CollectionSettings.mof file modified.
D. You should consider configuring the properties of the Software Inventory client agent to have a
product name for each and every product.
Answer: B
Explanation:
Question 8.
You work as an administrator at ABC.com. The ABC.com network consists of a single Active Directory domain named ABC.com. ABC.com makes use of System Center Configuration Manager 2007 on their network. System Center Configuration Manager 2007 has been configured to run in mixed mode. The site server, named ABC-SS01, in ABC.com’s central site is configured as a device management point. You have recently configured a compulsory task to distribute a software package to portable devices. While performing routine monitoring, you notice the failure of software distribution to portable devices on the LAN. You have to make sure that software can be deployed to portable computers via Configuration Manager 2007. You have confirmed that Internet Information Services (IIS) is running, and that Web Distributed Authoring and Versioning (WebDAV) extensions for IIS has been enabled.
Which combination of the following options would allow you to achieve this? (Choose all that apply.)
A. You should choose the Allow clients to transfer content from this distribution point using BITS,
HTTP, and HTTPS option on the General tab of the ConfigMgr distribution point Properties
Dialog box.
B. You should deselect the Allow clients to transfer content from this distribution point using BITS,
HTTP, and HTTPS option on the General tab of the ConfigMgr distribution point Properties
Dialog box.
C. You should deselect the Allow clients to connect anonymously (Required for mobile device
clients) option on the General tab of the ConfigMgr distribution point Properties dialog box.
D. You should choose the Allow clients to connect anonymously (Required for mobile device
clients) option on the General tab of the ConfigMgr distribution point Properties dialog box.
Answer: A, D
Explanation:
Question 9.
You work as an administrator at ABC.com. The ABC.com network consists of a single Active Directory domain named ABC.com. ABC.com recently introduced System Center Configuration Manager 2007 on their network. You have been asked to make sure that all computers in the ABC.com environment are linked to System Center Configuration Manager 2007. You are at present preparing for the installation of the Configuration Manager client software.
Which of the following actions should you take?
A. You should create a deadline for the installation.
B. You should have the logon script configured to execute the ccmsetup.exe command.
C. You should have the logon script configured to execute the Capinst.exe command.
D. You should have the system health validator (SHV) point enabled.
Answer: A
Explanation:
Question 10.
You work as an administrator at ABC.com. The ABC.com network consists of a single Active Directory domain named ABC.com. ABC.com makes use of System Center Configuration Manager 2007 on their network. The ABC.com network also contains a server, named ABC-SR15, which runs Windows Server Update Services (WSUS) 3.0. ABC.com’s workstations receive software updates from ABC-SR15. You have been instructed to make sure that software update point client installation is adequately configured.
Which of the following actions should you take?
A. You should consider configuring the WSUS server to make use of a proxy server via the
Configuration Manager console. You should also consider importing a Group Policy object
(GPO), configuring it to identify command lines for the installation, and then assign it.
B. You should consider importing a Group Policy object (GPO), configuring it to identify command
lines for the installation, and then assign it. You should also consider configuring the WSUS
server as a ConfigMgr software update point.
C. You should consider specifying the fully qualified domain name (FQDN) for the WSUS server
on a public DNS server. You should also consider configuring the WSUS server as a
ConfigMgr software update point.
D. You should consider configuring the WSUS server to make use of a proxy server via the
Configuration Manager console. You should also consider configuring the WSUS server as a
ConfigMgr software update point.
Answer: B
Explanation:
Copyright © 2004 CertsBraindumps.com Inc. All rights reserved.