|
Question 1.
Refer to the exhibit. Based on this network diagram and output from a show cdp neighbors Cisco IOS command, on which network device is the command being executed?
Exhibit:
A. ITCertKeys2
B. ITCertKeys4
C. ITCertKeys3
D. ITCertKeys1
Answer: A
Question 2.
Which three features are supported by the Cisco 7600 Series router? (Choose three.)
A. high performance, with a 720-Gbps capacity per slot
B. 3-, 6-, 9-, 13-slot chassis
C. IP/MPLS provider edge router
D. all models are NEBS compliant
E. Metro Ethernet connectivity
Answer: A, C, E
Question 3.
An administrator wishes to connect two Cisco Catalyst 3750 Series Switches in a back-to-back configuration. A straight-through Category 5e cable is used.
What is the result of making this connection?
A. The connection will fail because the connection requires a Category 6 or higher cable.
B. The connection will succeed as the switches will automatically adjust to the cable type.
C. The connection will succeed after manually configuring one of the interfaces as a crossover
port.
D. The connection will fail as the TX and RX pins are not properly aligned.
E. The connection will fail; a back-to-back connection requires a crossover cable.
Answer: B
Question 4.
Refer to the exhibit. Which would be a benefit of designing the OSPF network as shown?
Exhibit: *** MISSING ***
A. Routes can be redistributed within the individual areas.
B. The backbone area does not need any internal routers.
C. Route summarization is enabled by default in this type of configuration.
D. Route summarization configuration at the ABRs is greatly simplified.
Answer: D
Question 5.
ITCertKeys, a fast growing company with one central headquarters site and 3 regional offices, is looking for a scalable WAN technology. Current plans include adding an additional 7 regional offices with all sites requiring continuous connectivity. The current HQ router has no free ports.
Which of the following WAN technologies would meet ITCertKeys's requirements?
A. Dedicated PPP/HDLC links
B. Frame Relay
C. ISDN-BRI
D. ADSL
E. Broadband cable service
Answer: D
Question 6.
Which type of network traffic is characterized as smooth, benign, drop-sensitive, and delay-sensitive and is typically UDP based?
A. voice to voice
B. data to data
C. voice to video
D. video to data
Answer: A
Question 7.
In the Cisco Catalyst 6513 Switch, which slots support the Supervisor Engine 720 and Supervisor Engine 32?
A. slots 7 and 8
B. any slot
C. slots 1 and 2
D. slots 5 and 6
E. slots 12 and 13
Answer: A
Question 8.
You are working with a client that has deployed Cisco Works LMS in conjunction with an IP communications solution. The client has a current requirement to track IP communications end stations.
Which Cisco Works LMS component would the client need to use?
A. Cisco Works Resource Manager Essentials
B. Cisco Works Cisco View
C. Cisco Works Device Fault Manager
D. Cisco Works Internet work Performance Monitor
E. Cisco Works Campus Manager
Answer: E
Question 9.
What are three important characteristics of the Cisco Catalyst C3560G-48PS switch?
(Choose three.)
A. contains 48 Ethernet 10/100/1000 ports and 2 dual-purpose slots
B. supports class 2, 802.3af PoE up to a maximum of 24 ports
C. uses the GBIC/SFP form factor for dual-purpose ports
D. supports Layer 3 IP routing services
E. provides a maximum forwarding bandwidth of 32 Gbps
Answer: C, D, E
Question 10.
The Cisco 3200 Series Mobile Access Routers include a rugged zed enclosure and a MARC.
Which three components may be added to the MARC? (Choose three.)
A. FESMICs
B. GESMICs
C. LAMICs
D. VMICs
E. WMICs
F. SMICs
|
Question 1.
HP Systems Insight Manager and HP Storage Essentials provide server and storage management through a central management platform.
Which functions are included? (Select three.)
A. integrated security
B. storage array configuration
C. array discovery and identification
D. access to storage on unmanaged hosts
E. assignment of a new management server
F. speed modification on Fibre Channel connections
Answer: A, B, C
Question 2.
Which activities can be monitored with Storage Essentials? (Select two.)
A. storage growth planning
B. disaster recovery planning
C. storage network traffic sniffing
D. domain user rights identification
E. underutilized storage identification
Answer: A, E
Question 3.
What is a recommended prerequisite for a hardware or software product to become HP Storage Essentials compliant?
A. Fibre Channel support
B. Windows 2000 or 2003 server platform
C. HP Systems Insight Manager compatibility
D. Storage Network Industry Association conformance
Answer: D
Question 4.
Which statement about Storage Essentials Solution Service is correct?
A. The product warranty is extended with Level 3.
B. At least one level must be included in each quote.
C. Storage Essentials is customer installable and all levels are optional.
D. Software installation, configuration and testing are only included in Level 1.
Answer: B
Question 5.
Which HP Storage Essentials features include direct attached storage? (Select two.)
A. schedule of provisioning tasks
B. display of ports in Performance Monitor
C. display of connections in System Manager
D. schedule of port performance data collection
E. display of reachable ports in Path Provisioning
Answer: A, C
Question 6.
What extends HP Systems Insight Manager with additional SAN management and monitoring functionality?
A. entering a new license key
B. installation of SMI-S providers
C. the CIM extension on managed hosts
D. a CIMOM client enabled on the storage system
Answer: B
Question 7.
What are the two components of the connector?
A. SE Database connector which connects both HP SIM and HP Storage Essentials to the
database
B. ODBC connector which connects HP SIM to HP Storage Essentials; HP SIM connector which
connects HP Storage Essentials to HP SIM
C. MySQL connector which connects HP SIM to HP Storage Essentials; HP SIM connector which
connects HP Storage Essentials to HP SIM
D. Storage Essentials connector which connects HP SIM to HP Storage Essentials; HP SIM
connector which connects HP Storage Essentials to HP SIM
Answer: D
Question 8.
Which infrastructure service is required on the central management server host to install Storage Essentials?
A. CIM
B. SNMP
C. CIMOM
D. SMI-S provider
Answer: B
Question 9.
Which security feature protects the intercommunication of HP Systems Insight Manager (SIM), its clients, and its users?
A. Secure Shell based scripting is limited to UNIX platforms.
B. HP-signed Secure Socket Layer certificates ensure authenticity.
C. Secure Task Execution limits access from specific HP SIM servers.
D. Secure Shell known_hosts files contain a list of discovered servers.
Answer: C
Question 10.
What is a characteristic of HP Systems Insight Manager with regard to open system management platform design?
A. It may be extended by using third party plug-ins.
B. It is licensed for exclusive use with HP components.
C. It supports only HP platforms, whereas any platform integrates with HP OpenView.
D. It primarily uses SNMP to contact devices; other connection methods are optional and must be
purchased.
Answer: A
Copyright © 2004 CertsBraindumps.com Inc. All rights reserved.