|
Question 1.
You want to configure Replication Manager/SE to automatically backup an SQL replica as part of the nightly backup job. The backup Administrator has provided you with a script that will backup the mount location that Replication Manager/SE will use.
Which Replication Manager/SE script field do you configure to utilize this script?
A. Pre Replication Script
B. Post Mount Script
C. Backup Script
D. Post Replication Script
Answer: B
Question 2.
ITCertkeys.com asked you to design a new backup solution for its environment. They currently have a single backup server and a tape library connected to the SAN.
Which solution requires the least amount of change and optimizes its current investment?
A. CLARiiON Disk Library
B. CLARiiON CX with ATA disks
C. Celerra NS with ATA disks
D. New Tape Library
Answer: A
Question 3.
As part of a disaster recovery process, what should you do to recover the NetWorker resource database?
A. Recover the bootstrap save set
B. Recover the SYSTEM save set
C. Perform a browsable recovery of the /nsr/res directory
D. Perform a save set recovery of the save set containing the /nsr/res directory
Answer: A
Question 4.
Your task is to develop a backup to disk solution for ITCertkeys.com. After an initial analysis, you decide to include one DL720 to be used as the primary backup device. The customer has been using a physical library with DLT8000 drives for many years and would like to have the capability to recover from the old tapes. The solution must result in the fewest possible changes to the backup server.
How can you best address these requirements?
A. Connect the existing physical library to the back-end of the DL720. Create a virtual library and
virtual tape drives matching the physical drive types.
B. Install the IP Replication agent on the backup server that controls the physical library. Copy all
physical tapes over the network to virtual tapes on the DL720.
C. Have the DL720 and the physical library connected to the SAN, so both will be visible from the
backup software perspective.
D. Create a separate environment in an offsite location to be used for recovery purposes only.
Connect the physical library to this new environment and make all physical tapes available at
the same location.
Answer: A
Question 5.
ITCertkeys.com currently backs up, on average, 600 GB a day Sunday through Friday and 3 TB on Saturday. They would like to keep four weeks of backups on the CLARiiON Disk Library without compression. They expect their disk usage to grow 10% a year.
Which model of CLARiiON Disk Library do you recommend as a solution that will be good for three years?
A. DL210
B. DL720
C. DL520
D. DL740
Answer: B
Question 6.
ITCertkeys.com is using Cloning Offsite Vaulting Strategy. After a first backup is performed, a copy of the data is sent to the vault location.
What happens with the data on the primary site?
A. The data is moved to tape
B. The data is kept in the primary site
C. The data is marked as recyclable
D. No copy is saved in the primary site
Answer: B
Question 7.
A NetWorker server manages three tape drives. Server parallelism is set to 24. All save sets are directed to the Default pool. During a group backup, 16 save sessions are started.
If each device resource has a Target Sessions value of 4, which statement is correct?
A. NetWorker aborts the group because there are not enough sessions available
B. 16 save streams are directed to the tape drives
C. 12 save streams are directed to tape drives and 4 save sets wait until another save session
finishes
D. 12 save streams are directed to tape drives and 4 save sets are aborted
Answer: B
Question 8.
ITCertkeys.com has been using NetWorker in evaluation mode for a week. Their backup devices are disk based. After adding the Network Edition enabler, all backups start to fail.
What is missing?
A. PowerSnap enabler
B. All devices need to be reconfigured
C. The server needs to be rebooted
D. DBO enabler
Answer: D
Question 9.
ITCertkeys.com wants to keep all backups onsite for possible restores. They also need to store all backups at an offsite location.
Which backup strategy best satisfies this requirement?
A. Archive
B. Rotation
C. Mirroring
D. Cloning
Answer: D
Question 10.
ITCertkeys.com currently backs up, on average, 1.5 TB a day Monday through Friday and 7 TB on Saturday. They would like to keep four weeks of backups on the CLARiiON Disk Library. They expect their disk usage to grow 30% a year. They want a solution that will be good for three years.
Which model of CLARiiON Disk Library would you recommend?
A. DL740
B. DL520
C. DL710
D. DL310
Answer: A
Question 11.
How do you configure a Replication Manager job to backup a Clone once it has been fractured from a production volume?
A. Configure Replication Manager to mount the volume and then execute a backup script.
B. In the job Wizard, select the customer's backup product from the drop down list. Next select
the desired save set to run.
C. Create a Backup Job. Associate the Backup job to the Clone job and select the "run at job
completion" check box.
D. Replication Manager does not natively interface with backup software.
Answer: A
Question 12.
What is a requirement for an Auto Archive operation to successfully happen?
A. The physical tape must be bigger than the virtual tape
B. The CLARiiON Disk Library must be running at least version 1.2 of the emulation software
C. The Auto Archive license must be installed
D. Barcodes on the physical library must match the barcodes on the virtual library
Answer: D
Question 13.
In a NetWorker data zone, what determines the maximum number of save sets that may be backed up simultaneously?
A. Target sessions
B. Client parallelism
C. Server parallelism
D. Max parallelism
Answer: C
Question 14.
ITCertkeys.com was running NetWorker Server backups under an evaluation mode license. The live NetWorker license codes have just been entered on the NetWorker Server. ITCertkeys.com can no longer backup to the tape devices even though they have all the necessary license codes entered.
What is the most likely cause of the problem and how can you resolve it.
A. Since live NetWorker licenses were entered, all tape devices need to be re-configured.
B. The tape devices need to be cleaned.
C. You cannot replace an evaluation mode license with live NetWorker licenses. They must de-
install and re-install the NetWorker software.
D. The tape devices became disabled when entering the live license codes and they need to re-
enable the tape devices.
Answer: D
Question 15.
You are proposing a new backup solution for ABC Corporation, using a DL720 as the backup target. Eight ports will be connected to the customers SAN.
How many ports are available to be connected to a back-end physical library?
A. 6
B. 10
C. 8
D. 4
Answer: C
|
Question 1.
Which two statements correctly describe configuring active/active failover? (Choose two.)
A. You must assign contexts to failover groups from the admin context.
B. Both units must be in multiple mode.
C. You must configure two failover groups: group 1 and group 2.
D. You must use a crossover cable to connect the failover links on the two failover peers.
Answer: B, C
Question 2.
Observe the following exhibit carefully. When TCP connections are tunneled over another TCP connection and latency exists between the two endpoints, each TCP session would trigger a retransmission, which can quickly spiral out of control when the latency issues persist. This issue is often called TCP-over-TCP meltdown.
According to the presented Cisco ASDM configuration, which Cisco ASA security appliance configuration will most likely solve this problem?
A. Compression
B. MTU size of 500
C. Keepalive Messages
D. Datagram TLS
Answer: D
Question 3.
The IT department of your company must perform a custom-built TCP application within the clientless SSL VPN portal configured on your Cisco ASA security appliance. The application should be run by users who have either guest or normal user mode privileges.
In order to allow this application to run, how to configure the clientless SSL VPN portal?
A. configure a smart tunnel for the application
B. configure a bookmark for the application
C. configure the plug-in that best fits the application
D. configure port forwarding for the application
Answer: A
Question 4.
According to the following exhibit. When a host on the inside network attempted an HTTP connection to a host at IP address 172.26.10.100, which address pool will be used by the Cisco ASA security appliance for the NAT?
A. 192.168.8.101 - 192.168.8.105
B. 192.168.8.20 - 192.168.8.100
C. 192.168.8.106 - 192.168.8.110
D. 192.168.8.20 - 192.168.8.110
Answer: B
Question 5.
Study the following exhibit carefully. You are asked to configure the Cisco ASA security appliance with a connection profile and group policy for full network access SSL VPNs. During a test of the configuration using the Cisco AnyConnect VPN Client, the connection times out. In the process of troubleshooting, you determine to make configuration changes.
According to the provided Cisco ASDM configuration, which configuration change will you begin with?
A. Require a client certificate on the interface.
B. Enable an SSL VPN client type on the interface.
C. Enable DTLS on the interface.
D. Enable a different access port that doesn't conflict with Cisco ASDM.
Answer: B
Question 6.
You are the network security administrator for the ITCERTKEYS company. You create an FTP inspection policy including the strict option, and it is applied to the outside interface of the corporate adaptive security appliance. How to handle FTP on the security appliance after this policy is applied? (Choose three.)
A. FTP inspection is applied to traffic entering the inside interface.
B. Strict FTP inspection is applied to traffic entering the outside interface.
C. FTP inspection is applied to traffic exiting the inside interface.
D. Strict FTP inspection is applied to traffic exiting the outside interface.
Answer: A, B, D
Question 7.
Which three statements correctly describe protocol inspection on the Cisco ASA adaptive security appliance? (Choose three.)
A. The protocol inspection feature of the security appliance securely opens and closes negotiated
ports and IP addresses for legitimate client-server connections through the security appliance.
B. For the security appliance to inspect packets for signs of malicious application misuse, you
must enable advanced (application layer) protocol inspection.
C. If inspection for a protocol is not enabled, traffic for that protocol may be blocked.
D. If you want to enable inspection globally for a protocol that is not inspected by default or if you
want to globally disable inspection for a protocol, you can edit the default global policy.
Answer: A, C, D
Question 8.
An SSL VPN (Secure Sockets Layer virtual private network) is a form of VPN that can be used with a standard Web browser. After configuring port forwarding for a clientless SSL VPN connection, if port forwarding is to work, which end user privilege level is required at the endpoint?
A. system level
B. guest level
C. user level
D. administrator level
Answer: D
Question 9.
Which two methods can be used to decrease the amount of time it takes for an active Cisco ASA adaptive security appliance to fail over to its standby failover peer in an active/active failover configuration? (Choose two.)
A. decrease the interface failover poll time
B. decrease the unit failover poll time
C. use the special serial failover cable to connect the security appliances
D. use single mode
Answer: A, B
Question 10.
Multimedia applications transmit requests on TCP, get responses on UDP or TCP, use dynamic ports, and use the same port for source and destination, so they can pose challenges to a firewall. Which three items are true about how the Cisco ASA adaptive security appliance handles multimedia applications? (Choose three.)
A. It dynamically opens and closes UDP ports for secure multimedia connections, so you do not
need to open a large range of ports.
B. It supports SIP with NAT but not with PAT.
C. It supports multimedia with or without NAT.
D. It supports RTSP, H.323, Skinny, and CTIQBE.
Answer: A, C, D
Copyright © 2004 CertsBraindumps.com Inc. All rights reserved.