|
Question 1.
A customer calls you and wants to change Governance Edition back to basic.
What is your reply?
A. No problem
B. Need to contact Sales as there are additional charges
C. Need to perform factory re-initialization and all data lost
D. Contact L3 support
Answer: C
Question 2.
A CE is at a customer site and needs to connect to a Gen4 storage node.
How would they unlock the node?
A. Front Panel Display
B. Secure Shell command with "admin" login ID
C. CLI command using "service" login ID
D. CLI command using "admin" login ID
Answer: D
Question 3.
Customer has an existing Dell 2650. They want to setup E
A. What is required?
A. EA is not supported on a Dell 2650
B. Gen3 node
C. Dell 2850
D. Gen4 node
Answer: C
Question 4.
How often must the procedure generator be downloaded?
A. Every 7 days
B. Every 21 days
C. Every 28 days
D. Every 14 days
Answer: D
Question 5.
What is the minimum release of CentraStar which supports storage on access?
A. 3.0
B. 2.4
C. 2.3
D. 2.2
Answer: B
Question 6.
What does this Centera log indicate?
Exhibit:
A. Internal IP address of 172.19.0.0
B. Centera is waiting to be Kickstarted
C. Internal IP address of 10.255.0.0 and is Cube 1
D. Kickstarted and is Cube 2
Answer: C
Question 7.
Which profile(s) can be used to add management profiles and assign roles?
A. Admin
B. Root
C. EMCsecurity
D. EMCservice
Answer: A
Question 8.
Which monitoring tool is available to customers to monitor their Centera over a LAN, even when configured as CE+?
A. CSG Monitor
B. Centera Monitor
C. SNMP
D. Centera Viewer
Answer: B
Question 9.
After upgrade to CentraStar 3.0, which pool will contain all the clips?
A. Default
B. ConsoleArchive
C. AuditArchive
D. Cluster
Answer: A
Question 10.
The customer wants to have a share called BMR. The share will be mapped on a Windows 2000 server.
Under which directory on the CUA would the BMR share be created?
A. /sfs/gateway_cifs
B. /sfs/gateway_nfs
C. /sfs/gateway_http
D. /sfs/gateway_ftp
Answer: A
Question 11.
When will Garbage collection delete a Blob?
A. When the Centera is rebooted
B. When a CDF is deleted
C. When all CDFs pointing to a Blob are removed
D. When the retention period expires on the Blob
Answer: C
Question 12.
Which protocol provides the means for managing local and wide area network devices?
A. UDP
B. SMTP
C. TCP
D. SNMP
Answer: D
Question 13.
An Automatic Transfer Switch (ATS) is installed on a Centera rack.
For which hardware generation(s) is it used?
A. Gen1 and Gen4
B. Gen2 and Gen3
C. Gen4
D. Gen1, Gen2, and Gen3
Answer: B
Question 14.
How does the CE shutdown an entire cluster in preparation for a relocation?
A. Open CV, select node list, choose all the nodes, right mouse click and select shutdown
B. Turn off the main power breakers
C. Use the "Power off" button on each node
D. Open CV, select commands, choose shutdown
Answer: D
Question 15.
What is a function of Centera Monitor?
A. Allows administrators to monitor user access to the Centera through a GUI
B. Allows a customer to configure their CE+ Centera over the LAN
C. Provides the customer access through the report profile to the Centera to generate storage
capacity reports
D. Displays Centera cluster status and statistics through a GUI
Answer: D
Question 16.
Which node is responsible for email home?
A. Node with lowest object count
B. Node with modem attached
C. Cluster Principal
D. Access Principal
Answer: D
Question 17.
Bidirectional replication is available on which replication topology?
A. Chain
B. Ring
C. Pairs
D. Star
Answer: C
Question 18.
The active CUA crashes in an EA environment.
What steps need to be taken to fix the problem?
A. Login into the standby CUA, if active is showing as unreachable, initiate a failover
B. Replace the active CUA then do a restore from Centera using the latest backup address
C. Login to the standby CUA's GUI and perform a restore from the last active backup
D. Powerdown the active CUA, powerup the standby, change the IP and hostname of the standby
CUA to match the active, then remap or mount the shares
Answer: A
Question 19.
Which component of the Global Services Tool Kit can be used to check Centera customer network connectivity after installation is complete?
A. CLI
B. Centera Viewer
C. Centera Verify
D. Centera Monitor
Answer: C
Question 20.
The customer wants the CUA to write to the Centera using a profile.
How can this be accomplished?
A. Create a CUA profile on the Centera, when prompted for the location of the .pea. Input the ip
of an access node and the path /mnt/blobs1/service/cua.pea or /mnt/support1/service if gen4.
on the CUA configuration setup point the authentication to the path of the access node
B. CUA does not support profiles
C. Create a CUA profile on the Centera, when asked for a secret, put in a file pointing to the
storigen_nms, example :/var/usr/storigen_nms
D. Create a CUA profile on the Centera, ftp the .pea file to the CUA, move the .pea file into
PAI_info
Answer: D
|
Question 1.
Consider the following customer attributes and choose the correct IP telephony call processing model:
- a large campus that spans two PSAP areas
- a single group of buildings connected via fiber optics
- data VPNs that support multiple contractors and suppliers
- a fully developed three-tier network hierarchy
- connectivity to two different service providers for Internet access
A. single-site call processing
B. centralized call processing
C. hybrid call processing
D. distributed call processing
Answer: A
Question 2.
What information is relevant to choosing an IP telephony centralized call processing model?
A. multiple PRIs to the PSTN
B. a campus of six buildings connected via an ATM backbone
C. three small regional sales offices located in the three Western time zones
D. centralized order processing, shipping, and billing for all customer products
E. connectivity to a single service provider that hosts the company web site and provides for
Internet access
F. a single six-story building with an IDF on each floor and an MDF in the computer room on the
second floor
Answer: C
Question 3.
In a TDM PBXto Cisco Unified Communications Manager migration, which three things must be verified from the LAN perspective before IP telephony can be deployed? (Choose three.)
A. the type of wiring in the office
B. the number of PSTN connections needed
C. the number of public IP addresses available
D. the amount of rack space in the equipment rack
E. the amount of power that is available to support new LAN switches
Answer: A, D, E
Question 4.
DRAG DROP
The intranet will have three VLAN types to support voice and data traffic; one type for voice, one type for data, and one type for the Cisco Unified Communications Manager cluster. How should inter-VLAN connectivity by deployed? Drag and drop the type of connectivity to each type of connection. Types of connections may be used more than once.
Answer:
Question 5.
Ajax wants to ensure that their employees are safe and that they comply with the law.
What are four general E911 responsibilities of an enterprise telephony system? (Choose four.)
A. Enable PSAP call-back.
B. initiate the update of ALI records.
C. Provide a detailed map of all ERLs.
D. Allow conferencing with internal security personnel.
E. Route calls to the appropriate point (on-net or off-net).
F. Deliver appropriate calling party number digits to LEC
Answer: A, B, E, F
Question 6.
What are two conferencing guidelines for a single-site deployment? (Choose two.)
A. Use hardware conferencing only for small deployments
B. If available, configure DSPs for flex-mode when there are multiple codec types in use.
C. Group any conferencing resources into MRGLs based on their location, to manage Call
Admission Control.
D. Make certain that Meet-Me and Ad-Hoc conference resources each account for a minimum of
5% of the user base.
Answer: B, D
Question 7.
Ajax needs to provide technical support outside of normal operating hours. They would like to deploy a small test call center to develop the skills necessary to provide phone, chat, and e-mail support. Ajax wants to start with five agents.
Which two connection types would be applicable for use with the planned contact center? (Choose two.)
A. PRI
B. CAS DC. ESM
D. QSIG
E. POTS
Answer: A, B
Question 8.
Indicate whether T1s orE1s are available in your area. (Note: If both are available, choose the one with which you are most familiar.)
A. T1
B. E1
Answer: NO CORRECT ANSWER
Question 9.
You have decided to use the MGCP signaling protocol for the PSTN gateway at Ajax.
Which option is true regarding the use of a gatekeeper in their network?
A. One may be used for CAC.
B. One could be used for address resolution.
C. One may be deployed for both CAC and address resolution.
D. A gatekeeper is not applicable in this situation.
Answer: D
Question 10.
Ajax has contacted its LEC to obtain an additional range of DIDs. Their current DID range is 555-6000 through 555-6999. The LEC can provide them with an additional range of numbers, 556-6000 through 556-6999. The LEC is currently sending four digits inbound, so the two DID ranges overlap.
What two things can be done to resolve this solution? (Choose two.)
A. Ask the LEC to send five digits.
B. Change internal calls to five-digit dialing.
C. Move to a six-digit dial plan to provide more dialing granularity for all extension numbers.
D. Contact an alternative carrier to see if it can provide a DID range that does not overlap with the
current range.
Answer: A, B
Copyright © 2004 CertsBraindumps.com Inc. All rights reserved.