|
Question 1.
You are the messaging engineer for your company. The company has 10,000 users worldwide. All users connect to their mailboxes by using Outlook Web Access. The company is transitioning from Microsoft Exchange Server 2003 to Exchange Server 2007. You plan to deploy five Client Access servers. You need to provide recommendations to improve the performance of Outlook Web Access.
What should you do?
A. On all Client Access servers, edit the TMP variable and specify a dedicated physical disk.
B. On all Exchange Server 2003 servers, edit the TMP variable and specify a dedicated physical
disk.
C. Install an Edge Transport server on a new server.
D. Install a Hub Transport server on a new server.
Answer: A
Question 2.
You are the messaging engineer for your company. Your network contains a single Microsoft Exchange Server 2003 server with Service Pack 2 installed.
The Intelligent Message Filter has been enabled on the Exchange Server 2003 server. You plan to transition your messaging environment from Exchange Server 2003 to Exchange Server 2007. You do not plan to deploy an Edge Transport server. You need to ensure that anti-spam filtering is enabled for your organization after the transition to Exchange Server 2007.
What should you do?
A. Configure sender reputation.
B. Run the AntispamCommon.ps1 Exchange Management Shell script.
C. Run the lnstall-AntispamAgents.ps1 Exchange Management Shell script.
D. Configure a transport rule that drops all messages with a spam confidence level of five or
higher.
Answer: C
Question 3.
You are the messaging engineer for your company. Your company has a main office and 30 branch offices. Your company has a Microsoft Exchange Server 2003 messaging system. A routing group is configured for each office. As part of your transition to Exchange Server 2007, you recently deployed Client Access servers. You plan to deploy Hub Transport servers. You need to prepare the Exchange organization for the deployment of the Hub Transport servers.
What should you do?
A. Create new routing groups. Place the Exchange Server 2007 server objects into the new
routing groups.
B. Configure multiple IP addresses on all Exchange Server 2007 servers. Disable Windows
Firewall for all network connections.
C. Create new Active Directory sites. Place the Exchange Server 2003 servers and the Exchange
Server 2007 servers into separate sites.
D. Suppress propagation of link state information on all Exchange Server 2003 servers.
Answer: D
Question 4.
You are the messaging engineer for your company. The company has a main office and two branch offices. The network contains two Exchange servers named Server1 and Server2.
Server1 is a Microsoft Exchange Server 2003 server. Server1 hosts the SMTP connector that delivers outbound Internet e-mail. Server2 is an Exchange Server 2007 server. Server2 hosts the Mailbox server role, the Client Access server role, and the Hub Transport server role. You plan to configure your company's firewall to allow outbound SMTP connections only from Server2. You need to recommend a solution that ensures that Server2 delivers all outbound Internet e-mail.
What should you recommend?
A. Configure the SMTP connector on Server1 to use Server2 as a smart host. Delete the Receive
connector on Server2.
B. Create a Send connector that uses Server2 as a source server. From Server 1, delete the
SMTP connector.
C. Configure the SMTP virtual server on Server1 to use Server2 as a smart host. From Server 1,
delete the SMTP connector.
D. Create a Receive connector on Server2 and specify the Remote IP range to the local subnet.
Create a Send connector that uses Server1 as a smart host.
Answer: B
Question 5.
You are the messaging engineer for your company. The network contains a single Exchange organization that consists of Microsoft Exchange Server 2003 servers and Exchange Server 2007 servers. You need to recommend a solution that allows all Exchange administrators to track messages sent to any mailbox on any server in the organization.
What should you recommend?
A. Use the Exchange Server 2007 Queue Viewer to track e-mail messages.
B. Use the Exchange Server 2007 Mail Flow Troubleshooter tool to track all messages.
C. Use the Exchange Server 2007 Exchange Management Shell to run the Get-Message cmdlet to track a message by specifying the messages unique message ID.
D. Use the Exchange Troubleshooting Assistant to track messages sent by Exchange Server
2007. Use the Message Tracking Center to track messages that are transferred to Exchange
Server 2003.
Answer: D
Question 6.
You are the messaging engineer for your company. The company network contains an Active Directory forest that contains three domains. Each domain contains at least one Microsoft Exchange Server 2003 server. All mail-enabled groups are configured as global distribution groups. You plan to transition from Exchange Server 2003 to Exchange Server 2007. You need to recommend a solution that ensures that all mail-enabled groups can be expanded from any Exchange Server 2003 server or any Exchange Server 2007 server.
What should you recommend?
A. Convert all global distribution groups to global security groups.
B. Convert all global distribution groups to universal distribution groups.
C. Configure all global distribution groups to require that senders are authenticated.
D. Configure all global distribution groups to send delivery reports to the message originator.
Answer: B
Question 7.
You are the messaging engineer for your company. The company has one main office and 100 branch offices. An Active Directory site exists for each office.
The company has a Microsoft Exchange Server 2003 messaging system. Each office contains one Exchange server. A routing group is configured for each office. You plan to transition the company's messaging system to Exchange Server 2007. You need to design a transition plan that allows both versions of Exchange to coexist. Your plan must also minimize the number of servers deployed in your Exchange organization.
What should you recommend?
A. Install an Exchange Server 2007 Mailbox server in all offices. Move all mailboxes and replicate
all public folders from the Exchange Server 2003 server to the new Mailbox server.
Decommission all Exchange Server 2003 servers.
B. Install an Exchange Server 2007 Mailbox server in the main office. Move all mailboxes and
replicate all public folders from the Exchange Server 2003 servers to the new Mailbox server.
Decommission all Exchange Server 2003 servers.
C. Install an Exchange Server 2007 Mailbox server, a Client Access server, and a Hub Transport
server in all offices. Move all mailboxes and replicate all public folders from the Exchange
Server 2003 server to the new Mailbox server. Decommission all Exchange Server 2003
servers.
D. Install an Exchange Server 2007 Mailbox server, a Client Access server, and a Hub Transport
server in the main office. Move all mailboxes and replicate all public folders from the Exchange
Server 2003 server to the new Mailbox server. Decommission all Exchange Server 2003
servers.
Answer: D
Question 8.
You are the messaging engineer for your company. Your company has migrated from Microsoft Exchange 5.5 Server to Microsoft Exchange Server 2003. One Exchange 5.5 Server remains on the network. Your company plans to transition to Exchange Server 2007 and expects a period of coexistence with previous versions of Exchange Server. You need to prepare the Exchange organization for the installation of Exchange Server 2007.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. On a domain controller, run setup.exe /PrepareLegacyExchangePermissions and setup.exe
/PrepareAD from the Exchange Server 2007 source files.
B. On an Exchange Server 2003 server, run setup.exe /roles: Mailbox /LegacyRoutingServer
from the Exchange Server 2007 source files.
C. Decommission the Exchange 5.5 server from the network and remove all Active Directory
connectors. Upgrade the Exchange organization to native mode.
D. On the Exchange 5.5 server1 run the installation program for Exchange Server 2007.
E. Modify the Recipient Update Service for the Exchange organization to point to a server that will
be installed with Exchange Server 2007 server.
Answer: A, C
Question 9.
You are the messaging engineer for your company. The company has a main office and two branch offices. The network contains a single Active Directory domain. An Active Directory site exists for each office. Each site has a Microsoft Exchange Server 2003 server. Each Exchange server hosts the mailboxes and public folders for users in that office. You plan to deploy one Exchange Server 2007 server in each site. Each Exchange Server 2007 server will host the Mailbox server role, the Client Access server role, the Hub Transport server role, and one mailbox database and a public folder database. All users will use Microsoft Office Outlook 2003. You need to recommend a solution that allows Outlook 2003 users to download the offline address book from an Exchange server in their local site.
What should you recommend?
A. For each Exchange Server 2007 server, create replicas of the offline address book public
folders.
B. For each Exchange Server 2007 server, schedule the Update-OfflineAddressBook cmdlet to
run once a day.
C. On each Exchange Server 2007 server, create an offline address book distribution point and
configure Web-based distribution.
D. For each Exchange Server 2007 server, copy the OAB files to a local share. Redirect all client
computers to that share.
Answer: A
Question 10.
You are the messaging engineer for your company. Your company has a Microsoft Exchange Server 2003 messaging system. Your company has an application server named Server1.
Server1 sends SMTP administrative alerts through an unauthenticated relay on an Exchange SMTP virtual server. You plan to deploy Exchange Server 2007 Hub Transport servers. You plan to remove all Exchange Server 2003 servers. You need to ensure that Server1 can send SMTP alerts by using an unauthenticated relay on an Exchange Server 2007 Hub Transport server.
Which two actions should you perform on the Hub Transport servers?
(Each correct answer presents part of the solution. Choose two.)
A. Create a new Receive connector. Configure the Receive connector to use a remote IP address
range that includes the IP address of Server1.
B. Create a new Send connector. Configure an address space that includes only the local SMTP
domain.
C. Create a new Send connector. Configure an * address space.
D. Add the Exchange Users permission group and the Exchange Server authentication
mechanism.
E. Add the Exchange Servers permission group and the Externally Secured authentication
mechanism.
Answer: A, E
Question 11.
You are the messaging engineer for your company. Your network consists of a Microsoft Exchange Server 2003 organization that contains 20 servers. Users connect to their Exchange mailboxes through front-end servers by using Outlook Web Access and Outlook Anywhere. You plan to transition from Exchange Server 2003 to Exchange Server 2007. You need to identify the order in which you will deploy Exchange Server 2007 servers. During the transition, your solution should allow users to access the messages that are stored in their mailboxes.
What should you do?
A. Install the Client Access server role, then the Hub Transport server role, and then the Mailbox
server role. Move all mailboxes to the Mailbox server.
B. Install the Mailbox server role and the Hub Transport server role concurrently. Move all
mailboxes to the Mailbox servers, and then install the Client Access server role.
C. Install the Mailbox server role and the Edge Transport server roles concurrently. Move all
mailboxes to the Mailbox server, and then install the Client Access server role.
D. Install the Edge Transport server role, and then install the Mailbox server role and the Hub
Transport server roles concurrently. Move all mailboxes to the Mailbox server and then install
the Client Access server role.
Answer: A
Question 12.
You are the messaging engineer for your company. Your messaging system has both Microsoft Exchange Server 2003 servers and Exchange Server 2007 servers. You plan to enable message tracking on all Exchange servers. You need to instruct the administrators which tools to use to review the message tracking information.
Which tools should you instruct the administrators to use?
(Each correct answer presents part of the solution. Choose two)
A. The Exchange Server 2003 management tools.
B. The Exchange Server 2007 management tools.
C. The Log Parser Resource Kit tool.
D. The Winroute and MSGanalyzer tools.
Answer: A, B
Question 13.
You are the messaging engineer for your company. Your network includes an Active Directory domain, Microsoft Windows Rights Management Services, and an Enterprise Certificate Authority server. All mailboxes are located on a single Exchange Server 2007 server. All clients use Microsoft Office Outlook 2007. You need to recommend security changes so that e-mail messages that are sent to recipients outside of the company can be signed using S/MIME digital signatures.
What should you recommend?
A. Issue x.509 certificates to all users.
B. Issue x.509 certificates to all client computers.
C. Install the Windows Rights Management client on all client computers.
D. Create a transport rule that appends a disclaimer to all outbound messages and creates a
message header called X- Smime for all outbound messages.
Answer: A
Question 14.
You are the messaging engineer for your company. The company has an Exchange Server 2007 messaging system. The network contains two Exchange Server 2007 servers named Server1 and Server2. Server1 hosts the Mailbox server role, the Hub Transport server role, and the Client Access server role. Server1 is located on the internal network. Server2 hosts the Edge Transport server role. Server2 is located in the perimeter network. Edge synchronization is configured between Server1 and Server2. You need to ensure that Server1 does not receive e-mail messages that are sent to e-mail addresses that do not exist in the organizations address book.
What should you recommend?
A. On Server2, enable sender filtering.
B. On Server2, enable recipient filtering.
C. On Server1, install the anti-spam agents and enable sender filtering.
D. On Server1, install the anti-spam agents and enable recipient filtering.
Answer: B
Question 15.
You are the messaging engineer for your company. Your company has an Exchange Server 2007 messaging system. Your company's network has five Edge Transport servers. The Edge Transport servers handle all e-mail messages sent to and received from the Internet. Your company wants to implement a stricter e-mail security policy. You need to recommend a solution to encrypt all e-mail messages sent to the Internet.
Which solution should you recommend?
A. Create and configure an IPsec policy. Deploy the IPsec policy on all Edge Transport severs.
B. Deploy e-mail certificates to all users. Instruct all users to encrypt e-mail messages with
S/MIME.
C. Configure Domain Security on one Edge Transport sewer. Clone the configuration to all Edge
Transport severs.
D. Enable the Externally Secured authentication mechanism for all Edge Transport servers.
Answer: B
|
Question 1.
What are the results of the command: fw sam [Target IP Address]?
A. Connections to the specified target are blocked without the need to change the Security Policy
B. Connections to and from the specified target are blocked without the need to change the
Security Policy
C. The Security Policy is compiled and installed on the target's embedded VPN/FireWall Modules
D. Connections from the specified target are blocked without the need to change the Security
Policy
Answer: B
Question 2.
The command fw fetch causes the:
A. Security Gateway to retrieve the user database information from the tables on theSmartCenter
Server.
B. SmartCenter Server to retrieve the debug logs of the target Security Gateway
C. Security Gateway to retrieve the compiled policy and inspect code from theSmartCenter
Server and install it to the kernel.
D. SmartCenter Server to retrieve the IP addresses of the target Security Gateway
Answer: C
Question 3.
Which of the following deployment scenarios CANNOT be managed by Check Point QoS?
A. Two lines connected directly to the Gateway through a hub
B. Two lines connected to separate routers, and each router is connected to separate interfaces
on the Gateway
C. One LAN line and one DMZ line connected to separate Gateway interfaces
D. Two lines connected to a single router, and the router is connected directly to the Gateway
Answer: D
Question 4.
Your company's Security Policy forces users to authenticate to the Gateway explicitly, before they can use any services. The Gateway does not allow Telnet service to itself from any location.
How would you set up the authentication method? With a:
A. Session Authentication rule
B. Client Authentication rule using the manual sign-on method, using HTTP on port 900
C. Client Authentication for fully automatic sign on
D. Client Authentication rule, using partially automatic sign on
Answer: B
Question 5.
You must set up SIP with a proxy for your network. IP phones are in the 172.16.100.0 network. The Registrar and Proxy are installed on the host, 172.16.101.100. To allow handover enforcement for outbound calls from SIP-net to the Internet, you have defined the following objects:
Network object: SIP-net: 172.16.100.0/24
SIP-gateway: 172.16.101.100
VoIP Domain object: VoIP_domain_A
End-point domain: SIP-net
VoIP gateway installed at: SIP-gateway host object
How would you configure the rule?
A. VoIP_domain_A / any / sip_any / accept
B. VoIP_Gateway_A / any / sip / accept
C. Unsupported because the SIP Registrar and the SIP Proxy are installed on the same host.
Separate and create two VoIP Domain objects.
D. SIP-net & SIP-gateway / any / sip / accept
Answer: A
Question 6.
A _______ rule is used to prevent all traffic going to the VPN-1 NGX Security Gateway
A. Stealth
B. Cleanup
C. SmartDefense
D. Reject
Answer: A
Question 7.
An advantage of using central vs local licensing is:
A. Only one IP address is used for all licenses.
B. Licenses are automatically attached to their respective Security Gateways.
C. The license must be renewed when changing the IP address of a Security Gateway.
D. A license can be taken from oneSmartCenter Server and given to SmartCenter Server.
Answer: A
Question 8.
Which command allows verification of the Security Policy name and install date on a Security Gateway?
A. fw ver -p
B. fw show policy
C. fw stat -l
D. fw ctl pstat -policy
Answer: C
Question 9.
What command displays the version of an already installed Security Gateway?
A. cpstat -gw
B. fw printver
C. fw ver
D. fw stat
Answer: C
Question 10.
When configuring objects in SmartMap, it is helpful to ____________ the objects so that they are properly defined for use in a policy rule.
A. Save
B. Actualize
C. Physically connect to
D. Expand
Answer: B
Copyright © 2004 CertsBraindumps.com Inc. All rights reserved.