|
Question 51.
You must set 802.1wBridgePriorities for a ProCurve Routing Switch 9300m and a Switch 5300xl.
What is a difference between the Bridge Priority settings on these two models?
A. On the 9300m, the Bridge Priority is set at actual value. The 5300xl uses a multiplier.
B. The 9300m supports 4096 Bridge Priority values. The 5300xl supports 16.
C. On the 5300xl, 0 is the lowest Bridge Priority. On the 9300m, 0 is the normal priority.
D. The 5300xl supports a separate Bridge Priority for each STP instance. On the 9300m, a single
priority is applied to all STP instances.
Answer: A
Question 52.
ITCertKeys.com network includes a ProCurve Routing Switch 9300m and several 5300xl switches. If the 5300s are configured at default, which protocol must be enabled on the 9300m in order for all the switches to participate in a single Spanning Tree domain?
A. IEEE 802.1X
B. IEEE 802.1Q
C. IEEE 802.1s
D. IEEE 802.1w
Answer: D
Question 53.
What is the reason for configuring track ports on the ProCurve Routing Switch 9300m?
A. to force the switch to abandon the Master role for a VRID if a specified link fails
B. to force the switch to issue a RIP advertisement immediately if a specified link fails
C. to force the switch to update the administrative distance for all affected routes if a specified link
fails
D. to force the switch to assume the role of Designated Router if a specified link fails
Answer: A
Question 54.
What industry standard, for default gateway redundancy, is supported by the ProCurve Routing Switch 9300m?
A. HSRP
B. VRRP
C. VRRPE
D. XRRP
Answer: B
Question 55.
You must configure VRRP on two ProCurve 9300m routing switches that are also members of a single-instance Spanning Tree. One of the routing switches is the root bridge in the Spanning Tree. How will the switch's role in the Spanning Tree affect its VRRP configuration?
A. The Spanning Tree root should be Backup for all VRIDs.
B. The Spanning Tree root should be Master for all VRIDs associated with its directly connected
VLANs.
C. The Spanning Tree root should be Backup for all VRIDs associated with VLANs for which it
does not have direct links.
D. The Spanning Tree root must also be Master of all VRIDs.
Answer: D
Question 56.
Two ProCurve 9300m routing switches are configured to share six VRIDs. The switches are also members of a single-instance Spanning Tree.
Why is it necessary to configure the Master of the VRIDs to also be the Spanning Tree root bridge?
A. to ensure Spanning Tree does not block links between hosts and their default gateways
B. to ensure Spanning Tree does not block the link that carries VRRP advertisements
C. to ensure Spanning Tree does not block links between the Master and edge routers
D. to ensure Spanning Tree does not block links that enable hosts to learn the appropriate virtual
IP addresses
Answer: B
Question 57.
How is the virtual IP address of a VRID determined in VRRPE?
A. The virtual IP address is configured by administrators.
B. The virtual IP address is an IP interface on the Owner of each VRID.
C. The virtual IP address is the address of the first interface to come "up" in a VRID.
D. The virtual IP address is negotiated by VRRPE routers.
Answer: A
Question 58.
What is a difference between the Master selection processes in VRRP and VRRPE?
A. In VRRP, the Master is the router with the lowest MAC address. In VRRPE, the Master is the
router with the lowest IP address.
B. In VRRP, the Master is the router configured with the real IP address that will be shared. In
VRRPE, the Master is the router with the highest priority setting.
C. In VRRP, the Master is the router with the highest priority setting. In VRRPE, the Master is the
router with the lowest priority setting.
D. In VRRP, the Master is the first router to come "up" with VRRP enabled. In VRRPE, the Master
is the first router to advertise its configured VRIDs.
Answer: B
Question 59.
Which configuration context must you enter before defining a VRID on the ProCurve Routing Switch 9300m?
A. global
B. VRID
C. interface
D. VLAN
Answer: C
Question 60.
You must install a new ProCurve Routing Switch 9300m at ITCertKeys.com site that uses VRRPE. The new 9300m will share a VRID with another 9300m.
Which configuration parameter determines which router becomes Master of the VRID?
A. MAC address
B. root priority
C. IP address
D. backup priority
Answer: D
Question 61.
A network design calls for two ProCurve 9300m routing switches to provide VRRP services to four VLANs. No other routers will participate in these VRIDs.
How can the designer enable load sharing between the routers?
A. Configure both routers with the same VRRP priority value.
B. Configure each router to be Master for two VRIDs.
C. Configure all links between the routers to carry all VLANs.
D. Configure all VLANs for redundant links to both routers.
Answer: B
Question 62.
On a network that uses VRRPE, which IP address must be configured as the default gateway on supported hosts?
A. redundant IP address
B. backup IP address
C. virtual IP address
D. owner IP address
Answer: C
Question 63.
Which statement describes a rule for the addressing of a loop back interface on a ProCurve Routing Switch 9300m?
A. The IP address for a loop back interface must be 127.0.0.1; the mask can be defined by the
user.
B. The IP address for a loop back interface must be in the same subnet as the 9300m's Default
VLAN.
C. The IP address for a loop back interface must be in a subnet that is not used anywhere else in
the domain.
D. The IP address for a loop back interface must be in the same subnet as the loop back
interfaces on other routers that must communicate with the 9300m.
Answer: C
Question 64.
You have configured a loop back interface on a ProCurve Routing Switch 9300m.
How will this configuration affect the 9300m's route table?
A. The loop back address range will be listed in the route table as a directly connected network.
B. The loop back address range will not be listed in the route table unless it is associated with a
VLAN configured on the switch.
C. The loop back address range will be listed in the route table with a type designation of "L."
D. The loop back address range will not be listed in the route table unless a routing protocol is
enabled in the loop back interface configuration context.
Answer: A
Question 65.
All ports on a ProCurve Routing Switch 9300m are configured with port-based IP interfaces, but no IPX interfaces.
How will the switch handle IPX broadcast traffic originating in the Default VLAN?
A. The switch will drop the broadcast.
B. The switch will flood the broadcast to all ports.
C. The switch will flood the broadcast only to ports associated with virtual interfaces.
D. The switch will flood the broadcast only to ports with addresses in the same range as the
Default VLAN.
Answer: B
Question 66.
Port 3/4 on a ProCurve Routing Switch 9300m is configured with a port-based IP interface.
How will the switch handle a tagged packet arriving through this interface?
A. insert a new VLAN ID and forward.
B. drop the packet
C. flood the packet
D. strip the tag and forward
Answer: D
|
Question 1.
You work as the desktop support technician at ITCertKeys.com. The ITCertKeys.com network consists of a single Active Directory domain named ITCertKeys.com. You have been assigned to the ITCertKeys.com help desk to aid all the ITCertKeys.com users who experience problems with their workstations. There are both desktop and laptop workstations in operation at ITCertKeys.com. Amy Wilson works as the Marketing manager at ITCertKeys.com. You have received instruction from the CIO to verify whether the workstation of Amy Wilson can obtain the
most recent operating system updates.
What should you do?
A. To check whether your operating system can obtain the latest updates you need to run
Microsoft Windows Vista Upgrade Advisor.
B. To check you need to validate your Windows installation from the Microsoft Windows Genuine
Advantage Web page.
C. You have to make sure that your workstation has a Microsoft Windows Experience Index base
score above 3.0.
D. Windows Defender should be configured to detect updates before scanning.
Answer: B
Question 2.
You work as the desktop support technician at ITCertKeys.com. The ITCertKeys.com network consists of a single Active Directory domain named ITCertKeys.com. You have been assigned to the ITCertKeys.com help desk to aid all the ITCertKeys.com users who experience problems with their workstations. The administrator instructs you to execute a clean installation of Microsoft Windows Vista on the first partition. Thereafter, you need to install Microsoft Windows XP Professional on the second partition of the same machine. A senior support technician informs you that he is able to log on to Windows XP Professional. However, he does not have the option to boot to Windows Vista. You need to ensure that you are able to dual boot the computer.
What should you do?
A. To achieve this you should edit the boot.ini file. Then you should the subsequent line:
Multi(0)Disk(O)Rdisk(0)Partition(1)\Microsoft Windows
B. You need to run the bootcfg.exe application with the /fastdetect option in order to dual boot
computer.
C. To ensure that you are able to dual boot the computer you should perform a clean installation
of Windows Vista on the first partition.
D. The msconfig.exe application should be run and the order of the operating systems in the
boot.ini file should be changed.
Answer: C
Question 3.
You work as the desktop support technician at ITCertKeys.com. The ITCertKeys.com network consists of a single Active Directory domain named ITCertKeys.com. You have been assigned to the ITCertKeys.com help desk to aid all the ITCertKeys.com users who experience trouble with their computers. A ITCertKeys.com employee named Andy Booth works as the accountant in the Finance department. Andy Booth uses a client computer named ITCertKeys-WS621. ITCertKeys-WS621 has the following hardware configuration:
1. 512 MB of RAM
2. 10-GB hard disk
3. 933-MHz processor
4. 64-MB video adapter.
You have received instruction from the CIO to install Microsoft Windows Vista on ITCertKeys-WS621. The CIO also requests that you determine which hardware component fails to meet the minimum hardware requirements.
Identify the hardware component you should choose?
A. The processor will fail to meet the minimum hardware requirements.
B. You should choose the hard disk since it will fail to meet the minimum hardware requirements.
C. The video adapter will fail to meet the minimum hardware requirements.
D. You need to choose the memory since it will fail to meet the minimum hardware requirements
Answer: B
Question 4.
You work as the desktop support technician at ITCertKeys.com. The ITCertKeys.com network consists of a single Active Directory domain named ITCertKeys.com. You have been assigned to the ITCertKeys.com help desk to aid all the ITCertKeys.com users who experience problems with their workstations. ITCertKeys-WS622 is configured to run Microsoft Windows XP Professional. ITCertKeys-WS622 also runs 20 third-party applications. You receive a memo from management informing you of their plans to upgrade ITCertKeys-WS622 to Microsoft Windows Vista. The functionality of the existing 20 applications must be maintained after you upgrade your computer. The administrator asks you to determine whether the hardware and software on ITCertKeys-WS622 will support the upgrade.
What should you do?
A. You need to run the Microsoft Windows Vista Upgrade Advisor application in order to check
whether the hardware and software will support the upgrade.
B. To check whether the hardware and software will support the upgrade you need to run the
mbsacli.exe command.
C. The Microsoft Windows XP Professional system hardware needs to be compared to the
Microsoft Windows Vista Hardware Compatibility List (HCL).
D. To check if the hardware and software will support the upgrade you need to run the
winnt32.exe /checkupgradeonly command.
Answer: A
Question 5.
You work as the desktop support technician at ITCertKeys.com. The ITCertKeys.com network consists of a single Active Directory domain named ITCertKeys.com. The ITCertKeys.com network contains two workstations named ITCertKeys-WS620 and ITCertKeys-WS622. ITCertKeys-WS620 is configured to run Microsoft Windows XP Media Center Edition. ITCertKeys-WS622 is joined to a domain and is configured to run Microsoft Windows XP Professional. You have received instruction from the CIO to upgrade both computers to Microsoft Windows Vista. You need to accomplish this goal while keeping the existing information, functionality and applications.
What actions should you perform? (Choose all that apply)
A. To achieve this goal you need to upgrade ITCertKeys-WS622 to Microsoft Windows Vista
Business Edition.
B. This goal can be accomplished if you upgrade ITCertKeys-WS620 to Microsoft Windows Vista
Business Edition.
C. In order to keep the existing data, functionality and applications you should upgrade
ITCertKeys-WS622 to Microsoft Windows Vista Home Premium Edition.
D. In order to keep the existing data, functionality and applications ITCertKeys-WS620 should be
upgraded to Microsoft Windows Vista Home Premium Edition.
Answer: A, D
Question 6.
You work as the desktop support technician at ITCertKeys.com. The ITCertKeys.com network consists of a single Active Directory domain named ITCertKeys.com. The workstations on the ITCertKeys.com network are all configured to run Windows XP. You receive a memo to upgrade the workstations to Windows Vista. You make use of Windows Update Agent to download the new updates. You notice that the update files are corrupted. You receive instruction from the CIO to force Windows Update Agent to download the entire update again.
What actions should you take?
A. The first step should be to stop the Windows Update service and rename the C:\Program
Files\WindowsUpdate folder. Thereafter you can restart the Windows Update service.
B. To accomplish this you should run the wuauclt.exe /detectnow command.
C. To download the entire update again you should stop the Windows Update service. You then
rename the %systemroot%\SoftwareDistribution folder. Thereafter you can restart the Windows
Update service.
D. To download the entire update again you run the wuauclt.exe /resetauthorization /detectnow
command.
Answer: C
Question 7.
You work as the desktop support technician at ITCertKeys.com. The ITCertKeys.com network consists of a single Active Directory domain named ITCertKeys.com. You have received instruction from the CIO to deploy Windows Vista on a computer by making use of a DVD. The DVD contains Windows Preinstallation Environment (WinPE) stored in winpe.wim, Imagex.exe. The DVD also contains a custom Windows Vista image stored in vista.wim. You need to apply the custom Windows Vista image to the computer.
Identify the command you should use?
A. You should make use of the imagex /append c: D:\vista.wim "Drive D" command.
B. You should make use of the imagex /apply D:\vista.wim 1 C:\ command
C. You should make use of the imagex /export D:\winpe.wim 1 C:\vista.wim "Image" command.
D. You should make use of the imagex /apply D:\winpe.wim 1 C:\ command.
Answer: B
Question 8.
You work as the desktop support technician at ITCertKeys.com. The ITCertKeys.com network consists of a single Active Directory domain named ITCertKeys.com. Your duties include administering the ITCertKeys.com network. The client computers of ITCertKeys.com are all configured to run Microsoft Windows Vista. A ITCertKeys.com employee named Andy Reid reports that he is unable to install an application. You have received instruction from the CIO to install the application.
What should you do?
A. To be able to install the application you need to copy the contents of the CD-ROM to the local
hard disk. Thereafter you will be able to run the application installation from the local hard disk.
B. While Andy Reid is logged on you need to click Continue and install the application at the
consent prompt.
C. While Andy Reid is logged on at the credential prompt you have to provide him with
administrative credentials.
D. A .pwl file should be created that will store administrative credentials. Thereafter you can
double-click the installation file.
Answer: C
Question 9.
You work as the desktop support technician at ITCertKeys.com. The ITCertKeys.com network consists of a single Active Directory domain named ITCertKeys.com. You have been assigned to the ITCertKeys.com help desk to aid all the ITCertKeys.com users who experience problems with their workstations. The workstations of ITCertKeys.com are all configured to run Windows Vista. A ITCertKeys.com user named Andy Booth contacted the Help desk to report some problems that prevent him from carrying out his duties. He informs you that an error message is received when he attempts to start Windows. You discover that his workstation automatically downloads and installs a critical patch for the vulnerability in a system DLL file. You have received instruction from the CIO to restore the workstation of Andy Booth to a bootable state without installing the earlier update files. You need to accomplish this by using the least amount of administrative effort.
How can you restore the workstation to a bootable state?
A. The first step will be to execute a system restore from the Windows Vista installation DVD.
B. You have to access the recovery console. Thereafter you should run fixmbr c:
C. This can be accomplished by accessing the recovery console from the Windows Vista
installation DVD and extracting the original system DLL file. Thereafter you can overwrite the
faulty file.
D. You should restart the workstation in safe mode. Thereafter you can restore the original
system DLL file.
Answer: A
Question 10.
You work as the desktop support technician at ITCertKeys.com. The ITCertKeys.com network consists of a single Active Directory domain named ITCertKeys.com. All the computers on the ITCertKeys.com network are configured to run Windows XP. These computers are all upgraded to Windows Vista. New updates are downloaded by making use of the Windows Update Agent. You discover that the update files are corrupted. You have received instruction from the CIO to force Windows Update Agent to download the entire update again.
What should you do?
A. You need to run the wuauclt.exe /resetauthorization /detectnow command.
B. The wuauclt.exe /detectnow command should be run to accomplish this.
C. You need to stop the Windows Update service and rename the
%systemroot%\SoftwareDistribution folder. Thereafter you need to restart the Windows Update
service.
D. The Windows Update service should be stopped. Then you rename the C:\Program
Files\WindowsUpdate folder. Thereafter you restart the Windows Update service.
Answer: C
Question 11.
You work as the desktop support technician at ITCertKeys.com. The ITCertKeys.com network consists of a single Active Directory domain named ITCertKeys.com. Your duties include administering the ITCertKeys.com network. The ITCertKeys.com help desk requested that you help them address the problems that the users are reporting to them. All the user workstations on the ITCertKeys.com network are configured to run Microsoft Windows Vista. A ITCertKeys.com user named Amy Walsh contacted the Help desk to report some problems that prevent her from carrying out her duties. Amy Walsh informs you that she is unable to install an application. You have received instruction from the CIO to install the application.
What should you do?
A. To accomplish this you need to create a .pwl file that holds administrative credentials.
Thereafter you double-click the installation file.
B. The contents of the CD-ROM should be copied to the local hard disk. Then you will be able to
run the application installation from the local hard disk.
C. To install the application you need to click Continue and install the application while the
standard user is logged on, at the consent prompt.
D. To install the application you need to provide administrative credentials while the standard
user is logged on, at the credential prompt.
Answer: D
Copyright © 2004 CertsBraindumps.com Inc. All rights reserved.