|
Question 1.
Which three numbers are valid volume definitions with an XP array? (Select three.)
A. FF:02
B. 00:00
C. 00:01
D. 06:0C
E. 64:0C
Answer: B, C, D
Question 2.
Which XP array component transfers data between disk drives and cache memory?
A. Shared Memory PCB
B. Service Processor (SVP)
C. Array Control Processor (ACP)
D. Client Host Interface Processor (CHIP)
Answer: C
Question 3.
Which component is found in the DKU cabinet?
A. CM
B. ACP
C. HDD
D. CHIP
Answer: C
Question 4.
In order to achieve maximum cache bandwidth in an XP12000, what combination of components is required?
A. Base Cache Platform + Base Cache Switch
B. Base Cache Platform + Optional Cache Switch
C. Optional Cache Platform + Base Cache Switch
D. Optional Cache Platform + Optional Cache Switch
Answer: D
Question 5.
Company.com requires 24x7x365 uptime.
Which statement describes upgrading the XP12000 microcode without losing host connectivity or I/O?
A. Dual paths to the XP are necessary.
B. This cannot be done. The host(s) must go offline.
C. Auto Path or Secure Path failover software must be used.
D. The CHIP ports will be offline for a short duration that there will be no SCSI timeouts.
E. Each CHIP port has a backup processor allowing single path online microcode upgrade.
Answer: E
Question 6.
Which configuration change requires a port to temporarily go offline?
A. assigning LUN 0
B. creating a new host group
C. changing the port topology
D. changing a LUN to a command device
Answer: C
Question 7.
Which two statements are true about host groups? (Select two.)
A. There can be more than one host type in a host group.
B. Multiple ports cannot be placed into a single host group.
C. The same WWNs can be listed in multiple host groups.
D. Once a LUN number is used in a host group, it cannot be used in another host group.
Answer: B, C
Question 8.
Where does the HP Storage Works Command View XP Advanced Edition management server
store configuration and statistics information?
A. out on the individual host agents
B. in shared memory of the XP array
C. on the SVPs of each array subsystem
D. in local database part of the management server
Answer: D
Question 9.
Company.com has a heterogeneous environment consisting of AIX and Solaris servers.
Which two software products could be used to implement an extended application failover solution? (Select two.)
A. Metro Cluster
B. Service Guard
C. Cluster Extension XP
D. Continuous Access XP
E. LUN Security XP Extension
Answer: C, D
Question 10.
Which statement is true about Performance Advisor XP?
A. It automatically tunes performance over a 24 hour period of time.
B. It has the ability to set and relax host priorities by performance policies.
C. It allows for intelligent allocations of array resources for service-level oriented deployment.
D. It collects data on a real-time basis, and displays current performance patterns.
Answer: D
Question 11.
What is the number of FC CHIP ports that are provided on a base XP10000 configuration?
A. 0
B. 8
C. 16
D. 32
Answer: B
Question 12.
Which statement is true about LUSE?
A. A LUSE volume cannot be extended online.
B. Existing LUSE volume cannot be expanded.
C. A path defined LDEV cannot be added to the LUSE.
D. A LUSE volume can be decreased in size without losing data.
Answer: C
Question 13.
An additional spare disk is recommended for which RAID level?
A. 2D + 2D
B. 3D + 3P
C. 4D + 4P
D. 7D + 1P
Answer: D
Question 14.
Which three statements about OPEN-V volumes are true? (Select three.)
A. OPEN-V volumes with different sizes can be created in one and the same parity group.
B. Space freed by deleting OPEN-V volumes can be re-used for the creation of new OPEN-V
volumes.
C. Single OPEN-Vs can be deleted from a parity group without affecting other OPEN-Vs in the
same parity group.
D. The make Volume function is used to create additional OPEN-V volumes without affecting
other OPEN-Vs in the same parity group.
Answer: A, B, C
Question 15.
Which three features are offered through HP Storage Works Command View XP Advanced Edition that are not available with Remote Web Console XP? (Select three.)
A. reporting
B. cache partitioning
C. SNMP trap forwarding
D. automation of BC/CA HORCM file creation
E. integration with Storage Essentials plug-ins
Answer: A, D, E
Question 16.
What is an important design consideration when configuring an XP array?
A. Inadequate cache causes poor random performance.
B. Inadequate number of CHIP ports can cause poor sequential performance.
C. Inadequate SCSI queues on the server can cause poor overall performance.
D. Inadequate number of array groups can cause poor performance, regardless of cache size.
Answer: D
Question 17.
Which two business benefits does HP Storage Works External Storage XP provide? (Select two.)
A. simplified management for all storage arrays
B. increased availability to external storage arrays
C. investment protection for external storage arrays
D. improved performance on external storage arrays
Answer: A, C
Question 18.
Company.com has an XP12000 with a single ACP pair and the R1 DKU. The customer decides to add the R2 DKU. Which three statements are true about the ACP pairs controlling the DKUs?
(Select three.)
A. An additional ACP pair must be added to add the R2 DKU.
B. It is not necessary to add an additional ACP pair to add the R2 DKU.
C. The customer can utilize up to three additional ACP pairs in this configuration.
D. Adding an additional ACP pair can increase back end performance to the DKUs.
E. Adding an additional ACP pair increases the number of HDDs that can be added to the DKUs.
Answer: B, D, E
Question 19.
Which three methods can be used to create OPEN-Vs? (Select three.)
A. by specifying the volume size
B. by specifying the number of volumes
C. by specifying volume size and number of volumes
D. by specifying the volume size and emulation mode
E. by specifying the emulation mode and number of volumes
Answer: A, B, C
Question 20.
Which three statements are true about the XP10000/12000 cache? (Select three.)
A. It supports duplexed reads.
B. It supports duplexed writes.
C. It is divided across two power domains.
D. It is used for ACP control and command.
E. It is a temporary storage area for data from the host prior to being written to disk.
Answer: B, C, E
|
Question 1. Which of the following types of software protection will help mitigate any threats coming from worm and Trojans? A. Spam Blocker B. Antivirus C. Anti Spyware D. Anti Adware Answer: B Explanation: Question 2. An end user is having problems printing from an application. The technician attempts to send a test page to printer. Which of the following BEST explains the reason the technician used a test page to trouble shoot the issue? A. It clears the print queue and resets the printer memory. B. It allows the technician to see the quality of the printer output. C. The output of the test page allows the technician to initiate diagnostic routines on the printer. D. It verifies connectivity and eliminates possible application problems. Answer: D Explanation: Question 3. Which of the following protocols is used to retrieve email? A. SFTP B. FTP C. SMTP D. POP3 Answer: D Explanation: Question 4. On Windows 7, which of the following paths allows a user to configure a fingerprint reader? A. Start > Settings > Device Manager > Biometric Devices B. Start > Computer > Devices > Biometric Devices C. Start > Settings > Control Panel > Biometric Devices D. Start > Programs > System Settings > Biometric Devices Answer: C Explanation: Question 5. A computer in a warehouse experiences hardware faults and often requires replacement of power supplies, CPUs and CD ROM drives. Which of the following tools will help prevent the hardware faults? A. Anti-static wrist straps B. Compressed air C. Anti-static wipes D. Operating system rescue disk Answer: B Explanation: Question 6. Which of the following is the MOST effective means for a technician to prevent ESD damage when installing RAM? A. Touching grounded metal before contacting components B. Ensuring the AC plug has a ground post C. Wearing a grounded wristband D. Wearing rubber-soled shoes Answer: C Explanation: Question 7. Which of the following processor types is manufactured by AMD? A. Celeron B. Athlon C. Pentium D. Core 2 Quad Answer: B Explanation: Question 8. A laptop with an external USB hard drive and an external monitor is not booting from the internal hardware drive. Power has been verified and the battery is fully charged. But the laptop appears to be stopping after POST. Which of the following will help troubleshoot the cause of problem? A. Format the external USB hare drive. B. Turn off the external monitor C. Disconnect the external monitor D. Remove and reset the laptop battery Answer: C Explanation: Question 9. A technician has completed upgrading a computer from Windows Vista to Windows 7. According to the system and video drivers need to be upgraded. Which of the following is BEST source for theses drivers? A. The Microsoft Windows 7 website B. The manufacturer’s website C. The windows Hardware Compatibility List D. The drivers that came in the original Windows Vista Installation CD Answer: C Explanation: Question 10. A user made a change to their windows XP system that caused problems. The technician wants to restore the system on previous state. The technician cannot find the previous restore point. Which of the following is problem? A. The technician is not in administrator mode. B. System restore is turned off. C. System 32 folder has been removed. D. System restore is not supported on the OS version. Answer: B Explanation:
Copyright © 2004 CertsBraindumps.com Inc. All rights reserved.