Question 1.
You work as a Network Administrator at ABC.com. The network consists of a single Active Directory Domain Services (AD DS) domain. All servers run Windows Server 2008 R2 and all client computers Windows 7 Professional. The company network consists of an internal LAN and a perimeter network. The two networks are separated by an internal corporate firewall. An external corporate firewall connects the perimeter network to the Internet. The network includes virtual machines (VMs) running on host servers contained in both the internal network and the perimeter network. You have recently installed a server named ABC-VMM1 on the internal network. ABC-VMM1 runs Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 and will be used to manage the virtual environment. You are now in the process of deploying VMM agents on the host servers. You have configured the port number for the VMM agents and configured the internal corporate firewall to allow communications on the appropriate port number.

What else do you need to configure to ensure that the VMM agents can communicate with ABCVMM1?

A. You need to configure the name of the VMM server (ABC-VMM1).
B. You need to configure the Fully Qualified Domain Name (FQDN) of a domain controller.
C. You need to configure the name of a SQL Server.
D. You need to configure an encryption key.

Answer: D

Explanation:

Question 2.
You work as a Network Administrator at ABC.com. The network consists of a single Active Directory Domain Services (AD DS) domain. All servers run Windows Server 2008 R2 and all client computers Windows 7 Professional. The company network consists of two subnets. The Development subnet is used by the Development department. The Production subnet is used by all other company departments. You install a Windows Server 2008 R2 Hyper-V server named ABC-VMHost1 in the Production subnet. ABC-VMHost1 contains two network interface cards named NIC1 and NIC2. You have configured NIC1 as a management interface. You want to configure ABC-VMHost1 to host virtual machines on both the Production subnet and the Development subnet.

How should you configure ABC-VMHost1?

A. You should use VLAN tags for the VMs and configure NIC2 to use Trunk Mode.
B. You should assign NIC2 as an additional management interface.
C. You should configure both adapters to support jumbo frames.
D. You should configure NIC1 with an IP address in the Production subnet and configure NIC2 
    with an IP address in the Development subnet.

Answer: A

Explanation:

Question 3.
You work as a Network Administrator at ABC.com. The network consists of a single Active Directory Domain Services (AD DS) domain. All servers in the network run Windows Server 2008 R2. A server named ABC-VMM1 runs Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 and is used to manage the company’s virtual environment. The company includes a Development department. Users in the Development department use their computers to develop and test software applications for use by other company departments and customers. You install a Windows Server 2008 R2 Hyper-V server named ABC-VMTest1 in the Development department. ABC-VMTest1 will host virtual machines (VMs) for the Development department users to use to test their applications. You need to ensure that the VMs are completely isolated from production servers. 

How can you ensure that the test VMs can communicate with each other while being isolated from the host server and the rest of the network?

A. By configuring the VMs to connect to a Dedicated virtual network.
B. By configuring the VMs to connect to an Internal virtual network.
C. By configuring the VMs to connect to a Local virtual network.
D. By configuring the VMs to connect to a Private virtual network.

Answer: D

Explanation:

Question 4.
You work as a Network Administrator at ABC.com. The network consists of a single Active Directory Domain Services (AD DS) domain. You are configuring a virtual environment for the company. You have an iSCSI storage disk array that will be used to store virtual machines (VMs). You install a server named ABC-Host1 that runs a Server Core Installation of Windows Server 2008 R2. You need to configure ABC-Host1 to store to VMs on the iSCSI disk array.

Which two of the following tools could you use?

A. You could use Disk Management.
B. You could use Diskpart.exe.
C. You could use iSCSICLI.exe.
D. You could use iSCSICPL.exe.

Answer: C, D

Explanation:

Question 5.
You work as a Network Administrator at ABC.com. The network consists of a single Active Directory Domain Services (AD DS) domain named ABC.com. The company network consists of an internal LAN and a perimeter network. To comply with company security policy, servers located in the perimeter network are not members of the ABC.com domain. A Microsoft Hyper-V Server 2008 R2 server named ABC-VMHost1 is located in the perimeter network. You relocate ABC-VMHost1 into the internal network. You now need to join ABC-VMHost1 to the ABC.com AD DS domain.

How should you join ABC-VMHost1 to the ABC.com domain?

A. You should use the System Properties control panel applet.
B. You should use the Netsh command line utility.
C. You should use the Hyper-V configuration utility (hvconfig).
D. You should use the dcpromo utility.

Answer: D

Explanation:

Question 6.
You work as a Network Administrator at ABC.com. The network consists of a single Active Directory Domain Services (AD DS) domain named ABC.com. You have installed a Server Core Installation of Windows Server 2008 R2 on a server named ABC-SRV1. You use a Windows 7 Professional client computer named ABC-Admin1. You want to be able to manage the storage on ABC-SRV1 using the Disk Management tool on ABC-Admin1. You need to configure the firewall on ABC-SRV1 by creating a rule group using the Netsh advfirewall command.

Which rule group should you create to enable you to remotely manage the storage on ABCSRV1?

A. You should create a “Remote Administration” rule group.
B. You should create a “Remote Desktop” rule group.
C. You should create a “Remote Volume Management” rule group.
D. You should create a “Remote Access” rule group.

Answer: C

Explanation:

Question 7.
You work as a Network Administrator at ABC.com. The network consists of a single Active Directory Domain Services (AD DS) domain named ABC.com. You are installing a new virtual environment based on Microsoft Hyper-V. You have installed a Server Core Installation of Windows Server 2008 R2 on a server named ABC-VMHost1.

How would you add the Hyper-V role to ABC-VMHost1?

A. By running the Add Roles Wizard in Server Manager.
B. By running the start /w hvconfig command.
C. By running the start /w ocsetup Microsoft-Hyper-V.
D. By running the start-service Hyper-V command.

Answer: C

Explanation:

Question 8.
You work as a Network Administrator at ABC.com. The network consists of a single Active Directory Domain Services (AD DS) domain named ABC.com. All servers run Windows Server 2008 R2 and all client computers Windows 7 Professional. You are installing a large virtual environment for the company. A server named ABC-VMM1 runs Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 and will be used to manage the entire virtual environment. You have installed a Server Core Installation of Windows Server 2008 R2 Datacenter edition on 50 new servers.

What is the easiest way to install the Hyper-V role on the 50 new servers?

A. By running the Add Hosts Wizard on ABC-VMM1 and selecting a new server to add to VMM.  
    Repeat the process for each new server.
B. By running the start /w ocsetup Microsoft-Hyper-V command on each new server.
C. By running the Add Hosts Wizard on ABC-VMM1 and selecting all 50 servers to add to VMM.
D. By running the ocsetup MultiPathIo command on ABC-VMM1.

Answer: C

Explanation:

Question 9.
You work as a Network Administrator at ABC.com. The network consists of a single Active Directory Domain Services (AD DS) domain. You are configuring a virtual environment for the company. You have an iSCSI storage disk array that will be used to store virtual machines (VMs). You install a server named ABC-Host1 that runs a Server Core Installation of Windows Server 2008 R2 then install PowerShell 2.0 and the Hyper-V role. You need to start the Microsoft iSCSI Initiator Service on ABC-Host1 to enable the server to connect to the iSCSI storage disk array.

How should you start the Microsoft iSCSI Initiator Service on ABC-Host1?

A. You should run the start /w ocsetup msiscsi command.
B. You should launch PowerShell and run the start-service msiscsi cmdlet.
C. You should launch PowerShell and run the set-service msiscsi CstartupType auto cmdlet.
D. You should run the net start msiscsi command.

Answer: B

Explanation:

Question 10.
You work as a Network Administrator at ABC.com. The network consists of a single Active Directory Domain Services (AD DS) domain named ABC.com. All servers run Windows Server 2008 R2 and all client computers Windows 7 Professional. The network includes virtual machines (VMs) running on VMware host servers and Hyper-V host servers. A server named ABC-VMM1 runs Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 and is used to manage the entire virtual environment.

Which virtual disk file system is supported by VMM when performing virtual-to-virtual (V2V) conversions of VMware virtual machines?

A. VHDVVI
B. VMFS
C. NFS
D. vmfsRawOutput

Answer: B

Explanation:

Question 11.
You work as a Network Administrator at ABC.com. The network consists of a single Active Directory Domain Services (AD DS) domain named ABC.com. All servers run Windows Server 2008 R2. The network includes virtual machines (VMs) running on VMware host servers and Hyper-V host servers. A server named ABC-VMM1 runs Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 and is used to manage the entire virtual environment. You plan to perform a virtual-to-virtual (V2V) conversion on ABC-VMM1. You configure the disk I/O with a resource importance setting of Very Important.

What else should you do to ensure that the VM is placed on the host server with the most available disk I/O?

A. You should install Virtual Machine Additions on the VM.
B. You should set Resource to minimize.
C. You should set the placement goal to Load balancing.
D. You should configure a hardware profile for the VM.

Answer: C

Explanation:

	Web www.certsbraindumps.com