|
Question 1.
Which one of the following combinations of network configurations would require multiple locations to properly configure?
A. DHCP IP address with built-in Ethernet and DHCP IP Address with Airport
B. PPP dialup IP address with modem and fixed IP address with built-in Ethernet
C. Fixed IP address with built-in Ethernet and DHCP IP address with built-in Ethernet
D. PPP dialup IP address with modem and DHCP IP address with AirPort
Answer: C
Question 2.
How can a user delete a file named "junk document" from all previous backups?
A. Select the "Delete all Backups of junk document" from the action menu in the Time Machine
Finder window
B. Open Time Machine preferences and remove the file "junk document" from the backup list
C. Select the "Delete all Backups of junk document" from the file menu in any standard finder
window
D. Delete "junk document" in the Time Machine finder window for the most recent backup
Answer: A
Question 3.
Which of the following is the best way to check for basic network connectivity from a known-good mac OS X operating system?
A. Perform an archive and install, then use Network Utility
B. Use Network Utility while started from any Mac OS X System
C. Startup from the Mac OS X install disc, then use Network Utility
D. Perform an erase and install then use Network Utility
Answer: C
Question 4.
Which two of the following Macintosh Computers DO NOT support Leopard? SELECT TWO
A. Power Mac G5
B. Power Mac G4 Cube
C. iBook G3
D. Mac Pro
E. PowerBook G4 (12-inch)
Answer: B, C
Question 5.
Which of the following should you always run after an archive and install of Leopard?
A. Migration Assistant
B. Network Assistant
C. Software Update
D. System Profiler
Answer: C
Question 6.
Which of the following is a good technique to use to verify if a Leopard software issue is specific to a single user?
A. Create and log in as a new user
B. Restart in Single User mod
C. Allow the user to administer the computer
D. Delete and re-create all users
Answer: A
Question 7.
Which one of the following combinations of network configurations would require multiple locations to properly configure?
A. DHCP IP address with built-in Ethernet and DHCP IP Address with Airport
B. PPP dialup IP address with modem and DHCP IP address with AirPort
C. Fixed IP address with built-in Ethernet and DHCP IP address with built-in Ethernet
D. PPP dialup IP address with modem and fixed IP address with built-in Ethernet
Answer: C
Question 8.
Which application provides the most detail about system processes in Mac OS X V10.5?
A. System Profiler
B. Activity Monitor
C. CPU Monitor Expanded Window
D. Process Manager
Answer: B
Question 9.
Which TWO of the following are supported ways of restoring a file or folder from a Time Machine backup in Leopard? SELECT TWO
A. Manual restore through finder
B. Time Machine Restore Utility in the Utilities folder
C. Restore from the Time Machine Interface
D. Use the Restore tab in the Time Machine System preference pane
Answer: A, C
Question 10.
Examine the exhibit: What does this symbol mean when starting Leopard?
Exhibit:
A. The Mac can't identify one or more files on the hard disk
B. The Mac can't identify one or more folders on the hard disk
C. The Mac is unable to find a startup disk that contains boot files
D. The Mac is unable to find the Classic environment
Answer: C
|
Question 1.
For disaster recovery, many customers require that data be replicated to remote sites.
What is an advantage in terms of backup operations?
A. There is no need to transport tapes between sites.
B. The production site only needs to perform a point-in-time copy.
C. Data corruption from the primary site cannot be replicated to the secondary site.
D. Backup jobs can be run at the secondary site on the replicated data to avoid overhead on the
production server.
Answer: D
Question 2.
In addition to drivers and the backup application, which software component is crucial for bringing a multiserver solution together in an EBS?
A. open file software
B. client agent software
C. device sharing software
D. database agent software
Answer: C
Question 3.
Which advantages does a tape library offer over a standalone tape drive? (Select three.)
A. increased capacity
B. increased automation
C. decreased LAN utilization
D. increased device reliability
E. increased remote device management capabilities
Answer: A, B, E
Question 4.
How does the HP StorageWorks Enterprise Backup Solution provide increased stability, adaptability, performance, seamless and faster integration?
A. by using existing LAN topologies with network-attached storage devices (NAS)
B. through high-speed, single-server communication to tape devices using direct-attached SCSI
C. by exclusively using HP hardware and software components which were extensively tested
and supported
D. through centralized backup of multiple servers, at local backup speeds, over aFibre Channel
storage network to tape libraries
Answer: D
Question 5.
A server attached to SAN Switch 16 is unable to discover a tape library.
What is a possible cause?
A. TheFibre Channel SAN Switch has an incorrect IP configuration.
B. One of the SCSI connections on the MDR does not have a terminator.
C. Thecfglibrary command was not typed at the AMC prompt of the MDR.
D. The type of SCSI module in the MDR (HVD/LVD) does not match the tape library SCSI
interface.
Answer: D
Question 6.
Which tool can receive SNMP traps and events from a Command View server (or tape library) and can launch Command View from the context of a trap?
A. HP Storage Essentials
B. HP Library & Tape Tools
C. HP Systems Insight Manager
D. HPOpenView Storage Media Operations
Answer: C
Question 7.
What is the appropriate tool to gather further information when a robotics failure occurs?
A. Library Exerciser
B. Element Status Test
C. Library Troubleshooting Flowchart
D. Library POST (Power on self test)
Answer: A
Question 8.
When experiencing a problem with a storage product, why does HP recommend generating a support ticket with HP Library and Tape Tools (L&TT) rather than performing only a device analysis test?
A. The resulting data is presented in a more useful format.
B. The device analysis test does not report media problems.
C. L&TT connects to the HP support site to search for a solution.
D. HP Support is automatically informed about the problem symptoms.
Answer: A
Question 9.
Using the EBS troubleshooting flowcharts, what should you do first when a tape drive or library is not seen from the management tool of the Fibre Channel-to-SCSI bridge?
A. Check the SCSI cable connections.
B. Verify the presence of the HBA in device manager.
C. Restore the router to the factory-default configuration.
D. Check if theFibre Channel port speed is set correctly.
Answer: A
Question 10.
You are designing a LAN backup solution for a customer who wants to back up AVI video files.
What should be considered to achieve maximum backup performance?
A. Disable push agents.
B. Turn off tape drive compression.
C. Turn on client agent compression.
D. Set the tape drive to small block sizes.
Answer: B
Question 11.
What is a best practice when configuring enterprise class tape libraries?
A. Assign LUNs in descending order.
B. Assign the robot a SCSI ID lower than the SCSI IDs of the tape drives.
C. Assign SCSI IDs of the tape drives in descending order with physical location.
D. If multiple libraries are attached to the NSR, assign LUNs to the robot and associated drives of
the highest SCSI bus first, then assign LUNs to the robot and associated drives of the next
highest SCSI bus, and so forth.
Answer: B
Copyright © 2004 CertsBraindumps.com Inc. All rights reserved.