|
Question 1. ITCertKeys.com is running SUN OS with Veritas Vol Manager. ITCertKeys.com needs to migrate a production volume from a Hitachi ti Symm Storage System while keeping the Vol online. Which command can be used? A. migratepv B. pvmove C. vxcopy D. vxevac Answer: Pending, Send your suggestions or comments at feedback@itcertkeys.com Question 2. Which information needs to be considered before starting any implementation in a database environment? A. Application and Database B. Array and the connections C. Data backup strategy D. Type or array Answer: Pending, Send your suggestions or comments at feedback@itcertkeys.com Question 3. In Addition to Raid 1 (Mirroing), Raid5 (3+1) or 7+1), which protection is supported on an EMC Symmetrix Array? A. Dynamic Sparing B. Permanent Sparing C. Raid 3 D. Raid4 Answer: Pending, Send your suggestions or comments at feedback@itcertkeys.com Question 4. What defines a complete RDBMS Database transaction? A. A read or write to any data base transaction B. Any data modification to a specific table in the database C. One committed I/O to the Database D. Unit of work that modifies or accesses the database Answer: Pending, Send your suggestions or comments at feedback@itcertkeys.com Question 5. How do you avoid performance degradation and maintain data integrity in a write intensive database with SRDF? A. Add additional SRDF-Links B. Change to Adaptive Copy Disk Mode C. Implement Engiunity Consistency Assist D. Strip the data Volumes Answer: Pending, Send your suggestions or comments at feedback@itcertkeys.com Question 6. Name the symclone argument which makes the target device mountable. A. Start B. Split C. Activate D. Create Answer: C Question 7. When you have multiple SYMAPI databases how do you determine which SYMAPI database is in use? A. defined in ORACLE_SID B. /usr/symcli/bin/symapi_db.bin C. defined in SYMCLI_DB_FILE or default D. /usr/symapi/db/symapi_db.bin Answer: C Question 8. Define the size of the Save area in a Symmetrix. A. Space should be allocated based on the amount of write activity to virtual devices B. Space should be allocated based on the number of virtual devices C. Space should be allocated based on the amount of total I/O activity D. Space should be allocated based on the number of established pairs Answer: A Question 9. Name the symrdf argument which makes a copy of data on target Symmetrix volumes available to target hosts only. A. failback B. failover C. establish D. split E. restore Answer: B Question 10: Name the purpose of the -symopt option of the symmir command in Time Finder. A. It eliminates the need to specify a device for each subsequent establish and restore sequence B. It makes a one-to-one pairing based on the order in which the devices were added C. It allows the Symmetrix to determine the best device for the BCV pair D. It uses a round robin routine to establish the BCV pairs Answer: A Question 11. For a Data Migration implementation, what is the primary benefit from using Robocopy? A. Minimum network impact B. Seamless integration with NFS C. Maintains file and directory NTFS security from source to destination D. Maintains drive letter from migration source Answer: C Question 12. Name the command which will perform a restore of DEV001 from volume VDEV002. A. symsnap -g proddg restore VDEV002 ld DEV001 B. symsnap -g proddg restore DEV001 pd VDEV002 C. symsnap -g proddg restore DEV001 ld VDEV002 D. symsnap -g proddg restore DEV001 vdev ld VDEV002 Answer: D Question 13. On a TimeFinder split command what does the PowerPath (-ppath) option do? A. The -ppath option is not valid on the split command B. Allows the use of native host devices for the split by passing PowerPath C. Forces the split command to be processed on only one path D. Suspends I/O to PowerPath devices before splitting Answer: D
|
Question 1. By default, the iPrint system uses port ___________ to send non-secure print jobs. Answer: PORT631 Question 2. When migrating volumes from a NetWare server to an OES Linux server, which are considerations you should keep in mind? (Choose 2.) A. Open files on the source volume won't be migrated, by default. B. The creation date of the files on your migrated volume will be reset to the current date. C. Linux User Management must be disabled on the destination server before starting the migration. D. If the source NetWare volume is part of a server cluster and it fails over during the migration, the Server Consolidation utility can continue the migration process using a redundant server in the cluster. E. The file ownership attribute is not preserved when migrating NetWare NSS volumes to OES Linux volumes. F. You will lose all trustee rights assignments when migrating a traditional NetWare volumes to OES Linux NSS volumes. Answer: A, B Question 3. You've just completed an upgrade of a NetWare 5.1 server to OES NetWare. You now need to install additional products. Which utilities can you use to do this? (Choose 2.) A. iManager B. Remote Manager C. Deployment Manager D. Novell Application Manager E. The Install utility in the OES NetWare server GUI Answer: C, E Question 4. Your organization's eGuide service is installed on an OES Linux server with a DNS domain name of da12.da.com. You've configured eGuide to use eDirectory as its LDAP directory service. Your users need to access the eGuide service from their workstations using a web browser. What URL should they use to do this? Answer: HTTP://DA12.DA.COM/EGUIDE Question 5. You're setting up an iFolder server in your network that will service 1800 users. The server uses a dual Pentium 4 CPU motherboard and a 500 GB RAID 3 storage array. The server is connected to workstations through a Gigabit twisted-pair Ethernet network. Does this system meet Novell's recommended design guidelines for iFolder? A. Yes, all recommendations are met. B. No, iFolder is not multiprocessor-enabled. C. No, iFolder does not support RAID 3 storage devices. D. No, a single iFolder server should serve a maximum of 1000 users. E. No, iFolder should be implemented on a fiber-optic Ethernet network. Answer: D Question 6. You're planning the deployment of a new Open Enterprise Server network. You will create a new eDirectory tree with the first OES server you install. Each server in the tree will function in a specified role. You plan to install the following servers: • DA1. DA1 will be an OES Linux server that will run NCP Server and contain NSS volumes. • DA2. DA2 will be an OES Linux server that will run NCP Server and NSS. It will also be used to create an iSCSI SAN using the other servers in the network. • DAS: DA3 will be an OES Linux server that will run NCP Server, NSS, and iFolder. • DA4: DA4 will be an OES Linux server that will run NCP Server, NSS, and NetStorage. • DA5: DA5 will be an OES Linux server that will run iManager to provide remote management services for the entire network. Which server should be the first server installed in the eDirectory tree? A. DA1 B. DA2 C. DA3 D. DA4 E. DA5 F. It doesn't matter which OES server is installed first in the eDirectory tree. Answer: F Question 7. Which file is used to configure the OpenSSH service on your OES Linux server? A. /etc/sshd.conf B. /etc/ssh/sshd.conf C. /etc/sysconfig/sshd D. /etc/ssh/sshd_config E. /etc/rc.d/initd/sshd Answer: D Question 8. Which version of eDirectory is installed by default after a NetWare 5.1 server is upgraded to OES NetWare? A. eDirectory 8.9 B. eDirectory 8.8 C. eDirectory 8.5.7 D. eDirectory 8.7.3 E. eDirectory 8.6.5 Answer: D Question 9. You need to configure a Universal Password Policy to allow users connecting to your OES Linux system to authenticate to the Novell Samba service on the server. Click the iManager category you would use to do this. Answer: Question 10. You need to deliver applications to your users and workstations that reside in remote locations outside your organization's firewall. What is required to accomplish this using ZENworks Desktop Management? A. Load Nal.nlm with the -N switch. B. Implement the ZENworks Middle-Tier server C. Load Appman.nlm with the -PASSTHROUGH switch. D. Enable dynamic NAT passthrough on the server where ZENworks is installed. Answer: B
Copyright © 2004 CertsBraindumps.com Inc. All rights reserved.