|
Can some one email me Torg dumps plzzzzzzz mcsehelp@yahoo.com
|
Can you please send the latest 642-511 dump to me.. thanks dogar
|
Question 1.
You are creating a mobile Web Form that dynamically displays news items. You want to display news items by using an instance of a mobile Text View control named Text View News. You need to configure the Web Form that contains Text View News. The Web Form must enable pagination in case a user device does not display the full text of a news item.
Which code segment should you use?
A. Dim ps As PagerStyle = New PagerStyle()ps.NextPageText = "more >"ps.PreviousPageText
= "< back"FormNews.Paginate = True
B. FormNews.PagerStyle.NextPageText = "more >"FormNews.PagerStyle.PreviousPageText =
"< back"TextViewNews.PaginateRecursive(New ControlPager(FormNews, 1000))
C. FormNews.PagerStyle.NextPageText = "more >"FormNews.PagerStyle.PreviousPageText =
"<back"FormNews.PaginateRecursive(New ControlPager(FormNews, 1000))
D. FormNews.PagerStyle.NextPageText = "more >"FormNews.PagerStyle.PreviousPageText =
"< back"FormNews.Paginate = True
Answer: D
Question 2.
You create a Web Form. The Web Form allows users to calculate values and display the results in a label named lbl Results. You need to capture all unhandled exceptions on the Web Form through the Error event. The Error event must capture each unhandled exception and display it on the Web Form.
Which code segment should you use?
A. Protected Sub Page_Error(ByVal sender As Object, _ ByVal e As System.EventArgs)
Handles Me.Error lblResults.Text = e.ToString() e = Nothing End Sub
B. Protected Sub Page_Error(ByVal sender As Object, _ ByVal e As System.EventArgs)
Handles Me.Error lblResults.Text = Server.GetLastError().ToString() Server.ClearError()End
Sub
C. Protected Sub Page_Error(ByVal sender As Object, _ ByVal e As System.EventArgs)
Handles Me.Error Response.Write(e.ToString()) e = Nothing End Sub
D. Protected Sub Page_Error(ByVal sender As Object, _ ByVal e As System.EventArgs)
Handles Me.Error Response.Write(Server.GetLastError().ToString()) Server.ClearError()End
Sub
Answer: D
Question 3.
You create a Web site that is for members only. The Web site allows members to create lists of users that have access to information about member profiles. The name of the list is stored in the listName variable. The user name of the user to whom access is given is stored in the username variable. You need to enable members to manage their lists of users.
Which code segment should you use?
A. Roles.CreateRole(listName)User.IsInRole(listName)
B. Roles.CreateRole(listName)Roles.AddUserToRole(userName, listName)
C. Roles.RoleExists(listName)Roles.AddUserToRole(userName, listName)
D. Roles.RoleExists(listName)User.IsInRole(listName)
Answer: B
Question 4.
You create a Web Form that displays a Grid View. The Grid View’s data source is a Dataset named ds orders. The Dataset contains two Data Tables named Orders and Order Details. You create a relation between the two Data Tables using the following code segment. (Line numbers are included for reference only.)
01 dtOrders = dsOrders.Tables("Orders")
02 dtOrderDetails = dsOrders.Tables("OrderDetails")
03 colParent = dtOrders.Columns("OrderID")
04 colChild = dtOrderDetails.Columns("ParentOrderID")
05 dsOrders.Relations.Add("Rel1", colParent, colChild, False)
You need to find the cause of the exception being raised in line 05. What should you do?
A. Ensure that the child column and the parent column have the same names.
B. Ensure that the child table and the parent table have the same names.
C. Ensure that the child column and the parent column have the same data types.
D. Ensure that each row in the child table has a corresponding row in the parent table.
E. Ensure that the tables have an explicit relationship defined by a foreign key constraint in the
database.
Answer: B
Question 5.
You are creating a Web Form. You write the following code segment to create a SqlCommand object.Dim conn As SqlConnection = New SqlConnection(connString)conn. Open()Dim cmd As SqlCommand = conn.CreateCommand()cmd.CommandText = "select count(*) from
Customers" You need to display the number of customers in the Customers table.
Which two code segments can you use to achieve this goal? (Each correct answer presents a complete solution. Choose two.)
A. Dim customerCount As Object = cmd.ExecuteScalar() lblCompanyName.Text =
customerCount.ToString()
B. Dim customerCount As Integer = cmd.ExecuteNonQuery() lblCompanyName.Text =
customerCount.ToString()
C. Dim dr As SqlDataReader = cmd.ExecuteReader()dr.Read() lblCompanyName.Text =
dr(0).ToString()
D. Dim dr As SqlDataReader = cmd.ExecuteReader()dr.Read() lblCompanyName.Text =
dr.ToString()
Answer: A, C
Question 6.
You load an XmlDocument named doc with the following XML.
<bookstore>
<books>
<book genre="reference" >
<title>Dictionary</title>
</book>
<book genre="reference" >
<title>World Atlas</title> <
/book>
</books>
</bookstore>
You need to change the value for the genre attribute to NA for all book attributes. First, you add the following code segment to your class. Dim root As XmlElement = doc.DocumentElementDim nodes As XmlNodeList = root.SelectNodes("books/book")
Which additional two code segments can you use to achieve this goal?
(Each correct answer presents a complete solution. Choose two.)
A. Dim node As XmlNodeFor Each node In nodes node.Attributes(0).Value = "NA"Next node
B. Dim node As XmlNodeFor Each node In nodes node.Attributes(1).Value = "NA"Next node
C. Dim node As XmlNodeFor Each node In nodes Dim genre As XmlNode =
node.SelectSingleNode("/genre") genre.Value = "NA"Next node
D. Dim node As XmlNodeFor Each node In nodes Dim genre As XmlNode =
node.SelectSingleNode("@genre") genre.Value = "NA"Next node
E. Dim node As XmlNodeFor Each node In nodes Dim genre As XmlNode =
node.SelectSingleNode("genre") genre.Value = "NA"Next node
Answer: A, D
Question 7.
Your Web site processes book orders. One of the application methods contains the following code segment. Dim doc As New XmlDocument()doc.LoadXml("<book><discount>10</discount>"
&_"<title>Dictionary</title></book>")You need to remove the discount element from
XmlDocument.
Which two code segments can you use to achieve this goal? (Each correct answer presents a complete solution. Choose two.)
A. Dim root As XmlNode = doc.DocumentElementroot.RemoveChild(root.FirstChild)
B. Dim root As XmlNode =
doc.DocumentElementroot.RemoveChild(root.SelectSingleNode("discount"))
C. doc.RemoveChild(doc.FirstChild)
D. doc.DocumentElement.RemoveChild(doc.FirstChild)
Answer: A, B
Question 8.
You develop a Web application that writes data to a file on a server. You restrict access to the file to specific Windows users. The Web application runs as CONTOSO\ASPNET. You deny anonymous access to the application in IIS. You add the following XML segment in the Web.config file.<authentication mode="Windows"/>You need to ensure that the application meets the following requirements: It must impersonate the user when it writes data to the file. It must run as CONTOSO\ASPNET when a user does not access the file.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Use the following XML segment in the Web.config file. <identity impersonate="false"/>
B. Use the following XML segment in the Web.config file. <identity impersonate="true"/>
C. Use the following code segment to access the file. Dim wp As WindowsPrincipal =
_CType(HttpContext.Current.User, WindowsPrincipal) Dim wi As WindowsIdentity =
WindowsIdentity.GetCurrent() Dim wic As WindowsImpersonationContext = wi.Impersonate()'
Access the file herewic.Undo()
D. Use the following code segment to access the file. Dim wi As WindowsIdentity =
indowsIdentity.GetCurrent()Dim wic As WindowsImpersonationContext =
_WindowsIdentity.Impersonate(wi.Token)' Access the file herewic.Undo()
Answer: A, C
Question 9.
You are working on an existing Web site. You need to secure the Web site by redirecting all users to the logon page, Login.aspx. After logging on, users must be sent back to the page that they originally requested.
Which code segment should you use?
A. In the Web.config file: <authorization> <deny users="?" /></authorization> On each page in
the Web site: Protected Sub Page_Load(ByVal sender As Object, _ ByVal e As
System.EventArgs) Handles Me. Load FormsAuthentication.Initialize() End Sub
B. On each page in the Web site: Protected Sub Page_Load(ByVal sender As Object, _ By Vale
As System.EventArgs) Handles Me. Load Forms Authentication Redirect To Login Page
("login.aspx") End Sub
C. On each page in the Web site: Protected Sub Page_Load(ByVal sender As Object, _ By Vale
As System.EventArgs) Handles Me. Load Response.Redirect("login.aspx") End Sub
D. In the Web.config file: <authentication mode="Forms"> <forms name=".ASPXUSERDEMO"
loginUrl="login.aspx" protection="All" timeout="60" /></authentication>
Answer: D
Question 10.
You are developing a Web application. The Web application restricts access to an administrative page. The Web application uses the following code segment to protect the page.
If Page.User.Identity.Name <> "CONTOSO\Administrator" Then
Response.Redirect("login.aspx")
End If
You are logged on as Administrator. When you display the page, you are redirected to Login.aspx. You discover that the User.Identity.Name property is not being correctly populated. You need to ensure that you can access the page when you are logged on as Administrator.
Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)
A. In the Web.config file, enable impersonation.
B. In IIS, enable anonymous access.
C. In IIS, disable anonymous access.
D. In the Web.config file, set the authentication mode to Windows.
Answer: C, D
Question 11.
You create a new custom control by extending a standard Text Box control.
You need to replace the default icon for the control with your own custom icon.
What are two possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose two.)
A. Add the bitmap file that contains the custom icon to the custom control project. Set it's Build
Action property to Compile in the properties window.
B. Add the bitmap file that contains the custom icon to the custom control project. Decorate the
control class with the Toolbox Bitmap attribute, and specify the location of the bitmap file for
the icon.
C. Add the bitmap file that contains the custom icon to the custom control project. Give the bitmap
file the same name as your control class, and use the .bmp or .ico file name extention.
Set it's Build Action property to Embedded Resource in the Properties window.
D. Add the bitmap file that contains the custom icon to the custom control project. Give the bitmap
file the same name as your control class, and use the .bmp or .ico file name extention.
Set the Copy to Output Directory property of the bitmap to Copy always.
Answer: B, C
Question 12.
You are creating a Windows Form that includes print functionality. The form includes a Print Document control. A Print Page event handler contains code that renders the form data to a default printer.
You need to display a preview of the printed document along the lower edge of the form.
A. Set the Printer Settings Printer Name property of the Print Document control to Preview.
B. Add a second Print Document control to your form. Set the Print Controller property of the
Print Document type to a new instance of the Preview Print Controller type.
C. Add a Print Preview Control control to your form. Set the PrinterSettings.PrinterName property
of the Print Document control to the Name property of the PrintPreviewControl control.
D. Add a Print Preview Control control to your form. Set the Document property of the
PrintPreviewControl control to the existing Print Document instance
Answer: D
Question 13.
You are creating a Windows Forms application that manages document creation. You need to display a customized print preview of the document that show within the main form. You want the customized view to display without the standard print preview user control.
What should you do?
A. Use the Print Preview Dialog component. Set the Document property to the document to be
printed. Use the Show Dialog method to display the control.
B. Use the Print Preview control. Set the Document property to the document to be printed.
C. Use the Print Preview Dialog component. Set the Document property of the control to the
document to be printed. Use the Show method to display the control. Use the Main Menu Strip
property to configure the user controls you want.
D. Use the Print Preview control. Set the Name property to the name of the document to be
printed.
Answer: B
Question 14.
You are creating a Windows Forms application. Users need to preview print jobs before printing from the application.
You added a Print Document component and Print Preview Dialog component to the form.
You need to configure the application to allow users to preview print jobs. You want to achieve this goal by using the minimum amount of effort.
Which three action should you perform? (Each correct answer presents part of the solution.
Choose three.)
A. Set the PrintPreviewDialog.Document property to the Print Document component instance.
B. Add a PringDialog component to the form.
C. Set the PrintDialog.Document property to the Print Document component instance.
D. Create an event handler for the PrintDocument.PrintPage event.
E. Call the PrintDialog.ShowDialog method.
F. Call the PrintPreviewDialog.ShowDialog method.
Answer: A, D, F
Question 15.
You are modifying an existing installation package for your application. Your application requires Microsoft Windows Server 2003 and will not run on Microsoft Windows 2000 Server. You add the following condition to the primary output of your installer. Version NT >= 502
Users who previously attempted to install your application on Windows 2000 Server report that they still cannot install your application after than upgrade to Windows Server 2003.
You need to ensure that users who upgrade the operating system on their servers to meet your launch condition can successfully install your application.
What should you do?
A. Set the Transitive property of the primary output to True.
B. Change the Upgrade Code property of your Setup application.
C. Set the Vital property of the primary output to True.
D. Change the launch condition of your primary output to Version NT >= 500.
Answer: A
Question 16.
You created a custom action for your Windows setup application. The custom action runs a standard Console application at the end of the installation process. You place the custom action in the Install node of the Custom Actions tree in the Custom Actions Editor. The Console application executable performs correctly when run as a stand-alone application. However, when you run the Microsoft Windows Installer package that was created by your setup application, the custom action does not run. Everything else works fine. You need to ensure that the console application runs during the install.
What should you do?
A. Set the Installer Class property of your custom action to False.
B. Place the custom action in the Commit node of the Custom Action tree rather than in the Install
node.
C. Set the Detect Newer Installed Version property for your setup application True.
D. Set the Install All Users property for your setup application to True.
Answer: A
Question 17.
You are configuring a Click Once deployment that allows users to install your application from the Internet zone under partial trust permission. You want the application to access data that resides on the same remote server from the application is installed.
You need to add one of more types of data access that are allowed under partial trust permissions to your application.
Which type or types of data access are allowed? (Choose all that apply.)
A. data access through HTTP with System.Net.WebClient
B. data access through XML Web services
C. data access through System.Data.SqlClient
D. data access through HTTP with System.Net.HttpWebRequest
Answer: A, B, D
|
Plz upload new dump, advance thankx..
|
The .pdf titled "Oracle 10g 1Z0-040 latest dumps" posted on Feb. 6th 2008 is where it's at. Just passed with 96 today (05/28/08). Watch the VPD and Data Pump quesitons.
|
Anybody took this exam recently?
|
Question 1.
You work as the exchange administrator at ITCertKeys.com. The ITCertKeys.com network contains an Exchange Server 2007 Organization. The Active Directory structure of ITCertKeys.com consists of a root domain and a single child domain. The root domain is in ITCertKeys1 and the child domain in ITCertKeys2. You are in the process of installing Exchange Server 2007 in the child domain. In order to accomplish this task you decide to run the Setup /PrepareADcommand in the root domain. In your solution you need to ensure that Exchange can be installed on the child domain as well.
What should you do? (Each correct answer presents a complete solution. Choose TWO.)
A. You should run the Setup /ForestPrep command in the root domain.
B. You should run the Setup /PrepareAllDomains command in the root domain.
C. You should run the Setup /PrepareDomain command in the root domain.
D. You should run the Setup /PrepareDomain command in the child domain.
Answer: B, D
Question 2.
You work as the exchange administrator at ITCertKeys.com. The ITCertKeys.com network contains an Exchange Server 2007 Organization. The Active Directory forest of ITCertKeys.com contains a single site named ITCertKeysA. ITCertKeysA consists of a root domain and a single child domain. You have received instruction from the CIO to prepare the Active Directory as well as the domains. This task needs to be accomplished before you install the Exchange Server 2007
server.
What should you do? (Each correct answer presents part of the solution. Choose TWO.)
A. You should run the Setup /PrepareAllDomains command.
B. You should run the Setup /ForestPrep command.
C. You should run the Setup /PrepareAD command.
D. You should run the Setup /DomainPrep command.
Answer: A, C
Question 3.
You are employed as the exchange administrator at ITCertKeys.com. The ITCertKeys.com network contains an Exchange 2007 Organization. ITCertKeys.com has its headquarters in Stockholm where you are located. Due to company growth ITCertKeys.com opens a branch office in Athens and hires another administrator named Amy Wilson. You have received instruction from the CIO to configure the least amount permissions necessary for Amy Wilson who must be enabled to prepare Active Directory for Exchange Server 2007.
What should you do?
A. You must add the user account of the administrator to an Enterprise Admins group. You must
add the administrator to an Exchange Full Administrator at the organizational level.
B. You must add the user account of the administrator to the Exchange Enterprise Server group.
You must add the user account of the administrator to the Domain Admins group.
C. You must add the user account of the administrator to an Enterprise Admins group.
You must add the user account of the administrator to a Schema Admins group.
D. You must add the user account of the administrator to the Domain Admins group.
You must add the administrator to an Exchange Full Administrator at the organizational level.
Answer: D
Explanation:
The user is required to be a domain admin and Exchange Full Administrator. Does not require to be a member of the schema admins group as it does not mention having to extend the schema due to Windows 2008 upgrade etc.
Question 4.
You are employed as the exchange administrator at ITCertKeys.com. The ITCertKeys.com Exchange Server network has just been migrated to Exchange Server 2007. You are responsible for managing the Exchange network for ITCertKeys.com. Every mailbox server on the ITCertKeys.com network is configured with two storage groups as well as two databases for each of the storage groups. You have received instruction from the CIO to ensure that the ITCertKeys.com Exchange Server network is fault tolerant. You thus decide to implement local continuous replication (LCR). Now you need to configure the Mailbox server with LCR.
What should you do?
A. First change the ratio to a single database per storage group.
Then run the Enable-DatabaseCopy cmdlet.
Then run the Enable-StorageGroupCopy cmdlet.
B. First run the Disable-StorageGroupCopy cmdlet.
Then change the databases into a single storage group.
Then run the Enable-StorageGroupCopy cmdlet.
C. First change the database ratio to a single database per storage group.
Then run the Disable-StorageGroupCopy cmdlet.
Then run the Enable-DatabaseCopy cmdlet.
D. First run the Disable-StorageGroupCopy cmdlet.
Then change the databases ratio into a single storage group.
Then run the Enable-DatabaseCopy cmdlet.
Answer: A
Question 5.
You are employed as the exchange administrator at ITCertKeys.com. You are in the process of installing a new Exchange Server 2007 Organization. The native Exchange Server 2007 environment of ITCertKeys.com has the following server roles installed:
* One Edge Transport server named ITCertKeys-EX01
* One Hub Transport server named ITCertKeys-EX02
You have received instruction from the CIO to configure the e-mail routing. In your solution you need to ensure that ITCertKeys-EX01 is configured is such a way so as to route e-mail between the Exchange organization and the Internet; and that ITCertKeys-EX02 is configured in such a way so as to route Internet e-mail to ITCertKeys-EX01.
What should you do? (Each correct answer presents part of the solution. Choose TWO.)
A. On ITCertKeys-EX02, first open the Exchange Management Console.
Then import the Edge Subscription file.
B. On ITCertKeys-EX01, first create a new Send connector named ITKEdge - Internet.
Then add the *domain as an address space and specify to use DNS to route e-mail
automatically. Then add ITCertKeys-EX01 as a source server.
C. On ITCertKeys-EX02, first create a new Send connector named ITKHub. Then add the
*domain as an address space and specify to use DNS to route e-mail automatically.
Then add ITCertKeys-EX02 as a source server.
D. On ITCertKeys-EX01, first open the Exchange Management Shell.
Then export a new Edge Subscription file.
Answer: A, D
Question 6.
You work as the exchange administrator at ITCertKeys.com. The ITCertKeys.com network contains an Exchange Server 2007 Organization. You are responsible for managing the Exchange network for ITCertKeys.com. You are currently preparing your Exchange 2007 organization in order to install the Mailbox server role on a newly purchased Exchange Server 2007 server named ITCertKeys-EX10. You have received instruction from the CIO to ensure that the ITCertKeys-EX10 read and write performance is optimal. In addition you also need to implement redundancy on ITCertKeys-EX10. You thus have to choose the appropriate type of array on which the mailbox database should be placed.
What should you do?
A. Make use of a dedicated RAID 10 array.
B. Make use of a dedicated RAID 0 array.
C. Make use of a dedicated RAID 1 array.
D. Make use of a RAID 1 array that contains the operating system partition.
Answer: A
Question 7.
You are employed as the exchange administrator at ITCertKeys.com. You are in the process of converting your Exchange 2000 Server environment to Exchange Server 2007. The ITCertKeys.com network contains a Windows 2000 native mode Active Directory domain as well as an Exchange 2000 organization. The Exchange 2000 organization is configured to run in mixed mode. You have been informed by the CIO that the schema master, the domain naming master as well as the PDC emulator all run on a Microsoft Windows 2000 Server domain controller. You receive instructions to prepare the environment for Exchange 2007.
What should you do? (Each correct answer presents part of the solution. Choose TWO.)
A. You should change the mixed mode Exchange 2000 organization to native mode.
B. You should move the PDC emulator role to a Windows Server 2003 domain controller that has
Service Pack 1 installed.
C. You should move the schema master role to a Windows Server 2003 domain controller that
has Service Pack 1.
D. You should move the domain naming master role to a Windows Server 2003 domain controller
that has Service Pack 1.
Answer: A, C
Question 8.
You are employed as the exchange administrator at ITCertKeys.com. The ITCertKeys.com network contains an Exchange 2007 Organization. You are responsible for managing the Exchange network for ITCertKeys.com. You decide to install a two-node Single Copy Cluster (SCC) Mailbox server on the Exchange Server 2007 organization of ITCertKeys.com. You then name the network adapters ITKPublic and ITKPrivate. You have received instruction from the CIO to configure the TCP/IP binding order for the cluster servers.
What should you do?
A. You should move the Public connection to the top of the Adapters and Bindings tab.
B. You should move the Private connection to the top of the Adapters and Bindings tab.
C. You should open the properties of the cluster and move the ITKPrivate network to the top of
the Network Priority tab.
D. You should open the properties of the cluster and move the ITKPublic network to the top of the
Network Priority tab.
Answer: A
Explanation:
The Public connection must be first in order in the binding tab.
Question 9.
You are employed as the exchange administrator at ITCertKeys.com. The ITCertKeys.com network contains an Exchange Server 2007 Organization. ITCertKeys.com has its headquarters in Chicago and a branch office in Dallas. You have been assigned to the Dallas site office. Your instructions are to install Exchange Server 2007 on the new server. To ensure that no problems occur that might hinder the users of the Dallas site to perform their duties you decide to install the required components on the new server before you install Exchange Server 2007.
What should you do? (Each correct answer presents part of the solution. Choose THREE.)
A. Install Windows PowerShell 1.0.
B. Install Network News Transfer Protocol (NNTP).
C. Install Simple Mail Transfer Protocol (SMTP).
D. Install Microsoft Management Console (MMC) 3.0.
E. Install Microsoft .NET Framework 1.1.
F. Install Microsoft .NET Framework 2.0
Answer: A, D, F
Question 10.
You work as the exchange administrator at ITCertKeys.com. The ITCertKeys.com network contains an Exchange Server 2007 Organization. You are responsible for managing the Exchange network for ITCertKeys.com. The ITCertKeys.com network contains a stand-alone server named ITCertKeys-EX01. You have received instruction from the CIO to install the appropriate Exchange Server 2007 server role on ITCertKeys-EX01.
What should you do?
A. The Hub Transport server role should be installed on ITCertKeys-EX01.
B. The Mailbox server role should be installed on ITCertKeys-EX01.
C. The Client Access server role should be installed on ITCertKeys-EX01.
D. The Edge Transport server role should be installed on ITCertKeys-EX01.
Answer: D
|
thanks buddy
|
New Collection: thanks to itcertkeys
|
hello folks.. this site rocks must visit itcertkeys.com thanks
Copyright © 2004 CertsBraindumps.com Inc. All rights reserved.