Question 1.
An administrator currently has Secure Gateway and web interface on the same server in the DMZ. After learning about Access Gateway, the administrator decided to purchase two units for redundancy that will be located in the DMZ and implement the increased functionality that Access Gateway offers. Two new Interface servers will be introduced. 

Where should the administrator place the web interface servers?

A. Both Web Interface servers should be placed in the DMZ
B. One Web interface server should be placed on the internal network and one web interface 
    server should be placed on the external network
C. Both Web Interface servers should be placed on the internal network
D. One web interface server should be placed in the DMZ and one web interface server should 
    Be placed on the internal network

Answer: C

Explanation:
When you remove Secure Gateway from the DMZ and replace it with the Access Gateway, you can move the Web Interface to your internal secure network. The Access Gateway authenticates and authorizes users and then connects to the Web Interface. This provides greater security because there are two fewer Windows servers in the DMZ. (Installation Guide p.102)

Question 2.
An administrator decided to make a number of video-based training packages available to the Finance department through Citrix XenApp. The Citrix XenApp farm silo's its applications and all Finance Applications are in the Finance Application silo. Other application silos include Technical, Sales and workflow. 

Where can an administrator enable multimedia optimization for the finance training applications?

A. A policy applied to all finance users
B. Server properties
C. Server farm properties
D. A policy applied to all servers in the finance application silo

Answer: B

Explanation:
All SpeedScreen Options are configured on a Per server or Per Farm Basis using the Properties Page of the Fram or each individual Server. Exceptions here are the SpeedScreen Latency Reduction (Done on a Per Server Basis using the "SpeedScreen Latency Reduction Manager") And SpeedScreen Image Acceleration (Done using Policies). In this case it would be the server Properties because the settings need to beapplied only for the finance app and they have their 2 own Application silo.

Question 3.
What should an administrator use to confirm the name of a Citrix License Server?

A. The hostname command in a command prompt
B. The basic information screen in the Windows 2008 system applet
C. The query command in a command prompt
D. The server information screen in the Access Management Console

Answer: A

Explanation:
The command hostname is correct. This is the easiest way to identify what hostname a server is currently using.

Question 4.
A single web interface server named xenappweb1.mycompany.com is currently being leveraged to host applications for Citrix users through HTTP. For additional redundancy and security as  equired by management, a second web interface server named xenappweb2.mycompany.com will be made available and load-balanced with a hardware load balancer and SSL will be used to secure all traffic to the web interface servers. 

In order to configure the environment to meet the requirements defined above, which three statements are valid configuration steps? (Choose three.)

A. Create a new load balancing group on the load balancer that contains the web interface sites 
    from each web interface server that are to be load balanced
B. Create a new DNS entry for xenapp.mycompany.com and assign it the IP Address of the VIP 
    on the hardware load balancer
C. Install a root certificate on each web interface server that matches the certificate on the load 
    balancer
D. Create a new CNAME alias a DNS for xenapp.mycompany.com and add both web interface 
     server names to the record for load balancing
E. Install a separate SSL certificate on each server that matches the FQDN of each server

Answer: A, B, C

Explanation:
Creating a CNAME Allias would be a valid way of doing things if you did not have Hardware load balancer. This would round Robin connections to each WebServer using DNS Round Robining. Installing a seperate SSL Certificate matching the FQDN for each server would result in Certificate errors in the Browser because the initial connection would be to the load balancer and that has a different FQDN.

Question 5.
An administrator configured a session bandwidth policy. The administrator set a maximum bandwidth rule of 200 Kbps and placed a 50 Kbps and a 30% restriction on the audio channel. The effective bandwidth for the audio channel will be _______________ kbps? (Choose the correct option to complete the sentence.)

A. 50
B. 60
C. 15
D. 200

Answer: A

Explanation:
50 is lower than 30% (which would be 60) so the 50 is what will be the effective limit as both have been defined but 50 would be reached first. Default full load is 90% and default no load is 10% 

Question 6.
To which Citrix service does Web Interface forward a user's logon credentials?

A. MFCOM
B. Independent Management Architecture
C. WMI
D. XML

Answer: D

Explanation:
The Citrix Web Interface communicates only with the XML Service on the Xenapp Server. This is by default port 80 or 443 if SSL ecryption is configured. It may be changed however if the need arises.

Question 7.
How can an administrator turn off a policy rule without having to edit every policy that contains that rule?

A. Lower the priority of the policy
B. Change the Policy to deny
C. Delete the Policy
D. Change the rule in the highest priority policy to disabled

Answer: D

Explanation:
Rules in a higher ranked policy override the same rules in a lower ranked policy. (Course Ware p.349)

Question 8.
The Citrix License Management Console runs on which two supported web servers? (Choose two.)

A. Sun Java System Web Server
B. Microsoft Internet Information Services (IIS)
C. Apache HTTP Server
D. IBM HTTP server

Answer: B, C

Explanation:
The License Management Console runs as a Web service. Configure a Web service-either Apache or IIS-before you install the License Management Console. (Citrix eDocs on Licensing: Licensing Your Product->Getting Started with Citrix Licensing->Prerequisites->Configuring a Web Service)

Question 9.
An administrator wants to provide access to a group of help desk users to manage sessions remotely on a server. 

Which two options are the most secure ways of solving this issue using the least privilege security model? (Choose two.)

A. Assign only the administrative rights required within the Access Management Console
B. Assign only the administrative rights required within the XenApp Advanced Configuration Tool
C. Instruct the help desk users to install the XenApp Advanced Configuration tool and manage 
    sessions from their workstation
D. Instruct the help desk users to install the Access Management Console and manage sessions 
    from their workstation

Answer: A, D

Explanation:
Almost all Managemnt Tasks have been moved to the Acces Managment Console in Xenapp 5.0. Th Advanced Configuarion Tool (Perviously the CMC) only handels Policies, zone and Printer Features now.

Question 10.
Several new policies were recently created in a Citrix XenApp farm. A user has called stating that he cannot see client drivers or printers when connecting to the farm since the polices were implemented. 

What could an administrator use to determine which policies are conflicting?

A. Policies Search Engine
B. Report Center
C. Event Viewer
D. Diagnostic Facility

Answer: A

Explanation:
The Policy search engine can be used to see a resultant set of Policies based on Criteria that the admin can define in the search. The first step when trouble shooting Policies should always be to use the Policy Search Engine to view the resultant policy.

	Web www.certsbraindumps.com