Question 1.
ITCertKeys.com has installed a new disk drive in the upper left slot of their Sun Fire V240 (disk 2). They are unable to see the disk from the operating system. 

How can you make the disk visible to Solaris?

A. Reseat the drive and reboot after power down.
B. Run format at the operating system level.
C. Perform a boot -av to see if the system recognises the disk.
D. Use boot -r to reconfigure the system.

Answer: D

Question 2.
ITCertKeys.com requires highly available access to their data. They want to gain the performance benefits offered by RAID 0 and the availability benefits by RAID 1. You recommend using Solaris Volume Manager to create a RAID 0+1 volume. 

How should you accomplish this?

A. Create a RAID 0+1 structure in which all stripe components are identical.
B. Create a RAID 5 and then run metaset -A.
C. Run the metaset command.
D. Edit the /kernel/drv/md.conf file.

Answer: A

Question 3.
After replacing a failed external disk on a Sun Fire E4900, you are performing a disk format test, and the customer would like to keep the data. 

What test can you run that will preserve the data?

A. verify
B. write
C. refresh
D. compare

Answer: C

Question 4.
A Sun Fire 6800 using MPxIO has two paths connected to a Sun StorEdge 6320. 

What command should you run to determine if the state is Online and Primary?

A. luxadm list 
B. luxadm show 
C. luxadm display 
D. luxadm probe 

Answer: C

Question 5.
ITCertKeys.com has installed and configured a new Ethernet PCI card in a Sun Fire V880, but reports that it is not working. 

What Solaris OS command should you recommend the customer use to verify the setup of the new card?

A. ipconfig
B. test-all
C. ifconfig
D. watch-net
E. netconnect

Answer: C

Question 6.
ITCertKeys.com firewall is blocking ssh logon access to a newly installed desktop server.

What port(s) need to be opened on the firewall to allow ssh traffic on the default port(s)?

A. 443
B. 22 and 23
C. 20 and 21
D. 22

Answer: D

Question 7.
PTS requests the status of the LEDs of the event monitoring unit (EMU) in order to troubleshoot a failure on a StorEdge 3310 Array. The LED status is: 
Click the Exhibit button.

Which letter designates the location of the EMU?
 

A. D
B. A
C. B
D. C

Answer: A

Question 8.
A Sun Blade 150 has been moved to another part of the building and now the following error message is displayed at boot:
Can't stat /dev/rdsk/c2t4d0s0
CAN'T CHECK FILESYSTEM
Unexpected inconsistency ; RUN fsck MANUALLY
Unable to repair one or more filesystems
The system remains in single user mode and will not fsck manually.

What should you do to repair this problem?

A. Replace the disk with a known good one.
B. Run fsck -y /dev/rdsk/c2t4d0s0 to cure the problem.
C. Check /etc/vfstab to see if the disk is mounted automatically.
D. Check that the disk is powered on and cabled correctly.

Answer: D

Question 9.
You want to mount a filesystem provided by an NFS server (hostname server). This will allow the project managers to access the project filesystem (/projects). 

What file should you edit on the client, and what entry should you make to ensure it is mounted every time the system is booted?

A. /etc/vfstab
    server:/projects - /projects nfs - yes -
B. /etc/dfs/dfstab
    share -F nfs /projects
C. /etc/dfs/dfstab
    dfshare -F nfs /projects
D. /etc/vfstab
    share -F nfs /projects

Answer: A

Question 10.
You are performing the initial installation configuration on a Sun StorEdge T3+ array. 

What command serves to define the network parameters necessary for the installation?

A. fru
B. sys
C. set
D. lpc

Answer: C

	Web www.certsbraindumps.com