|
Question 1.
One of your enterprise customers has engaged your services in designing and implementing their wireless network. You expect this network to have high traffic levels.
What are two weaknesses in WEP that would make you choose to implement WPA? Select TWO.
A. There is a flaw in the RC4 encryption algorithm in WEP.
B. The XOR operation in WEP creates cipher text that is not complex enough.
C. WEP encryption keys are sent over the air in clear text.
D. WEP keys are statically configured on all access points and clients.
E. The Initialization Vector (IV) in WEP is too short.
Answer: D, E
Question 2.
A customer places a ProCurve 520wl with a single ProCurve 170wl 802.11g card installed in the lobby of the building to allow guests to access the Internet. Because employees may want to also access the Internet and corporate intranet from the lobby, he wishes to separate guest traffic from employee traffic using VLANs.
How can he configure the access point to achieve this goal?
A. Configure two separate tagged VLANs on the access point card and associate them both with
the same SSID.
B. Configure two separate tagged VLANs on the access point card and associate each with its
own SSID.
C. Configure two separate untagged VLANs on the access point card and associate each with its
own SSID.
D. Configure the access point to require 802.1X authentication and configure a RADIUS server to
supply VLAN attributes based on individual logins.
Answer: B
Question 3.
You have a client who is upgrading his wireless network to improve security. He is going to implement Enterprise WPA instead of WEP.
Which benefits will he gain by using WPA? Select TWO.
A. port-access authentication using 802.1X
B. better encryption of data using 3DES instead of RC4
C. seamless roaming through the use of a linger timer
D. per packet encryption key rotation using TKIP
E. client/access point authentication using shared keys
Answer: A, D
Question 4.
You have a customer who wants to use the web-based authentication feature on his ProCurve switch to improve security on his wireless LAN. In order for a client to access network resources, the customer must ________.
A. configure a DHCP scope on the switch to provide temporary IP addresses while they are being
authenticated
B. set the client-limit switch parameter to at least 2 to permit more than one device to connect
through a given port
C. configure the switch with the MAC addresses of each wireless client that will connect through it
D. enable the client-moves parameter to allow clients to move from wired connections to the
wireless network
Answer: B
Question 5.
You have a new customer who is very concerned about the security of his internal campus network. You suggest that the HP ProCurve Access Control Solution may provide the level of safety and security that he is looking for.
Which options are part of the HP ProCurve Access Control Solution? Select THREE.
A. Web Authentication
B. Intrusion Detection Systems
C. Hardware Firewalls
D. Access Control Lists
E. 802.1X Authentication
F. Virtual Private Networks
G. Anti-Virus Software
Answer: A, D, E
Question 6.
A pharmaceutical company has recently moved into a new three-story office building. They are sharing a core routing switch between two departments: human resources, and research and development. Both departments have edge switches deployed and neither department wants the other to have management access to their respective HP ProCurve edge switches.
Which security measures would be recommended to limit management access to the respective departments? Select TWO.
A. SSH
B. SSL
C. Authorized IP Managers
D. management VLANs
E. Microsoft Windows User Domain Security limits
Answer: C, D
Question 7.
In designing a wireless network, the customer needs to have wireless coverage in their warehouse facility for the automated picking and bar-coding inventory system.
The warehouse is a wide open space filled with tall, multi-bay steel racks that are filled with an inventory of large metal pumps and valves. To get sufficient coverage down these long aisles, which antenna would you recommend?
A. omni-directional mast
B. parabolic dish
C. directional patch
D. omni-directional dipole
Answer: C
Question 8.
A customer has asked you to design a wireless network for his office using HP 420 Access Points. In one area you decide to use a directional antenna to ensure that the wireless signal propagates down a long hallway. If you wish to limit the radiated power to 1 Watt, what is the highest gain directional antenna that you can use if the access point it is connected to is transmitting at full power?
A. 2 dBm
B. 6.5 dBm
C. 10 dBm
D. 14 dBm
Answer: C
Question 9.
During a wireless implementation for a local college you plan to use omni-directional diversity antennas for the internal public areas of the campus.
You chose these antennas because they provide RF coverage in ________ of the antenna.
A. a concentrated direction around the horizontal axis
B. all directions around the vertical axis
C. a particular direction along the vertical axis
D. all directions around the horizontal axis
Answer: B
Question 10.
When designing wireless networks, it is important to remember that government agencies limit the power of RF based networks in certain radio bands. The emitted power of a radio transmitter and any attached antenna is known as its ________.
A. Radiated Radio Frequency Power
B. WIreless System Power Radiation
C. Effective Isotropic Radiated Power
D. Effective Total Power Output
Answer: C
Question 11.
You are installing an access point that is transmitting at 16 dBm. It is connected to a directional patch antenna with a rating of 6.5 dBi through a cable and connector set that is rated at 2.5 dBi.
What is the effective gain of this configuration?
A. 25 dB
B. 20 dB
C. 12 dB
D. 30 db
Answer: B
|
Question 1.
A CallPilot customer site will be using Multimedia Messaging. The switch will need a specific kind of configuration for this messaging service.
What is the required configuration?
A. Regular DN
B. Phantom DN
C. Control DN (CDN)
D. ACD-DN dummy queue
Answer: C
Question 2.
With CallPilot RIs. 5.0, when upgrading to a new release of CallPilot, the number of reserved seats may now be reduced. You are performing an upgrade on a CallPilot RIs. 4.0 system with a keycode that authorizes 500 Fax messaging seats. Only 200 Fax messaging seats are currently in use.
Which is the minimum number of Fax messaging seats that can be authorized with a new RIs. 5.0 keycode?
A. 100
B. 200
C. 250
D. 500
Answer: B
Question 3.
You are preparing to install CallPilot RIs.5.0 for a customer. The customer wants to access the CallPilot system from the LAN and must provide some information for the installation.
What information must the customer provide?
A. DHCP server
B. a Cat-5 cable
C. an Ethernet switch
D. a static IP address and subnet mask
Answer: D
Question 4.
When installing CallPilot Reporter, what is a valid installation option?
A. Client PC
B. CallPilot server
C. Administrator PC
D. Customer provided Web server
Answer: D
Question 5.
An administrator cannot login to CallPilot Manager from the login web page. You have confirmed that the administrator is entering their correct mailbox number and password and that their mailbox is not disabled.
What should you check?
A. that the user's PC is running Internet Information Server (IIS)
B. that the Server field contains the correct server name for the CallPilot system
C. that the Location field contains the correct server name for the CallPilot system
D. that the Secure Sockets Layer (SSL) option is turned on because passwords can only be
passed over SSL
Answer: B
Question 6.
CallPilot desktop messaging has several CallPilot RIs.5.0 feature enhancements.
Which are two of these enhancements? (Choose two.)
A. ping on Startup
B. Global CallPilot Address Book
C. creating personal distribution lists
D. Deliver to Location in Microsoft Outlook
Answer: B, D
Question 7.
The CallPilot RIs. 5.0 has introduced the High Availability feature.
The High Availability feature is available on which CallPilot server platform?
A. 703t
B. 600r
C. 1005r
D. 1002rp
Answer: C
Question 8.
When installing CallPilot Reporter RIs. 5.0 on the standalone Web server, additional required software is also installed.
Which version of Crystal Reports is installed?
A. Crystal Reports 8
B. Crystal Reports X
C. Crystal Reports 8.5
D. Crystal Reports Xl
Answer: D
Question 9.
Which software is required before installing CallPilot Manager on a stand-alone Web server?
A. PC Anywhere
B. Sybase Database
C. Java Runtime Environment
D. Internet Information Server (IIS)
Answer: D
Question 10.
Your customer is upgrading to CallPilot RIs. 5.0. The current keycode authorizes 500 Speech Activated Messaging seats but the customer is currently only using 100 seats.
With the upgrade and a new CallPilot Rls. 5.0 keycode, what two options does the customer have for the unused Speech Activated Messaging seats? (Choose two.)
A. No options are available; the number of seats cannot be reduced.
B. Take no action and retain the unused Speech Activated Messaging seats.
C. Reduce the number of Speech Activated Messaging seats authorized in the new keycode to
100 or more.
D. Reduce the number of Speech Activated Messaging seats authorized in the new keycode to
any number as long as the feature is supported on at least 1 seat.
Answer: B, C
Copyright © 2004 CertsBraindumps.com Inc. All rights reserved.