|
Question 1.
The SAN Router's system address must be configured on ________________ , before any of the mSNS's can communicate with each other.
A. the same Inband network
B. a different Inband network
C. the same Out-of-band network
D. a different Out-of-band network
Answer: A
Question 2.
Name the two which are characteristics of synchronous data replication. (Choose two.)
A. Acknowledgement of data
B. Supports longer distances
C. Increased data protection
D. More cost effective
Answer: A, C
Question 3.
Name the two pieces of information which are needed to login to Element Manager using SNMP. (Choose two.)
A. SNMP management application
B. IP address for the management station
C. Eclipse SAN Router Inband address
D. Eclipse SAN Router management IP address
E. community string
Answer: D, E
Question 4.
Ports 1 and 2 on the McDATA Eclipse 1620 SAN Routers can be used to connect to three connection types. (Choose three.)
A. LAN networks
B. hosts / initiators
C. FC switches
D. MAN / WAN networks
E. targets / storage
Answer: B, C, E
Question 5.
Name the two network variables (where either one or both are present) should you use Fast
Write on an iFCP port. (Choose two.)
A. 100 km of distance between iFCP peer ports
B. 200 km of distance between iFCP peer ports
C. 1 ms of latency on iFCP network
D. 2 ms of latency on iFCP network
Answer: B, D
Question 6.
Name the device which operates at Layer 2 of the OSI Model.
A. router
B. server
C. switch
D. hub
Answer: C
Question 7.
At ITCertKeys.com, you work as a network administrator. 100 servers are deemed ineligible for HBA's and direct attachment to the Fibre Channel fabric, in a data center.
iSCSI drivers have been placed on each server. Through an Ethernet switch, the servers have 100BaseT cards and are aggregated. A single iSCSI gateway (Eclipse 1620) has been attached to a dedicated Ethernet switch via both Gigabit Ethernet (GE) ports. Name the statement which is true.
A. If packets are dropped, flow control is handled by the Data Link Layer (Layer 2) between the
Eclipse and the Ethernet switch.
B. LUN mapping on the Eclipse should be configured to provide a LUN of 1 to all the servers.
C. Compression between the iSCSI initiator and the iSCSI gateway should be set to auto and last
LZO with History
D. In this case, Eclipse iSCSI ports support a fan-in of 50 to 1 without oversubscription.
The ports on this iSCSI gateway are oversubscribed by 2:1.
Answer: D
Question 8.
Name the default baud rate setting of the serial port on a McDATA Eclipse SAN Router.
A. 9600
B. 115200
C. 2400
D. 57600
Answer: A
Question 9.
What is returned to the server from the Fibre Channel Switch, when a server initiates a FLOGI?
A. a register state change notification
B. the name of the switch
C. the server's Fibre Channel address
D. the switch's Fibre Channel address
Answer: C
Question 10.
The increments defined are in __________ Kbps, when using a number to configure the Ethernet port speed.
A. 3000
B. 1.5
C. 1500
D. 10
E. 100
Answer: C
Question 11.
How must they be configured, when configuring mFCP ports?
A. Individually
B. Even number ports
C. In pairs
D. Odd number ports
Answer: C
Question 12.
Between connecting with Telnet or using the Maintenance Port, what is the functional management difference?
A. None
B. Firmware upgrade
C. Performance statistics
D. Internal addressing
Answer: A
Question 13.
Name the default mSAN ID?
A. 0
B. 10
C. 1
D. 30
E. 31
Answer: A
Question 14.
Name the three which are part of a standard iSCSI name in IQN format. (Choose three.)
A. type designator
B. alias
C. unique identifier assigned by the naming authority
D. IP address
E. naming authority
Answer: A, C, E
Question 15.
There is an outline around each FC and Ethernet port in Element Manager, on the McDATA Eclipse 1620 SAN Router. Explain what a red outline indicates about each port.
A. Fibre Channel
B. down
C. power fault
D. disabled
Answer: B
Question 16.
Name the two methods which can be used to configure iSCSI Access Control in a McDATA Eclipse SAN Router. (Choose two.)
A. externally by a third-party TACACS+ server
B. internally by a different McDATA Eclipse SAN Router
C. externally by a third-party RADIUS server
D. internally by the same McDATA Eclipse SAN Router
Answer: C, D
Question 17.
State how many intelligent ports are on an Eclipse 2640 SAN Router.
A. 2
B. 16
C. 12
D. 4
Answer: D
Question 18.
Name the firmware which contains all features for an Eclipse 2640 SAN Router.
A. 2640 SB Firmware
B. 2640 FR Firmware
C. 2640 FF Firmware
D. 2640 EF Firmware
Answer: C
Question 19.
A management IP address of 192.168.111.110 for an Eclipse 1620 SAN Router, ITCertKeys.com has provided. Name the addresses which must be changed.
A. mFCP addresses
B. Intelligent port IP addresses
C. External router addresses
D. Inband addresses
Answer: D
Question 20.
Name the advanced TCP parameter which should be used on a given iFCP port when there is a higher frequency of out of order or retransmitted packets on the network.
A. Compression Method = Fast LZO with History
B. MTU Size = Auto
C. Selective Acknowledgement
D. Fast Write
Answer: C
|
Question 1.
Some of the computers in your company run Microsoft Office 2003. Other computers run Microsoft Office 2007. Users report that when they save documents on computers that run Office 2007, users on computers that run Microsoft Office 2003 are unable to edit those documents. You need to ensure that users on computers that run Office 2003 are able to edit Office 2007 documents.
What should you do?
A - Add the Office Compatibility Pack to the computers that run Office 2007.
B - Add the Office Compatibility Pack to the computers that run Office 2003.
C - Install Office 2003 Service Pack 2 on the computers that run Office 2003.
D - Install MSXML 6.0 on computers that run Microsoft Office 2003.
Answer: B
Question 2.
You are planning to upgrade to Microsoft Office 2007. You need to identify documents that are not compatible with Office 2007.
What should you do?
A - Run the OMPM File Scanner tool.
B - Run the Application Compatibility Analyzer.
C - Run the Office File Converter.
D - Run the Office Customization Tool.
Answer: A
Question 3.
You need to install Microsoft Office 2007 on computers in the Sales department and computers in the Accounting department. The Sales department requires only Microsoft Word and Microsoft Excel. The Accounting department requires only Microsoft Excel and Microsoft InfoPath. You need to deploy Office 2007 to computers in the Sales department and the Accounting department. You create a shared folder named \\Server1\Office.
What should you do next?
A - Copy the Microsoft Office 2007 installation files to the \\Server1\Office folder. Create an .MSP
file for each department. Create a script for each department that uses the appropriate .MSP
file.
B - Copy the Microsoft Office 2007 installation files to the \\Server1\Office folder. Create an .MST
file for each department. Create a script for each department that uses the appropriate .MST
file.
C - In the \\Server1\Office folder, create a folder for each department. Copy the Microsoft Office
2007 installation files to each folder. Create a CUSTOM.MSP file in each folder. Instruct users
to run setup from the appropriate folder.
D - In the \\Server1\Office folder, create a folder for each department. Copy the Microsoft Office
2007 installation files to each folder. Create a CUSTOM.MST file in each folder. Instruct users
to run setup from the appropriate folder.
Answer: A
Question 4.
Your company is deploying Windows Vista. You create a reference computer and capture an image of that computer by using the ImageX utility. You need to modify the reference computer image to meet the following requirements:
Set the Internet Explorer home page to your companys home page.
Remove Games from the image.
Add a new network card device driver.
You must accomplish this task by using the least administrative effort.
What should you do?
A - Use the ImageX utility to mount the image. Copy an unattended setup answer file to the
\Windows folder in the image.
B - Use the ImageX utility to mount the image. Apply an unattended setup answer file to the
image.
C - Restore the image of the reference computer. Modify the configuration of the reference
computer. Recapture an image of the reference computer.
D - Restore the image of the reference computer. Copy an unattended setup answer file to the
\Windows folder on the reference computer. Recapture an image of the reference computer.
Answer: B
Question 5.
You are deploying Microsoft Office 2007 to computers that run Windows Vista. The computers are configured to support the English, Spanish, and French languages. Users report that only the English language is displayed in Office 2007 applications. You need to ensure that Office 2007 displays the English, Spanish and French languages.
What should you do?
A - Add the Microsoft Office 2007 Single Language Packs to the root of the Office 2007
installation share. Instruct users to run the Office 2007 Setup program.
B - Create a subdirectory for each language on the Office 2007 installation share. Add the Office
2007 Single Language Packs to the appropriate subdirectory. Edit the config.xml file on the
installation share. Instruct users to run the Office 2007 Setup program.
C - Use the PKGMGR command to add the Windows Vista language packs to the client
computers. Edit config.xml file on the installation share. Instruct users to run the Office 2007
Setup program.
D - Use the PKGMGR command to add the Windows Vista language packs to the installation
source for Windows Vista. Edit the unattend.xml file in the Windows Vista installation source.
Instruct users to run the Office 2007 Setup program.
Answer: B
Question 6.
You are installing Microsoft Office 2007. You configure two distribution points. One distribution point is named \\Server1\Office2007. The other distribution point is named \\Server2\Office 2007. You need to ensure that if one distribution point becomes unavailable, Microsoft Office 2007 will use the other distribution point.
What should you do? (Each correct answer presents a complete solution. Choose two.)
A - On each distribution server, create an administrative installation point.
B - On the root of each distribution point, create a shortcut which points to the additional
distribution point.
C - Create a Custom.MSP file.
D - Configure the Config.XML file.
Answer: C, D
Question 7.
You plan to deploy Microsoft Office 2007 using a script. You need to create a distribution share for Microsoft Office 2007. You create a shared folder on a server.
What should you do next?
A - Run the Microsoft Office 2007 installation program with the /config switch.
B - Run the Microsoft Office 2007 installation program with the /admin switch
C - Install Microsoft Office 2007 on a reference computer. Copy the MSOCache folder to the root
of the installation share.
D - Copy the installation files from the source media to the root of the shared folder.
Answer: D
Question 8.
You use the Application Compatibility Toolkit (ACT) to analyze computers before deploying Windows Vista. You create a data collection package which contains the Internet Explorer Compatibility Evaluator and the Inventory Collector. Company policy requires that all software package installation be done during non-peak hours. You need to ensure the data collection package is deployed to computers.
What should you do?
A - Create a user logon script. Add the data collection package to the logon script.
B - Create a computer software installation policy in a Group Policy object.
C - Create an SMS Package which contains the data collection package. Advertise the package
to install at a specified time.
D - Create a user software installation policy in a Group Policy object.
Answer: C
Question 9.
You deploy Windows Vista on 500 computers in your network. You discover that one of your applications does not function correctly in Windows Vista. You also discover that the application requires Windows XP Service Pack 2. You need to ensure that the application functions correctly in Windows Vista. You must accomplish this task with the least administrative effort.
What should you do?
A - Disable the User Account Control: Virtualize file and registry write failures to per-user
locations security option.
B - Set the Compatibility mode to Windows XP (Service Pack 2) on the properties of the
application properties
C - Use the Compatibility Administrator to create a new application fix that sets the Operating
System Mode to Microsoft Windows XP (SP2).
D - Use the Compatibility Administrator to create a new application fix that sets the
WinXPSP2VersionLie compatibility mode.
Answer: C
Question 10.
You plan to upgrade computers to Windows Vista. One of the applications uses a custom Windows logon dialog box. You use the Application Compatibility Toolkit (ACT) to collect compatibility information on the computers in your network. You need to ensure that there are no known compatibility issues with the application.
What should you do?
A - Examine the Vista Compatibility Evaluation Report
B - Examine the Update Compatibility Evaluation Report
C - Examine the Impact Analyzer Reports
D - Examine the Impact Application Reports
Answer: A
Copyright © 2004 CertsBraindumps.com Inc. All rights reserved.