|
Question 1.
What can be used to integrate HP-UX 11iv2 system events into HP Systems Insight Manager?
A. IPMI
B. IPv6
C. LDAP
D. WBEM
Answer: D
Question 2.
Which recovery files are backed up in the flash recovery area in Oracle 10g or higher environments? (Select three.)
A. flashback logs
B. online redo logs
C. control file copies
D. current control file
E. archived redo logs
F. full and incremental backup sets
Answer: C, E, F
Question 3.
What must you be aware of when restoring and recovering an Oracle database on a UNIX server system?
A. Proxy copy must be enabled when performing a recovery only.
B. Concurrent restore data streams are limited to 1 when using tape drives.
C. User and group definitions must be the same as defined in the backup ownership.
D. Parallel restore streams must be set individually when using a proxy-copy ZDB session.
Answer: C
Question 4.
What is a feature of HP Data Protector Software when using an Oracle database integration?
A. Online backups are performed every hour by default.
B. It backs up the recovery catalog database by default.
C. It sets the Oracle database automatically in archive mode.
D. It backs up archive logs automatically on disk devices if available.
Answer: B
Question 5.
You are troubleshooting the Microsoft SQL interaction with HP Data Protector Software. The integration is configured correctly, but all database backups fail after a timeout with security error messages.
What is the most probable cause?
A. SqlAdmin service is using the default login password.
B. The SQL administrator is not the same as the HP Data Protector Software administrator.
C. SQL backup permissions are not configured for the HP Data Protector Software user account.
D. SQL Server and HP Data Protector Software Inet services are running under different
accounts.
Answer: D
Question 6.
What is the recommended block size for fast direct mode?
A. 58 kB
B. 64 kB
C. 68 kB
D. 132 kB
Answer: C
Question 7.
What must be done to the Oracle recovery catalog database before it can be backed up by HP Data Protector Software?
A. Disable and purge it.
B. Export it to a binary file.
C. Copy it to a temporary location.
D. Dismount it and put into backup mode.
Answer: B
Question 8.
A customer running Oracle Data Guard in a 24x7 environment is concerned about HP Data Protector Software error management and wants to get an e-mail when an error occurs.
Which error communication method is most suitable?
A. reporting
B. notification
C. event log trigger
D. HP Data Protector Software Oracle Monitor
Answer: B
Question 9.
After removing an Oracle integration in HP Data Protector Software, what must you do to ensure that the Oracle server software functions correctly?
A. Enable Oracle stand alone backup in the ora.ini file.
B. Uninstall Oracle and reinstall it using the secure install method.
C. Rebuild the Oracle binary to remove the link to the HP Data Protector Software Database
Library.
D. Reinstall the Oracle shell to disable the link to the HP Data Protector Software Cell Manager
console.
Answer: C
Question 10.
How can you verify access to the recovery catalog in an Oracle integration?
A. oradb_smb -catalog
B. recovery_log -sqlrc
C. oradblog_bar -recovery
D. rman catalog <Recovery_Catalog_Login>
Answer: D
Question 11.
You are troubleshooting suspected Oracle and HP Data Protector Software internal data transfer issues using the testbar2 utility.
How do you display the output in the HP Data Protector Software GUI?
A. by creating a report on the testbar2 output
B. in the Event Log in the Reporting context
C. in the Monitor context using the Details button
D. in the Reporting context using the Reports button
Answer: C
Question 12.
Which HP Data Protector Software command can you use to delete and re-create a failed Microsoft Exchange Server configuration?
A. mrgcfg
B. mbx_bar
C. omnimsutil
D. omni_ese_util
Answer: B
Question 13.
When using ISEE on an HP-UX server, how can the ISEE client be started or stopped?
A. /opt/hpisee/bin/isee.sh
B. /sbin/init.d/hpservices [start / stop]
C. /sbin/init.d/isee.client [start / stop]
D. /sbin/init.d/ems_proactive [start / stop]
Answer: B
Question 14.
Where does HP Data Protector Software determine the Oracle login information for the recovery catalog on UNIX systems?
A. Oracle RMAN file
B. init.ora configuration file
C. HP Data Protector Software userlist file
D. HP Data Protector Software Oracle configuration files
Answer: D
Question 15.
You create backup specifications in a large Microsoft SQL Server environment with both local and remote devices available.
What is the recommended method to improve the backup performance?
A. Use separate backup specifications for local and remote devices.
B. Use only one object per local device and per backup specification.
C. Create backup specifications for transaction logs using remote devices only.
D. Use a mix of local and remote devices spread evenly across all specifications.
Answer: A
Question 16.
Which utilities can be used to perform a consistency check of a Microsoft Exchange database for preventive maintenance purposes? (Select two.)
A. ccfile
B. eseutil
C. esefile
D. esedbmaint
E. esecheckdb
Answer: B, C
Question 17.
How can you recover an Oracle recovery catalog database?
A. Use RMAN.
B. Perform a Disk Agent offline restore.
C. Use the BACKINT RESTORE command.
D. Perform an online Integration Agent restore.
Answer: A
Question 18.
There is an Oracle restore problem that you cannot resolve from the HP Data Protector Software GUI.
What else can be used to resolve the issue?
A. RMAN CLI
B. ora_bar -restore
C. omnir -ora_recover
D. OB2_ORARESTORHOSTNAME=<hostname>
Answer: A
Question 19.
You need to troubleshoot an HP Data Protector Software and Microsoft SQL Server integration and are unsure about the configuration state.
Which CLI command can be used to check if the configuration is correct?
A. sqlconf -status
B. sql_bar -chkconf
C. sql_smb -status
D. omnicheck -sqlconfig
Answer: B
Question 20.
What is the device concurrency used for Microsoft SQL Server backups?
A. 1
B. 2
C. 3
D. 4
Answer: A
Question 21.
What is the recommended method to configure HP Data Protector Software version 6.0 Cell Manager after migration from HP-UX 11.x to HP-UX V.11.23?
A. Create a local user account on the Cell Manager, log in to it, and use the Command Line
Interface.
B. Create a remote user account on the Cell Manager, connect to it from a remote system and
use telnet.
C. Log in to the Cell Manager locally using the root account, and use the HP Data Protector
Software graphical user interface.
D. Create a remote user account on the Cell Manager, connect to it from a remote system and
use the HP Data Protector Software graphical user interface.
Answer: D
Question 22.
Which mode in an SAP R/3 integration prevents you from performing incremental backups?
A. offline
B. online
C. backint
D. circular logging
Answer: C
Question 23.
What is the purpose of Oracle ASM (Automated Storage Management)?
A. scheduled backup
B. database recovery
C. volume management
D. RMAN catalog maintenance
Answer: C
Question 24.
Which HP Data Protector Software command provides the information required to configure an
SAP R/3 integration?
A. sap_init
B. util_sap
C. sap_conf
D. util_sapdb
Answer: B
|
Question 1.
What is the unit of measure for licensing FSRM?
A. terabytes monitored
B. megabytes monitored
C. number of hosts monitored
D. number of filesytems monitored
Answer: A
Question 2.
You have just installed HP Storage Essentials Standard Edition and completed your first successful discovery. You notice many hosts with question marks and generic names.
Why were these hosts discovered?
A. These are hosts seen in Active Directory.
B. Managed arrays report all WWNs of connected hosts.
C. Managed switches report all WWNs of connected hosts.
D. HP Storage Essentials creates an icon for any host it can ping.
Answer: C
Question 3.
What is required when HP Storage Essentials is managing hosts on a network with firewalls configured?
A. TCP/IP ports for the managed hosts CIM extension must be open on the firewall.
B. Managed hosts and the management server must be configured in a separate private network.
C. The Very Secure FTP server and client components must run on the management server and
the managed hosts.
D. Firewalls must be disabled on the hosts and configured on a gateway which establishes the
connection to the rest of the LAN.
Answer: A
Question 4.
You discovered a Windows host with Emulex HBAs, but no HBA information is collected.
What must you do?
A. Reboot the host.
B. Install HBAnywhere.
C. Install MOFexplorer.
D. Disable the Windows firewall.
Answer: B
Question 5.
What is required for the HP Systems Insight Manager (SIM) console client? (Select two.)
A. latest version of Java installed
B. Java Script disabled in the Web browser
C. Mozilla Web browser on Microsoft Windows
D. Secure Socket Layer 3.0 or Transport Layer Security 1.0
E. cookies enabled to track the corresponding HP SIM session
Answer: D, E
Question 6.
Which additional functionality results from integrating HP Storage Essentials with HP Systems Insight Manager?
A. integration with OVSAM applications
B. intelligent error correction of failed devices
C. automatic detection of database backup failures
D. auto-discovery of SAN and storage resource information
Answer: D
Question 7.
You installed the database for the management server from the CD-ROM set.
What must you do next to ensure correct installation and functionality?
A. Create backup directories.
B. Delete temporary installation directories.
C. Create directories for database tablespaces.
D. Install the Oracle patch from the Database Patch CD-ROM.
Answer: D
Question 8.
Place the HP Storage Essentials Standard Edition installation steps in the correct order by dragging and dropping the boxes.
Answer:
Question 9.
What is a key influence in HP Storage Essentials Standard Edition purchasing decisions?
A. simplified XP storage management
B. simplified EVA storage management
C. simplicity of handling provisioning tasks
D. storage reporting for UNIX, Windows, and Linux hosts
Answer: B
Question 10.
Which Storage Essential Plug-in provides the capability to manage file serving and data sharing solutions?
A. File Manager
B. NAS Manager
C. Capacity Manager
D. Provisioning Manager
Answer: B
Copyright © 2004 CertsBraindumps.com Inc. All rights reserved.