|
Question 1.
SpeedScreem Latency Reduction reduces latency on connections where the round trip latency is between __________.
A. 150-500ms
B. 500-1000ms
C. 1000-2000ms
D. 2000-5000ms
Answer: A
Question 2.
How many virtual channels can the ICA protocol support?
A. 23
B. 32
C. 1024
D. 3200
E. 6400
Answer: B
Question 3.
By default, what TCP port does SSL use to encrypt HTTP traffic?
A. 1494
B. 443
C. 21
D. 1023
E. 401
Answer: B
Question 4.
You create a new ICA Virtual Channel that requires additional parameters to execute.
Where are the parameters stored for use?
A. the pn.ini file
B. the wtclient.ini file
C. the confiq xml file
D. the module ini file
Answer: D
Question 6.
Which statement describes a feature of the ICA Web Client Netscape Plug-in if the plug-in
is not already installed?
A. The plug-in does not to be downloaded if your are using Netscape version 3.0 or above.
B. The plug-in must be manually installed on a client workstation before it can access application
on MetaFrame XP server.
C. The plug-is automatically downloaded to the client workstation and executed each time the
Netscape Navigator Web browser is used to access an ICA hyperlink on a Web page.
D. The plug-in is automatically downloaded to the client workstation and registered with the
Netscape Navigator browser the first time that the Web browser is used to access an ICA
hyperlink on a Web page.
Answer: B
Question 7.
Scenario: During the pilot implementation, it is important to select the appropriate mix of users and IT staff. These users provide feedback that allows the project team toe gather hands on knowledge and experience before moving the environment into production once the results of the pilot are obtained, the project team should determine which factor?
A. If all risks have been identified for the project
B. If they selected the best mix of end users and IT staff for the pilot.
C. If the application are ready to be deployed in a production environment.
D. If necessary performance counters to monitor average network utilization have been validated.
Answer: B
Question 8.
Which statements concerning Zones are correct? (Choose three.)
A. Zones can store license information.
B. Zones names are stored in the data store.
C. A Zone is designed to chance the performance of the serverfarm.
D. New Zones are configured using the Citrix Management console.
E. Separating the server into Zones using their geographical location will not make managing the
server farm more efficient.
Answer: B, C, D
Question 9.
Which statements are correct? (Choose two.)
A. The Citrix ICA protocol is on the Session Layer of the OSI Model.
B. The Citrix ICA protocol is on the Presentation Layer of the OSI Model.
C. If there are no protocols installed on your Windows 2000 server during the install of
MetaFrame XP, an ICA listener port cannot be created until after the protocol has been added.
D. Dialing in to a MetaFrame XP server using a dial-in asynchronous connection provides a
network connection to all servers on the network.
Answer: B, C
Question 10.
You are implementing and automated server scalability test for a 2 Tier client/ server application on a 4 processor server with 4 Gigabytes of RAM. Your find that when 80 concurrent users are running application on the server. The average CPU utilization is 50% and the amount of physical memory consumed is approximately 55% however. No additional users are able to log in. what is the likely problem?
A. Disk queue lengths are to long.
B. Processor queue lengths are too long.
C. The number of system Page Table Entries (PTEs) is exhausted
D. The application is signed- threaded and cannot support users.
Answer: A
Question 11.
Heather has configured access to published application through the Custom ICA Connections wizard. She would like to save small bitmaps below the default size. Where must edit the default setting?
A. Do nothing the bitmap cache is self-sizing.
B. Create folder on the application partition.
C. Right click the Application icon and choose Properties.
D. The bitmap cache is not used with the Custom ICA Connections folder.
Answer: C
Question 12.
Identify the minimum hard disk requirement for Citrix Management Console.
A. 20MB
B. 25MB
C. 40MB
D. 65MB
Answer: B
Question 13.
Scenario. You are implementing a new application into an existing Meta Frame XP Presentation server farm in which all users have roaming profits all users and servers are part of an Active Directory domain. Your have configured group policies so that profiles are deleted upon logoff.
You have a new application that you will be deploying in the farm that writes per user INI fled to the Application Date subfolder of the user profile.
1. Provide the ability to maintain the per user settings in the INI files across session.
2. Provide the fastest possible logins.
How can these design goals be achieved?
A. Implement a policy to delete profiles on logoff.
B. Implement an application compatibility sript run at long in.
C. Implement folder redirection on the Applicant Data Folder.
D. Implement an application compatibility script to run to install time.
Answer: A
Question 14.
Which options for administering client cache can be set within Program Neighborhood? (Choose three.)
A. The maximum bitmap size to be cached.
B. The maximum bitmap size to be cached.
C. The directory where the images will be stored.
D. The persistent cache timeout parameter.
E. The maximum mount of disk space to be used for cached.
Answer: B, C, E
Question 15.
What functions can you perform with the Citrix Management Console's License node? (Choose three.)
A. Remove Citrix licenses.
B. Add Citrix licenses.
C. Activate Windows 2000 Server licenses.
D. Set the product code for MetaFrame XP.
E. Assign product license counts to specific MetaFrame XP servers.
Answer: A, B, E
|
Question 1.
ITCertKeys.com is a semiconductor discrete manufacturing organization. It has its own manufacturing and distribution centers located globally.
It has these operating Units:
US - USA operating unit
CAN - Canadian operating unit
UK - UK operating unit
MX - Mexican operating unit
IND - India operating unit
SPA - Spain operating unit
FRA - France operating unit
NL - Netherlands operating Unit
GER - Germany operating unit.
These are the inventory organizations that exist in each operating unit:
Inventory Org - Operating unit
--------------------------------------------
CK (Master Org) - US
US1 (Child Org) - US
US2 (Child Org) - US
CA1 (Child Org) - CAN
MX1 (Child Org) - MX
IN1 (Child Org) - IND
SP1 (Child Org) - SPA
FR1 (Child Org) - FRA
NL1 (Child Org) - NL
GE1 (Child Org) - GER
Which three statements are true? (Choose three.)
A. Master organization CK cannot be shared across operating units.
B. All inventory organizations do not need to be in the same operating unit to assign items.
C. Items defined in CK organization can be assigned to US1,US2, NL1 and MX1 inventory
organizations.
D. Organization items in the inventory responsibility assigned to FRA operating unit can be
restricted, to not view the organization items assigned to US2 inventory organization.
E. You can define an item in IN1 inventory organization and assign it to GE1 inventory
organization.
F. Items cannot be assigned to inventory organizations across operating units.
Answer: B, C, D
Question 2.
You specified cycle count measurement error values when you defined your item at the master item or organization item level. You also specified a cycle count quantity variance approval tolerance at the cycle count item level. If the actual cycle count quantity for your item differs from the system on-hand quantity by less than the specified measurement error, Oracle Inventory _____.(Select one answer)
A. does not consider cycle count approval tolerance but makes a cycle count adjustment
B. applies the measurement error to the cycle count approval tolerance before the approval
decision and makes a cycle count adjustment when approved
C. does not consider cycle count approval tolerance and does not make a cycle count adjustment
D. applies the measurement error to the cycle count approval tolerance before the approval
decision and does not make a cycle count adjustment when approved
Answer: B
Question 3.
Which three statements are true about defining an item using a template? (Assume that there are no Interdependent Attributes.) (Choose three.)
A. A template can be applied only at the master organization level.
B. A template applied to a master item, which has already been assigned to a child organization,
can still update the organization-controlled item.
C. Modifying an item template will automatically update the items that were previously defined
using that template.
D. A template can be applied at the master or child organization levels.
E. You can apply multiple templates to an item.
F. Template application is additive. If you apply a second template to an item, the item will retain
the values of all the attributes that were not enabled by the second template.
G. Template application is exclusive. If you apply a second template to an item, the item will not
retain any values of the prior template.
Answer: D, E, F
Question 4.
You are setting up a requisition move order for which approval is required. At the organization level, you have defined the following:
However, the approval process is not being enabled for the organization item.
What is a possible reason?
A. The subinventory source type has not been set to pull level.
B. The Move Order Timeout Action has been set to a value greater than zero.
C. A planner has not been assigned to the organization item.
D. The Move Order Timeout Period has been set to a value greater than zero.
Answer: C
Question 5.
From which Oracle applications can 'in-transit' receipts be received into an organization?
A. Purchasing and Work in Process
B. Purchasing and Order Management
C. Purchasing
D. Purchasing, Inventory, and Work in Process
Answer: C
Question 6.
A customer who distributes widgets has a warehouse with locations where material is stored. In the customer's current system, users may receive material on a purchase order and indicate the location where it should go, but when the material is physically sent to the location, they may discover that the location is full.
What is the best way to solve the problem?
A. Set up the locations as locators, and use the capacity tab of the locator definition form to enter
the maximum number of items that can be stored in the locator.
B. Set up each location as a subinventory and select the nettable flag.
C. Set up each location as a subinventory and select the Allow Reservation flag.
D. Set up each location as an organization and create locators in the organization.
Answer: A
Question 7.
You specified cycle count measurement error values when you defined your item at the master item or organization item level. You also specified a cycle count quantity variance approval tolerance at the cycle count item level. If the actual cycle count quantity for your item differs from the system on-hand quantity by less than the specified measurement error, Oracle Inventory _____.(Select one answer)
A. does not consider cycle count approval tolerance but makes a cycle count adjustment
B. applies the measurement error to the cycle count approval tolerance before the approval
decision and makes a cycle count adjustment when approved
C. applies the measurement error to the cycle count approval tolerance before the approval
decision and does not make a cycle count adjustment when approved
D. does not consider cycle count approval tolerance and does not make a cycle count adjustment
Answer: B
Question 8.
Which three are Oracle Inventory replenishment methods? (Choose three.)
A. MRP (Materials Requirement Planning)
B. Replenishment Counting
C. Safety Stock
D. Kanban
E. Min-max Planning
Answer: B, D, E
Question 9.
You are defining the staging subinventory for your sales order pick release rule.
Which flag should be set on the subinventory setup for pick release to work?
A. The subinventory should have the Nettable flag selected.
B. The subinventory should have the Depreciable flag selected.
C. The subinventory should have the Reservable flag selected.
D. The subinventory should have the Pre-Processing Lead Time field populated.
Answer: C
Question 10.
ITCertKeys.com has portable bar code readers that are used to scan and read data about the amount of time charged on a resource that has been utilized on the manufacturing floor. This data about utilization is then processed in the Oracle Work in Process module by using a _____.
A. Material Transaction Manager
B. Cost Manager
C. Lot Move Transaction Manager
D. Concurrent Manager
E. Move Transaction Manager
Answer: C
Copyright © 2004 CertsBraindumps.com Inc. All rights reserved.