|
Question 1. A system administrator needs to halt a zone. Which two commands properly shut down a zone? (Choose two.) A. z halt zone name B. zoneadm halt zone name C. z login zone name init 5 D. z console zone name init 0 E. z login zone name shutdown -y -i5 Answer: C, E Question 2. Which method can be used to boot a zone? A. The zone administrator runs z loginboot. B. The zone administrator runs z login -C boot. C. The zone administrator logs into the zone and runs boot. D. The global zone administrator runs zoneadm -z boot. Answer: D Question 3. After creating a zone using the following: zonecfg -z newzone zonecfg:newzone> create zonecfg:newzone> set zone path=/export/zone/newzone zonecfg:newzone> add net zonecfg:newzone:net> set address=192.168.0.2 zonecfg:newzone:net> set physical=bge0 zonecfg:newzone:net> end Which command should you run next? A. zoneadm -z newzone boot B. zoneadm -z newzone ready C. zonecfg -z newzone check D. zoneadm -z newzone install Answer: D Question 4. For a local zone in the installed state, which statement is true? A. Local zone file systems are mounted. B. The local zone has an associated virtual platform. C. Network interfaces for the local zone are plumbed. D. Packages are installed under the local zone root path. E. The local zone has a unique ID assigned by the system. Answer: D Question 5. Which three commands can the system administrator use in the global zone to cause a running local zone to reboot? (Choose three.) A. reboot -z B. z login reboot C. zoneadm -z boot D. zoneadm -z reboot E. halt -z boot -z F. zonedadm-z halt; zoneadm-z boot Answer: B, D, F Question 6. On x86-based systems, for which two locations can the ability to utilize PXE network boot be enabled? (Choose two.) A. DVD B. boot diskette C. system BIOS D. network adapter configuration tool Answer: C, D Question 7. What are two requirements to Jump Start systems with Solaris OS using PXE boot? (Choose two.) A. an FTP server with x86 install images B. an install server with x86 install images C. a DHCP server with appropriate vendor options configured D. a BOOTPARAM server with appropriate vendor options configured Answer: B, C Question 8. Given the add_install_client script executed with the options: # ./add_install_client -d -b "input-device=ttya" -b "output-device=ttya" SUNW.i86pc i86pc Which two statements are true? (Choose two.) A. The console is directed to a serial port. B. The console is directed to the video port. C. This applies to all x86-based systems being network installed using PXE. D. This applies only to the system with a host name of SUNW.i86pc being network installed using PXE. E. The system to be installed using PXE must be booted using a diskette before it accesses the network. Answer: A, C Question 9. You need to install Solaris 10 OS on five servers that will support the engineering group that is working on a highly sensitive project. The group requests that you install only minimum network services. Which Solaris OS installation cluster should you install? A. SUNW Cuser B. SUNW Creq C. SUNW Crnet D. SUNW Cmreq Answer: C Question 10. You have a SPARC-based server with Solaris 8 OS installed on it, and you want to upgrade that system to run Solaris 10 OS. According to company policy, all installations must be done over the network, and network installations must be done using a secure protocol. Which installation method must you use? A. a WAN boot installation B. a Jump Start installation C. a Flash Archive installation D. the Solaris Live Upgrade method using the lu command and a spare disk drive Answer: A Question 11. You want to install Solaris 10 OS on the x86 system that you built yourself. Which configuration meets the minimal requirements for installation? A. x86 32-bit platforms (1200 megahertz or faster processor is recommended) 64 megabytes of memory 2-3 gigabytes of disk space (depending on what software groups are installed) access to a BIOS-supported bootable CD-ROM/DVD drive or a floppy drive and a CD- ROM/DVD drive keyboard, 8 megabit video RAM, monitor, and mouse B. x86 32-bit platforms (90 megahertz or faster processor is recommended and hardware floating-point support is required), or AMD Opteron, AMD Athlon, and Intel EM64T 64-bit processors 128 megabytes of memory 40 gigabytes of disk space (depending on what software groups are installed) access to a BIOS-supported bootable CD-ROM/DVD drive or a floppy drive and a CD-ROM/DVD drive keyboard, monitor, and mouse C. x86 32-bit platforms (120-megahertz or faster processor is recommended and hardware floating-point support is required), or AMD Opteron, AMD Athlon, and Intel EM64T 64-bit processors 128 megabytes of memory 2.4 gigabytes of disk space (depending on what software groups are installed) access to a BIOS supported bootable CD-ROM/DVD drive or a floppy drive and a CD-ROM/DVD drive PXE compatible keyboard, monitor, and mouse D. x86 32-bit platforms (120 megahertz or faster processor is recommended and hardware floating-point support is required), or AMD Opteron, AMD Athlon, and Intel EM64T 64-bit processors 256 megabytes of memory 5 to 7 gigabytes of disk space (depending on what software groups are installed) access to a BIOS-supported bootable CD-ROM/DVD drive or a floppy drive and a CD-ROM/DVD drive or a Jump Start PXE installation server (PXE BIOS support is required) HCL compatible keyboard, graphics card, monitor, and mouse Answer: D Question 12. There is a new LAN being planned and the project coordinator asks which name services are available choices in a Solaris 10 OS installation. Which five name services are available on Solaris 10 OS? (Choose five.) A. NIS B. XNS C. ARP D. DNS E. NIS+ F. None G. LDAP H. RARP Answer: A, D, E, F, G Question 13. Your x86-based system has a BIOS that does not support booting of a CD-ROM, DVD-ROM, or network, and you want to install Solaris 10 OS on your system. Which procedure must you use? A. You use PXE with Custom Jump Start. B. You must boot of a Solaris 10 PXE diskette. C. You must boot of a Solaris 10 Device Configuration Assistant diskette. D. You must boot of the hard drive and install the software from your current OS. Answer: C Question 14. There is a project that requires a large number of systems to be re-installed on the network. Each installation needs to be hands off and tailored to the task for which the system is intended. Which installation method allows for the specific tailoring of these installs? A. Solaris Live Upgrade software B. Custom Jump Start Installation C. Solaris OS installed from a tape device D. an install from a single Solaris Flash archive Answer: B Question 15. A company has upgraded their hardware and their new workstations have sufficient disk space to store the online man pages, rather than sharing them from the server. Which is the minimum Solaris OS software group that contains the man pages? A. SUNWClib B. SUNWCreq C. SUNWCman D. SUNWCprog Answer: D
|
Question 1.
A company needs to purchase a 30 node cluster.
Which of the following best meets this requirement if space is a major concern?
A. p5-505
B. p5-510
C. p5-520
D. IntelliStation POWER 285
Answer: A
Question 2.
A customer needs a deskside system to support their 2D graphics environment. They also may have a future requirement to support a small Linux partition.
Which of the following systems will meet their requirements?
A. p5-505
B. p5-510
C. p5-520
D. IntelliStation POWER 285
Answer: C
Question 3.
A customer has a need for a database server and wants to take advantage of multi-path I/O for enhanced availability and performance.
Which of the following best meets this need?
A. p5-520 1 processor
B. p5-510 2 processors
C. p5-520 2 processors
D. p5-510 1 processor
Answer: C
Question 4.
Which of the following is a no-charge feature in AIX that allows for installation of operating systems, maintenance level code, and software packages such as SAP or Oracle, and also provides an easy backup and recovery strategy for disaster recovery?
A. mksysb
B. sysback
C. Tivoli Storage Manager (TSM)
D. Network Install Manager (NIM)
Answer: D
Question 5.
A small company would like to setup automated patch updates for their new AIX 5L V5.3 system.
Which command would accomplish this?
A. suma
B. alien
C. mksysb
D. update_all
Answer: A
Question 6.
Which of the following statements about HACMP is true?
A. All the nodes in an HACMP cluster should be running on identical hardware and software.
B. All the nodes in an HACMP cluster should be running on the same model of pSeries server.
C. All the nodes in an HACMP cluster should be running the same version of AIX and HACMP at
all times
D. All the nodes in an HACMP cluster should be running the same version of HACMP to enable
all its functions
Answer: D
Question 7.
Which of the following commands is used to install packages in a Linux partition?
A. rpm
B. tar
C. loader
D. installp
Answer: A
Question 8.
In which of the following can a technical specialist find the supported list of IBM hardware for Linux on POWER5?
A. pSeries Performance Report
B. IBM configurator for e-business
C. IBM PCI Adapter Placement Guide
D. Linux on POWER Facts and Features Report
Answer: D
Question 9.
What command can be use to clone one system to another in a very short amount of time with quick recovery?
A. mksysb
B. sysback
C. backupios
D. alt_disk_install
Answer: D
Question 10.
A customer requires a server with one Ethernet connection, one SAN fabric card, and one SCSI card installed, and they plan to reserve three PCI slots for future needs.
Which of the following servers meets these needs?
A. p5-505
B. p5-510
C. p5-520
D. IntelliStation POWER 285
Answer: C
Copyright © 2004 CertsBraindumps.com Inc. All rights reserved.