|
Question 1. What happens if the device firmware update process is interrupted? A. It will restart after the device is rebooted. B. The device will return to the older firmware version. C. The device can become inoperable and require physical repair. D. It will continue when the firmware update program is restarted. Answer: C Question 2. If Command View TL is not available, what can be used to access the log files in the Interface Manager card? A. Telnet B. Perl scripts C. anonymous FTP D. a serial connection Answer: C Question 3. What is important to remember when changing from Manual to Automatic mode of the Interface Manager? A. All drives must be taken offline. B. Fibre Channel cables must be unplugged. C. Interface controllers must be powered off first. D. Any customizations created in Manual mode will be lost. Answer: D Question 4. How can you test the communication between the management station and any selected Interface Manager card in an ESL E-Series library from Command View TL? A. Run the checkIM command in the CLI. B. Select Support Tab > Tools > Open the Interface Manager Check dialog box. C. Select Actions > Connectivity Check to open the Connectivity Check dialog box. D. Select Support Tab > Communication Check to open the Communication Check dialog box. Answer: C Question 5. Which screen in Command View ESL shows the number of full mail slots in use? A. Inventory B. Health Summary C. Slot Configuration D. Component Status Answer: A Question 6. Which port number is required when starting a Command View TL session? A. 2301 B. 4095 C. 4444 D. 5555 Answer: B Question 7. You are performing a firmware upgrade using Command View TL and a Telnet session terminates it prematurely. What is the most likely outcome? A. The Telnet session is automatically aborted. B. Telnet automatically aborts the other session, but the upgrade continues. C. Command View TL takes precedence and continues the firmware upgrade. D. The firmware upgrade aborts and the device being upgraded may need physical repair. Answer: D Question 8. What does the cabinet controller assembly of an ESL E-Series tape library provide a SCSI interface to? A. tape devices B. library robotics C. management interface card D. e2400-160 Interface Controller Answer: B Question 9. Which capabilities of a TCP/IP connection are delivered by the Simple Internet Protocol Plus (SIPP)? A. small packets and ECC B. error handling and retries C. increased bandwidth and performance D. faster command propagation on inexpensive copper interconnect Answer: B Question 10. For which connection, other than the cabinet controller, is the I2C network cable used? A. external LANs B. cluster controllers C. interface management cards D. Fibre Channel interface controllers Answer: B
|
Question 1. Which utility can be used to reconfigure SAN configured libraries? A. uma B. devbra C. sanconf D. omniupload Answer: C Question 2. What could cause an export of a tape within a library to fail? A. if all drives are busy B. if the mailslot is full C. if the robotics is busy D. if the media is protected Answer: D Question 3. Which tool can be used to retrieve debug and log files from various client systems? A. omnidlc B. get_info C. omnicellinfo D. omnihealthcheck Answer: A Question 4. Which command can be used to check if the inet service is up and running on a member of the Data Protector cell? A. arp -a B. omnistat C. omnisv -status D. telnet5555 Answer: D Question 5. Match the Data Protector features with the associated management tasks by dragging and dropping the boxes. Answer: Question 6. Match the correct version of Data Protector to the feature released with that version by dragging and dropping the boxes. Answer: Question 7. What is the default Data Protector behavior if you have multiple hard links to the same file? A. Links are not backed up. B. The file is backed up only once. C. Each hard link is backed up as a file. D. The links are converted to soft links and backed up. Answer: B Question 8. After installation, which Data Protector components must be installed manually regardless of the Cell Manager platform? (Select two.) A. NetWare Agents B. Windows 2000 Agents C. Installation Servers D. Application Agents E. Solaris Agents Answer: A, C Question 9. When performing a manual configuration using the command line, you can create a new logical device by defining it in a temporary file in the devices directory. How is the Media Management database updated with this information? A. automatically when the device schedule is invoked B. with the omnidownload command C. with the omniupload command D. with the omniupdate command Answer: C Question 10. You have just installed an HP-UX client manually and successfully imported the client into your HP-UX Cell Manager. Which file contains the information about the client (agents and versions)? A. /etc/opt/omni/cell/clients B. /etc/opt/omni/cell/cell_info C. /etc/opt/omni/cell/cell_clients D. /etc/opt/omni/cell/agents Answer: B
Copyright © 2004 CertsBraindumps.com Inc. All rights reserved.