Question 1.
You accidentally initiated an abort sequence. As a consequence, your SPARC-based SYSTEM WENT INTO THE prom MODE.

Which two actions disable the default keyboard abort sequence? (Choose two)

A. detach serial console device
B. run the kbd -a disable command
C. run the eeprom command to disable KEYBOARD_ABORT
D. in PROM mode, change the value of keyboard to disable
E. edit / etc/default/kbd to change the value of the variable KEYBOARD_ABORT to disable

Answer: B, E

Question 2.
Your x86-based system with Solaris 10 OS installed on it is not booting correctly. You think the problem might be that a BIOS setting is not correctly configured. 

What should you do to abort the boot process and reboot into the BIOS configuration menu?

A. While holding down the reset button, you power cycle the system.
B. You press the middle mouse button, When the screen times out, you enter the BIOS configuration menu and examine the BIOS settings.
C. You press the stop-A keys then typ reset-all. You reboot directly into the BIOS configuration menu and examine the BIOS settings.
D. You press the Ctrl-Alt-Del keys and reboot the system, or press the reset button. When the  screen tells indicates the key to enter the BIOS, you press it and examine your BIOS settings.

Answer: D

Question 3.
Given:
ap: : sysinit:/sbin/sutopush -f/etc/iu.ap
sp: : sysinit:/sbin/soconfig -f /etc/sock2path
smf: :sysinit:/lib/svc/bin/svc.startd >/dev/msglog 2<>/dev/msglog /dev/msglog 2<>/dev/msglog

Which two statements are true? (choose two)

A. This file must be read by the process inetd.
B. When booting this system, svc.startd will start.
C. This is a part of the content of the /etc/inittab file
D. This system starts/lib/svc/bin/svc.startd for run level 1.
E. When this system gets the powerfail signal, svc.startd will be respawned.

Answer: B, C 

Question 4.
There is a problem on a SPARC-based system that has several permanent, customized device aliases . The system's use of these aliases needs to be temporarily disabled, so that when the problem is cleared, they can be enabled without having to redefine them.

Which sequence of OBP commands temporarily disables the customized device aliases defined on the system?

A. use-nvramrc=false
    reset
B. use-nvramrc?=false
    reset
C. setenv use-nvramrc? false
    reset
D. setenv use-nvramrc? = false
    reset

Answer: C

Question 5.
An x86-based laptop has just had Solaris 10 OS installed. The graphics configuration has NOT been automatically detected and it is running without graphics.

Which program can you run to create an Xsun configuration file?

A. /user/X11/bin/Xserver
B. /user/dt/bin/xsession
C. /usr/x11/binxorgconfig
D. /usr/openwin/bin/kdmconfig
E. /usr/x11/bin/xorg -configure

Answer: D

Question 6.
The SPARC-based workstation system in your accounts department need their PROMs upgraded. Some of the systems fail to upgrade.

What is the cause?

A. The patch is corrupt.
B. The systems do not have enough memory
C. The write protect jumper has not been set correctly.
D. The system is running an earlier version of Solaris OS.

Answer: C

Question 7.
A SPARC-based system does not boot and displays the message:
"Timeout waiting for ARP/RARP packet"

Which three actions should you take to check the boot environment of the system? (Choose three)

A. check if the frame buffer is working properly
B. check if the NVRAM alias net is set properly
C. check if the NVRAM alias boot-file is set properly
D. check if the PROM variable boot-device is set properly
E. check if the PROM variable local-mac-address?

Answer: B, D, E

Question 8.
 

You receive a complaint from a user who is unable to use the SSH service to access the user's lab system. You use a serial line to get in and check the SSH service. The svcs output is shown in the exhibit.

What has caused the disruption of the SSH service?

A. The service is disabled.
B. The contract_id is missing
C. There is no "next state" defined
D. One of the dependencies has NOT been met.

Answer: D
As you can see /network/physical is disabled
One of dependencies has not been meet therefore ssh not running
So right answer is D

Question 9.
A SPARC-based system, but you are not sure of the physical path information;

Which OBP command shows you this information/

A. printenv
B. probe-all
C. show-devs
D. prtdiag -v
E. probe-scsi-all

Answer: C

Question 10.
As system administrator, you are asked to shut down the Apache HTTPD service that is running on a development server. You run the svcs grep apache command, and receive this output.
Legacy_run Feb_02 1RC:/ETC/RC3_D/S50APACHE

Based on this output, which two statements are tru?

A. This service is managed by LRC.
B. This service is NOT managed by SMF
C. Any legacy_run state can NOT be manually shut down.
D. In order to shut down this service, you need to execute the shutdown script in the /tc/init.d directory
E. In order to shut down this service, you need to execute the following shutdown script svcadm –v disable /etc/init.d/s50apache

Answer: B, D

	Web www.certsbraindumps.com