|
Question 1.
What happens during an active BlackBerry MVS call when a failover is initiated by the BlackBerry MVS Console? (Choose one.)
A. Active BlackBerry MVS Wi-Fi calls are preserved
B. Active BlackBerry MVS Voice over Mobile calls are preserved
C. All Active BlackBerry MVS calls are dropped without notification
D. All Active BlackBerry MVS calls are preserved
E. All Active BlackBerry MVS calls are dropped after the notification tone
Answer: D
Question 2.
Which type of database authentication is required if BlackBerry MVS is installed on a different Microsoft Windows domain than the BlackBerry Enterprise Server? (Choose one.)
A. Microsoft Windows authentication
B. Microsoft SQL Server authentication
C. Authentication set todb_owner
D. Trusted authentication
Answer: B
Question 3.
For BlackBerry devices that operate on GSM networks, which Voice over Mobile call direction offers optimal performance and reliability? (Choose one.)
A. BlackBerry device-initiated
B. SIP Line
C. SIP Trunk
D. PBX-initiated
E. Voice over Wi-Fi
Answer: D
Question 4.
What are three functions of the SIP Line connection between the BlackBerry MVS Session Manager and the PBX? (Choose three.)
A. Registering BlackBerry MVS users with the PBX
B. Communicating Call setup messages
C. Reporting on the health of the BlackBerry MVS Session Manager
D. Exchanging KPML messages
E. Performing PBX directory lookups
Answer: A, B, D
Question 5.
Which logging level in the BlackBerry Mobile Voice System Configuration tool logs the SIP messages between the BlackBerry MVS Server and PBX? (Choose one.)
A. Info
B. Severe
C. Warning
D. Finer
E. Finest
Answer: E
Question 6.
The following is a sample of which type of log file? (Choose one.)
A. BlackBerry MVS Session Manager (BBSM)
B. BlackBerry MVS SIP (BBSIP)
C. BlackBerry MVS Call Detail Record (CDR)
D. BlackBerry Dispatcher (DISP)
E. BlackBerry Router (ROUT)
Answer: A
Question 7.
What is the maximum round trip ping time supported between Cisco Unified Communications Manager and the BlackBerry MVS Session Manager? (Choose one.)
A. 40 milliseconds
B. 80 milliseconds
C. 120 milliseconds
D. 240 milliseconds
E. 480 milliseconds
Answer: D
Question 8.
What is the purpose of the line port in the BlackBerry MVS Telephony Connector configuration? (Choose one.)
A. To allow the BlackBerry MVS Session Manager to receive BlackBerry-initiated calls from the
SIP Line on the PBX
B. To allow the BlackBerry MVS to forward calls using the SIP Line on the PBX to the mobile
number of the BlackBerry device
C. To allow BlackBerry MVS to initiate calls using the SIP Line on the PBX to the mobile number
of the BlackBerry device
D. To allow BlackBerry MVS Clients to register as a BlackBerry MVS Client on the PBX using the
SIP Line
Answer: D
Question 9.
What is the primary function of the BlackBerry Dispatcher in the BlackBerry MVS Solution? (Choose one.)
A. It compresses and encrypts all data that BlackBerry devices send and receive. The BlackBerry
Dispatcher sends the data through the BlackBerry Router to the BlackBerry MVS Session
Manager.
B. It compresses and encrypts all data that BlackBerry devices send and receive. The BlackBerry
Dispatcher sends the data through the BlackBerry Router, to and from the wireless network.
C. It compresses and encrypts all data that BlackBerry devices send and receive. The BlackBerry
Dispatcher sends the data through the media gateway, to and from the wireless network.
D. It compresses and encrypts RTP traffic that BlackBerry devices send and receive. The
BlackBerry Dispatcher sends the data through the media gateway, to and from the wireless
network.
E. It compresses and encrypts RTP traffic that BlackBerry devices send and receive. The
BlackBerry Dispatcher sends the data through the BlackBerry Router, to and from the wireless
network.
Answer: B
Question 10.
An organization has a hunt group that is configured in the PBX with multiple outgoing trunks. Each trunk is assigned a unique Caller Identification Number.
Where must each Caller Identification Number be added to ensure that PBX-initiated calling will work? (Choose one.)
A. The MVS locations field in the BlackBerry MVS Console
B. The BlackBerry MVS Client on the BlackBerry device
C. The BlackBerry MVS Session Manager in the BlackBerry MVS Console
D. The BlackBerry MVS Telephony Connector in the BlackBerry MVS Console
Answer: D
|
Question 1. When upgrading a standalone Cisco UCS C-Series server, which method is correct? A. direct upgrade on all components B. Cisco Hardware Upgrade Utility C. Cisco Host Upgrade Utility D. Cisco Server Upgrade Utility Answer: C Explanation: Question 2. In a standalone Cisco UCS C-Series server, which recommendations can be used to upgrade the BIOS? A. Cisco IMC B. Cisco UCS Manager C. iFlash32 Utility D. Flash ROM Utility E. EFI Interface F. Cisco Host Upgrade Utility G. USB Flash Utility Answer: F Explanation: Question 3. What are the default settings of the Cisco IMCCIMC NIC properties on a standalone Cisco UCS CSeries server? A. 'Shared LOM' NIC mode with 'Active-active' NIC redundancy and DHCP enabled B. 'Shared LOM' NIC mode with 'Active-standby' NIC redundancy and DHCP enabled C. 'Dedicated' NIC mode with 'Active-standby' NIC redundancy DHCP disabled D. 'Dedicated' NIC mode with 'None' NIC redundancy and DHCP enabled E. 'Cisco Card' NIC mode with 'Active-active' NIC redundancy and DHCP enabled Answer: D Explanation: Question 4. Which ports can access the Cisco IMC if you select Shared LOM NIC mode in the Cisco IMC Configuration Utility for a Cisco UCS C-Series server? A. the ports on an installed Cisco network adapter card B. the two 1-Gb Ethernet ports C. the two 10/100 management ports D. the two 10/100 management ports, but each port has a default setting Answer: B Explanation: Question 5. Which NIC redundancy modes allow the LOMs to be discovered by the operating system or hypervisor? A. Dedicated mode B. Active/Active C. Active/Standby D. Cisco Card Mode Answer: A Explanation: Question 6. Which two are true with respect to the unified ports on the Cisco Unified Computing System 62XX Fabric Interconnect? (Choose two.) A. The port mode is automatically discovered after plugging in a LAN or Fibre Channel-attached cable. B. By default, unified ports that are changed to Ethernet port mode are set to uplink Ethernet port type. C. Ethernet ports must be grouped together in a block and must start with the first port and end with an odd numbered port. D. Alternating Ethernet and Fibre Channel ports is supported on the expansion module. E. After making port mode changes on an expansion module, the module will reboot. F. In a standalone configuration, making port mode changes to the fixed module will not cause the fabric interconnect to reboot. Answer: C, E Explanation: Question 7. Which two are true with respect to the switching modes on the Cisco Unified Computing System 62XX Fabric Interconnect? (Choose two.) A. End-host mode presents a link to a northbound uplink switch as a host trunk with loop Detection that is provided by STP. B. For northbound traffic, server MAC addresses are statically pinned to an uplink; the return path is controlled by the unified fabric switches. C. A fabric interconnect port in Ethernet switching mode appears to the uplink switch as a host with many MAC addresses. D. Server-to-server traffic on a common VLAN are locally switched by the fabric interconnect and not the northbound switches. E. A MAC forwarding table is not used to forward traffic to the uplink switch. F. A MAC address forwarding table is maintained for server-to-server communications across VLANs. Answer: D, E Explanation: Question 8. What is true statement concerning port personalities on the Cisco Unified Computing System 62XX Fabric Interconnect? A. Fibre Channel uplink ports must operate in Fibre Channel switching mode. B. The fabric interconnects use native FCoE storage ports to directly attach to the SAN infrastructure. C. By default, all Fibre Channel ports are unconfigured. D. The Fibre Channel uplink ports do not support VSAN trunking and Fibre Channel port channels. E. The Fibre Channel storage ports support VSAN trunking and Fibre Channel port channels. Answer: C Explanation: Question 9. What is a true statement concerning automatic Fibre Channel pinning on a Cisco Unified Computing System 62XX Fabric Interconnect? A. By default, uplink Fibre Channel interfaces are configured for VSAN trunking. B. Using NPV, each downstream server will be pinned to an uplink port that is based on a PIN group. C. The Fibre Channel pinning process is implemented differently than end-host MAC address pinning. D. With VSAN trunking, the automatic pinning of server traffic to Fibre Channel uplink ports will be based on the server WWN. Answer: D Explanation: Question 10. The Cisco UCS administrator has the chassis discovery policy set to "2-link". The administrator connects a new chassis to the Cisco UCS 6200 Series Fabric Interconnects using four links. Which option about link utilization is true? A. The Cisco UCS will use two links until the chassis is reacknowledged, after which it will use all four links. B. The Cisco UCS will use all four links for discovery. C. The Cisco UCS will use only two links. The other two links are unusable. D. The Cisco UCS will use only two links. However, the administrator can manually pin traffic to the extra links by using service profiles. Answer: A Explanation:
Copyright © 2004 CertsBraindumps.com Inc. All rights reserved.